• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.179-184
• /
• 2021

This study aimed to determine the optimal thickness of the active layer and scan mode for a flexible radiochromic film (F-RCF) based on the active lithium salt of pentacosa-10,12-diynoic acid (LiPCDA). F-RCFs of 90, 120, 140, and 170-㎛ thickness were fabricated using LiPCDA. Several pieces of the F-RCFs were exposed to doses ranging from 0 to 3 Gy. Transmission and reflection modes were used to scan the irradiated F-RCFs. Their dose-response curves were obtained using a second-order polynomial equation. Their sensitivity was evaluated for both scanning modes, and the uniformity of the batch was also examined. For both the transmission and reflection modes, the sensitivity increased as the film thickness increased. For the reflection mode, the dose response increased dramatically under 1 Gy. The value of the net optical density varied rapidly as the thickness of the film increased. However, the dose-response curves showed a supralinear-curve relationship at doses greater than 2 Gy. The sensitivity of the reflection scan at doses greater than 2 Gy was higher than that of the reflection scan within 0-2 Gy. The sensitivity steadily decreased with increasing doses, and the sensitivity of the two modes was within 0.1 to 0.2 at 2 Gy and was saturated beyond that. For the transmission scan, the sensitivity was approximately 0.2 at 3 Gy. For the intra-batch test result, the maximum net optical density difference of the intra-batch was 5.5% at 2 Gy and 7.4% at 0.2 Gy in the transmission and reflection scans, respectively. In the low-dose range, film thickness of more than 120-㎛ was proper in the transmission mode. In contrast, the transmission mode showed a better result compared to the reflection mode. Therefore, the proper scan mode should be selected according to the dose range.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.112-114
• /
• 1990

A method for fabrication of holographic optical elements (HOE) using dichromated gelatin (DGG) as a recording material is presented. we describe the holographic properties of the DGG and the processing techniques. Holographic characteristics of the DGG including exposure characteristics, diffraction efficiency and angular sensitivity are also discussed. The diffraction efficiency of the obtained holographic grating is about 84%.

• 센서학회지
• /
• 제26권5호
• /
• pp.338-341
• /
• 2017

We have investigated a temperature sensor on a thermal expansion effect of a fused optical fiber coupler. Both side of the fused tapered region of the coupler were fixed on a metal support to induce the high thermal expansion effect. The sensor showed that the peak coupling wavelengths were shifted to shorted wavelength region with increased of environmental temperature. The sensitivity of the sensor was $0.12nm/^{\circ}C$.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.128-129
• /
• 2003

최근 수년간 polarimetry, Raman spectroscopy, near infrared (NIR) absorption spectroscopy, NIR scattering, optoacoustics 등의 방법을 통하여 비침습적으로 Glucose의 농도를 측정하려는 연구가 많이 시도되었다. 일반적으로 이들 방법은 sensitivity 와 signal-to-noise ratio가 매우 낮고 복잡한 알고리즘이 요구되어져 glucose 농도 측정에 한계가 있음이 드러났다. 본 연구에서는 polarization sensitive optical coherence tomography (PS-OCT)에 사용되는 polarization sensitive low coherence inter-ferometer (PS-LCI) 기법을 이용하여 비침습적으로 glucose의 농도 측정을 가능하게 하는 시스템 개발에 중점을 두었다. (중략)

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.556-565
• /
• 2003

Light losses in optical fibers are investigated by a fiber optic OTDR (Optical Time Domain Reflectometry) sensor system to develop fiber optic probes for structural displacement measurement. The displacement sensitivity was determined by the measurements of fiber-bending loss according to the gage length changes of the displacement sensor. The fiber optic displacement probe was manufactured to verify the feasibility of the structural displacement measurement.

• 한국광학회지
• /
• 제26권4호
• /
• pp.209-216
• /
• 2015

광부품 제작 및 조립 과정을 고려하여 완성된 광학계의 성능을 최적화하는 공차분석 방법을 제안하고 이를 적외선 광각 광학계에 적용하여 그 유용성을 확인하였다. 이 방법은 광학계에서 나오는 파면 오차를 쩨르니케 다항식으로 전개하고, 전개 계수인 쩨르니케 계수가 광부품 및 조립정렬 변수에 대해 변화하는 정도를 나타내는 민감도를 분석한다. 이 민감도를 바탕으로 광부품 제작 공차를 최적값으로 정하고 최선의 조립정렬 보상자를 고른다. 이 방법은 광부품의 제작 및 조립정렬 공차를 최적값으로 잡고, 또 그러한 공차에 의한 성능저하를 예측하고, 대비하므로 실제로 완성될 광학계의 성능을 최상으로 높일 수 있고, 또 정확하게 예측할 수 있다.

• 비파괴검사학회지
• /
• 제25권5호
• /
• pp.339-342
• /
• 2005

광섬유 센서 구성을 위한 장주기 광섬유 격자(Long-Period Fiber Grating, LPFG)는 코어 모드로 진행하는 빔이 위상 정합 조건(Phase Matching Condition)에 의해 특정 파장에서 클래딩 모드와 커플링이 일어나는 광소자이다. 공진 파장과 커플링의 세기는 온도, 스트레인, 주변 굴절 지수 등에 의해 민감하게 변화하는 특성을 이용하여 광섬유 센서에 넓게 응응될 수 있다 일반적으로 광섬유 격자는 광섬유 코어를 자외선에 노출시킴으로서 굴절률의 주기적인 변화가 유도되는 원리, 즉 광민감성 (Photosensitivity)에 기초를 두고 있으며 광민감성을 가진 격자제조용 광섬유 제작은 광섬유 격자 연구에 대단히 중요한 부분이다. 이 논문에서는 보론 첨가의 양에 의한 코어와 클래딩의 굴절률 차 변화와 그것에 따른 장주기 광섬유 격자의 온도 및 구부림 특성 변화를 분석하였다. 보론의 양이 증가할수록 코어와 클래딩의 굴절률 차가 줄어드는 것$(1.69{\times}10^{-4}/SCCM)$을 실험을 통해 알 수 있었고, 그로 인해 보론의 음의 온도 의존성으로 인해 장주기 광섬유 격자의 온도 의존성이 억제됨$(0.01145nm/^{\circ}C/SCCM)$을 확인할 수 있었다. 또한, 보론의 증가로 인해 코어와 클래딩의 굴절률차가 줄어들수록 장주기 광섬유 격자는 구부림에 더 민감함을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.265-267
• /
• 2001

In this paper, some optical parameters which have effects on the measuring precision and sensitivity of optical current sensor are analyzed. Each parameter occurs changes of specific characteristics of optical sensor system. The influences of performance and characteristics variation of optical current sensor are described in accordance with the changes of optical output power, optical bias point which is called phase difference, and a specific constant related to sensor material and wavelength of light source.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.93-99
• /
• 2011

This paper presents a new type of optical silicon accelerometer using deep reactive ion etching (DRIE) and micro-stereolithography technology. Optical silicon accelerometer is based on a mass suspended by four vertical beams. A vertical shutter at the end of the mass can only moves along the sensing axis in the optical path between two single-mode optical fibers. The shutter modulates intensity of light from a laser diode reaching a photo detector. With the DRIE technique for (100) silicon, it is possible to etch a vertical shutter and beam. This ensures low sensitivity to accelerations that are not along the sensing axis. The microstructure for sensor packaging and optical fiber fixing was fabricated using micro stereolithography technology. Designed sensors are two types and each resonant frequency is about 15 kHz and 5 kHz.

• 소음진동
• /
• 제6권4호
• /
• pp.475-479
• /
• 1996

Recently, fiber optic hydrophone is a subject which has attracted as a underwater acoustic sensor. In this paper, a length of optical fiber is bonded to an end-capped hollow cylinder of some elastic material, e. g. aluminum and glass-pyres. The normalized sensitivity is derived according to the direction of polarization. Derived sensitivity equations are simulated for two different mandrel materials. The results are also compared to the McMahon's results which calculated for an average Pockel coefficient. Based on the numerical simulation normalized sensitivity is propotional to the inner to outer diameter ratio.