• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.160-161
• /
• 2000

The 3rd order nonlinear properties show Optical bleaching (Saturation) and Reverse saturation in absorption aspect, whereas Self-focusing[3][4] and Self-defocusing in refraction aspect. Optical bleaching and Self-focusing phenomena of those properties in particular can be useful to make the optical beam spot size smaller for application on the higher optical storage density. (omitted)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.87-93
• /
• 2014

Optical brightening agents (OBA) is generally used to improve the optical property of printing paper in the paper industry. However, effects of OBA addition on paper preservability has been not fully understood yet. Therefore, this study was aimed to investigate effects of a OBA on the aging characteristics of paper. The OBA treatment of three different types was performed by dipping a filter paper into each a OBA solutions of different concentrations. The filter papers applied with a OBA were artificially aged at 80oC and 65% RH, and their optical and mechanical properties were evaluated. It was found that application of OBAs influenced the aging characteristics of paper. Especially, after aging, the optical and mechanical properties of the filter paper treated with the tetra-type OBA were more significantly decreased than those of the non-treated filter paper. The more the concentration of the tetra-type OBA increased, the more decreasing rate of optical and mechanical properties of the filter paper. While, in case of di-type OBA and hexa-type OBA, paper optical and mechanical properties were slightly decreased or not changed with a OBA treatment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.218-224
• /
• 1999

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using short wavelength laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates with high is regarded as the most suitable process to manufacture optical disk substrates with high dimensional accuracy low residual stresses and superb optical properties In the present study polycarbonate optical disk substrates were fabricated by injection compression molding and the birefringence regarded as one of the most important optical properties for optical disk is measured. The effects of various processing conditions upon the development of birefringence distribution were examined experimentally. It was found that the value of the birefringence distribution were very sensitive to the mold wall temperature history and the variance of the birefringence distribution in the radial direction was affected by the level of the packing and the compression pressure.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.102-105
• /
• 2012

The structural, electrical, and optical properties of layer-by-layer ZnO nanoparticles deposited using sol-gel spin coating technique were studied and now presented. Thicknesses of the thin films were varied by increasing the number of deposited layers. As part of our characterization process, XRD and FE-SEM were used to characterize the structural properties, current-voltage measurements for the electrical properties, and UV-Vis spectra and photoluminescence spectra for the optical properties of the ZnO thin films. ZnO thin films with thicknesses ranging from 14.2 nm to 62.7 nm were used in this work. Film with thickness of 42.7 nm gave the lowest resistivity among all, $1.39{\times}10^{-2}{\Omega}{\cdot}cm$. Photoluminescence spectra showed two peaks which were in the UV emission centered at 380 nm, and visible emission centered at 590 nm. Optical transmittance spectra of the samples indicated that all films were transparent (>88%) in the visible-NIR range. The optical band gap energy was estimated to be 3.21~3.26 eV, with band gap increased with the thin film thickness.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.54-57
• /
• 2000

Introducing left and right fractional orders separately, we show that the cascading of optical extended fractional Fourier transform systems can be easily calculated. Through such calculations we study the properties of extended fractional Fourier transforms.

• Journal of Integrative Natural Science
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2011

The properties of porous silicon, such as substrate properties, porosity, thickness, refractive index, surface area, and optical properties of porous silicon were reviewed. Some properties, such as porosity, refractive index, thickness, pore diameter, multi-structures, and optical properties, are strongly dependent on the anodization process parameters. These parameters include HF concentration, current density, anodization time, and silicon wafer type and resistivity.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.236-242
• /
• 2012

In general, such methods as interferometers or wavefront sensors are commonly used for testing of an optical system and optical components. In these cases, the surrounding environments are unlikely to affect the measurements. On the other hand, intraocular lenses of hydrophilic materials with special properties experience a certain difficulty in testing the optical properties. An intraocular lens is dried in the air, which causes deformation and changes the optical characteristics such as index of refraction and thickness. Thus, it is hard to measure the optical characteristics of an intraocular lens by using common methods. In this study, a special structure is used for measuring of the transmission wavefront aberration and effective focal length of an intraocular lens of hydrophilic materials by using a Shark-Hartmann sensor among the various measuring methods. As an application of this measuring method, this study shows a simple method to measure the index of refraction of unknown liquids with a plano-convex lens with a well known index of refraction. Also, this method is used to measure the optical properties of a plano-convex such as index of refraction and curvature by using a liquid with a well known index of refraction.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.103-111
• /
• 2000

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage density using short wavelength laser are being developed. The birefringence distribution is regarded as one of the most important optical properties for optical disk. In the present study, the birefringence distrubution is calculated using the Leonov model for viscoelastic constitutive equations and Cross/WLF model for viscosity approximation. The effects of processing conditions upon the development of birefringence discosity approximation. The effects of processing conditions upon the development of birefringence distribution in the optical disk were examined theoretically. It was found that the values of the birefringence distributions were very sensitive to the mold wall temperature history which minimizes the birefringence distribution. The analytical results showed the possibility of improving mechanical and optical properties in the optical disk substrates by active control of the mold wall temperature history.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.61-66
• /
• 2004

Bleached chemithermomechanical pulp (BCTMP) was produced from CTMP of Betula maximowicziana Regel by two staged ozone-hydrogen peroxide bleaching in order to improve the optical properties of high yield pulp. This pulp was used for the evaluation of optical properties improvement, chemical characteristics of lignin in fiber and the relationship between lignin and optical properties in fiber cell wall. Hydrogen peroxide treatment improved the brightness, but the post color number (PC No.). There was little improvement on optical properties by ozone treatment, but this could be improved more by using two staged ozone-hydrogen peroxide bleaching. The hydrogen peroxide treatment did not make any change on chemical characteristics of lignin in cell wall, but by ozone treatment, it was found that the non-aromatic conjugated structure was existed in the surface of cell wall, but this could be removed by hydrogen peroxide treatment in two staged ozone-hydrogen peroxide treatment. Therefore, the optical properties was significantly improved, due to the removal of non-aromatic conjugated structure.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.26-35
• /
• 1997

A study was carried out to investigate such optical properties of coated papers as brightness, opacity and gloss affected by the coating pigment composition and coat weight using clay, ground calcium carbonate, precipitated calcium carbonate, and plastic pigment as pigments. The effects of drying methods and supercalendering on optical properties were also evaluated. Gloss increased abruptly while brightness and opacity decreased slightly by supercalendering due to surface smoothing and consolidating effects of the coating layers. Optical properties changed little by drying methods. Pigment composition showed significant influences on optical properties. Brightness of coated papers decreased or increased linearly as the coat weight was increased depending on the pigment composition, while opacity increased linearly for all formulations. Gloss increased abruptly at low coat weights for all formulations and approached a plateau value at coat weight of 15-20g/$m^2$. Third order polynomial regression equations relating the coat weight with gloss have been derived and tabulated.