• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.9-15
• /
• 2008

An investigation was carried out to examine the pores of casting bodies depending on the position of wax pattern in the ring for precious alloy by optical micrographs. From the result of optical micrographs, many pores were found in the Group C that wax pattern is placed in the center of the ring. However, any pores were scarcely found in the Group A, B, D and E that wax patterns are placed out of the center of thermal zone. In comparison with the pores of casting bodies of Group C, many pores were found at the cusp area rather than at the proximal surface. From these examination, it was concluded that wax pattern should be placed out of the center of thermal zone to prevent casting boies from occurring pores.

• 한국광학회지
• /
• 제8권5호
• /
• pp.403-409
• /
• 1997

다양한 특징들을 광학적으로 병렬추출하여 패턴인식을 수행하는 시스템을 제안하고 실험하였다. 추출하려는 특징은 6개의 방향선소들 및 선소특징만으로 구별되지 않는 패턴들에 대한 공분산행렬의 고유벡터들이다. 이 시스템은 크게 특징추출부와 패턴인식부로 구성된다. 전자는 여러 특징을 병렬적으로 추출하기 위해 다중 Vander Lugt 필터를 사용하여 광학적으로 구현되었으며, 후자는 이들 추출된 특징들을 사용하여 패턴인식이 수행되도록 컴퓨터에서 구현되었다. 패턴인식 방법으로는, 추출된 특징을 인공신경망에 학습을 시키는 방법과 단순히 선소들의 논리적인 개수를 사용하는 방법, 두 가지가 각각 사용되었다. 여기서는 선소들로만 구성된 15개의 영문자 패턴들에 대해 실험하였고 그 실험결과를 보고한다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.156-164
• /
• 1998

Electronic Speckle Pattern Interferometry(ESPI) has been used to measure surface deformations of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive technique, is capable of providing full-field results with high spatial resolution and high speed. One of the important application using electronic speckle pattern interferometry is electronic speckle contouring of a diffused object for 3-D shape analysis and topography measurement. Generally the electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and the shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. We also describe formation process of depth contour fringes and grid contour fringes by shifting direction of the two illumination beams. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring, and then, the electronic speckle contouring experiment with various specimens. For quantitative analysis of the contour fringes, we used 4-frame phase shifting method with PZT Finally, good agreement between the geometric analysis and experimetal results is obtained.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1114-1124
• /
• 2005

The purpose of the paper is to find the elements of jacket pattern far the obese women who went to slenderize their shape by optical illusion. Representative four subjects participated in wear tests. Subjective evaluation of the visual appearance we collected and, at the same time, 3D clothing air volume was observed for the four types of experimental jackets. As results it was found that narrower shoulder width, back upper width, and front waist width resulted in slender look, however, back abdomen width and front shoulder length induced more slender appearance in waist area. The result of the distance between clothing and skin measured by 3D scanner clearly demonstrated the distribution of ease due to the elements of pattern, which is useful to find the pattern variables responsible for the slender appearance of the obese women.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.477-486
• /
• 2015

We propose a novel calibration method which can be applied to all kinds of panel-type multi-view displays. We analyze how the angular, the axial, and the lateral misalignment affects the 3D image quality in a panel-type multi-view display. We demonstrate the ray optics simulation with a 3-view slanted parallax barrier system using pentile display for the quantitative calculation. Based on the analysis, we propose a new alignment pattern for all kinds of panel-type multi-view displays. The proposed pattern is sensitive to all of the angular, the axial, and the lateral misalignments. The high spatial frequency images and on and off alignment in the proposed pattern help observers to calibrate the system easily. We theoretically show the generality of the proposed alignment pattern and verify the pattern with image simulations and experiments.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권1호
• /
• pp.67-75
• /
• 2019

Grating interferometry based imaging technology is a kind of radiation imaging system, which can acquire not only absorption image but also phase difference and dark field image using the Talbot pattern. However, because of the technological difficulties and high cost of fabricating the gratings that make up the system, much efforts are being made to look for ways to replace them. The is a preliminary study to see how the Talbot pattern transfer through various kinds of scintillators and if the optical grating can be a way to replace the conventional absorption gratings. The geometry of the interferometer, the scintillator model, and the scintillator thickness are the main inputs for our simulation. We have used the concept of modulation for quantitative analysis of the contrast ratio of the Talbot pattern. This research is expected to provide very useful information on the design of optical gratings, which is an alternative way to analyze the Talbot pattern, which we have filed a patent on.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.239-244
• /
• 1998

ESP(Electronic Speckle Pattern Interferometry) is an optical technique to measure deforamtion of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive measuring method, is capable of providing full-field results with high spatial resolution and high speed. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and a shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring. And by this geometric analysis, we performed the electronic speckle contouring experiment. We used 4-frame phase shifting method with PZT for quantitative analysis of contour fringes. Finally, we showed good agreements between the geometric analysis and experimental results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.56-61
• /
• 2000

We present a fast inspection method of machine vision for in-line quality assurance of liquid crystal displays(LCD) and plasma display panels(PDP). The method incorporates an optical spatial filter in the Fourier plane of the imaging optics to block the normal periodic pattern, extracting only defects real time without relying on intensive software image process. Special emphasis is on designing a collimated white light source to provide high degree of spatial coherence for effective real time Fourier transform. At the same time, a low level of temporal coherence is attained to improve defect detection capabilities by avoiding undesirable coherent noises. Experimental results show that the proposed inspection method offers a detection accuracy of 15% tolerance, which is sufficient for industrial applications.

• 한국통신학회논문지
• /
• 제22권2호
• /
• pp.392-400
• /
• 1997

In this paper we porposed WCHF-fSDF filter to obtain a roration and scale-invariant correlation output. WCHF-fSDF filter is synthesized by each single CHF exttracted from scale-changed and wavelet tranformed imagesfor a refereence image as tranining images. The wavelet transform is defined as the correlation of an input image with a wavelet function. Therefore two 4f optical correlation systems are needed for pattern recognition using wavelet transform. We here include the wavelet function for the input image in the process of the proposed filter design and substitute the two 4f optical correlation system with a single 4f optical correlation system. The Performances of the proposed filter are compared with conventional CHF-SDF, POCHF-SDF filters through the computer simulation. The results of computer simulation show that the proposed filter has the rotation and scale-invariant correlation output and it has better performances than thoseof the conventioanl filters.