• IEIE Transactions on Smart Processing and Computing
• /
• 제6권2호
• /
• pp.71-75
• /
• 2017

In this paper, a smart optical fingerprint sensor technology that is robust against faked fingerprints. A new lens and prism accurately detect fingerprint ridges and valleys that are needed to express a fingerprint's intrinsic characteristics well. The proposed technology includes light path configuration and an optical fingerprint sensor that can effectively identify faked fingerprint features. Results of simulation show the smart optical fingerprint sensor classifies the characteristics of faked fingerprints made from silicone, gelatin, paper, and rubber, and show that the proposed technology has superior detection performance with faked fingerprints, compared to the existing infrared discrimination method.

• Journal of Electrical Engineering and information Science
• /
• 제3권3호
• /
• pp.336-341
• /
• 1998

We describe the architecture of an optical cross-connect (OXC) which is modular in structure and is able to be upgraded to a virtual wavelength path by adding wavelength converters. The additional feature of the OXC is the all-optical nature. It can be implemented with commercial components including mechanical optical switches. As a result of the test on the experimental OXC, it has been shown that 2.5 Gb/s signal can be transmitted via the OXC through 100 km length o an ordinary single mode fiber with 3 dB penalty.

• 전자통신동향분석
• /
• 제35권5호
• /
• pp.57-68
• /
• 2020

This paper reviews the recent trends in optical access technologies and their future directions. As the number of hyper-connected, ultra-low-latency, and hyper-realistic services increases, the wireless path has become shorter and the optical access network has become deeply penetrated into the end user. The optical access network continues to evolve through endless innovation via high-speed, ultra-low-latency, and abstraction/virtualization technologies.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.162-165
• /
• 2012

Bow-tie modes were proposed in a grooved rectangular resonator and their lasing characteristics were investigated in semiconductor microcavities. The observed spacing between two adjacent lasing peaks from the grooved cavity was reduced compared to that of 4-bounce whispering gallery modes (WGMs) from the same-sized simple rectangular cavity due to increased round-trip path length of the bow-tie modes. The lasing spectra of bow-tie modes obtained from two adjacent corners showed highly correlated patterns while those of 4-bounce WGMs did not.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.500-502
• /
• 1999

This thesis deals with study and implementation of a cross-coupling controller which can enhance the path-tracking performance of optically guided AGV(Automated Guided Vehicle). The AGV in this thesis is differential drive type and has front-side and rear-side optical sensors, which can identify the guiding path. When AGV from the path due to the inevitable error and the deviation must be corrected. It has been shown that compensation only the first term can lead to undesirable oscillatory results and even instability but compensating only the second term leads to a steady state offset error. Cross-coupling control directly minimizes the error by coordinating the motion of the two drive wheels. The cross-coupling controller is analyzed to evaluate its performance. The cross-coupling controller enhances transient performance of the controller is demonstrated by simulation and is compared with that of individual loop controller.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.315-324
• /
• 2017

In recent years, multicast services such as high-definition television (HDTV), video conferencing, interactive distance learning, and distributed games have increased exponentially, and wavelength-division multiplexing (WDM) networks are considered to be a promising technology due to their support for multicast applications. Multicast survivability in WDM networks has been the focus of extensive attention since a single-link failure in an optical network may result in a massive loss of data. But the improvement of network survivability increases energy consumption due to more resource allocation for protection. In this paper, an energy-efficient multicast algorithm (EEMA) is proposed to reduce energy consumption in WDM networks. Two cost functions are defined based on the link state to determine both working and protection paths for a multicast request in WDM networks. To increase the number of sleeping links, the link cost function of the working path aims to integrate new working path into the links with more working paths. Sleeping links indicate the links in sleep mode, which do not have any working path. To increase bandwidth utilization by sharing spare capacity, the cost function of the protection path is defined to use sleeping fibers for establishing new protection paths. Finally, the performance of the proposed algorithm is evaluated in terms of energy consumption, and also the blocking probability is evaluated under various traffic environments through OPNET. Simulation results show that our algorithm reduces energy consumption while maintaining the quality of service.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.788-793
• /
• 2015

This paper proposes a path planning algorithm to reduce the inspection time of AOI (Automatic Optical Inspection) machines for SMT (Surface Mount Technology) in-line system. Since the field-of-view of the camera attached at the machine is much less than the entire inspection region of board, the inspection region should be clustered to many groups. The image acquisition time depends on the number of groups, and camera moving time depends on the sequence of visiting the groups. The acquired image is processed while the camera moves to the next position, but it may be delayed if the group includes many components to be inspected. The inspection delay has influence on the overall job time of the machine. In this paper, we newly considers the inspection delay time for path planning of the inspection machine. The unified approach using genetic algorithm is applied to generates the groups and visiting sequence simultaneously. The chromosome, crossover operator, and mutation operator is proposed to develop the genetic algorithm. The experimental results are presented to verify the usefulness of the proposed method.

• 한국정보처리학회논문지
• /
• 제7권10호
• /
• pp.3164-3170
• /
• 2000

게임지도상에서 에이젼트 이동을 위한 경로탐색에 A+를 이용하는 경우에 실시간 게임진행에 지장을 주고 있다. 다른 경험적 탐색방법은 경로에 대한 최적성 보장이 없어서 문제가 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 현 위치, 목표위치, 최적경로위치로 정의되는 행으로 구성되는 경로표를 제안하였다. 이 경로표를 게임개발시에 미리 작성하여 게임진행시에 이를 이용한다. 이 경로표는 목표위치로의 이동을 위한 최적의 경유위치를 가지고 있어서 최적의 경로도 보장이 되며 탐색으로 인한 시간의 부하도 없다는 장점을 가지고 있다. 그러나 경로표 저장에 메모리가 많이 소요되는 단점이 있다. 이 논문에서는 이 같은 단점을 해소하기 위해 경로표는 생략하는 방법을 이용해도 데이터압축효과를 얻을 수 있음을 보여주었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.710-715
• /
• 1990

This paper presents a path control method for mobile robot using neural network and a systematic method for the kinematic and dynamic modelling of a mobile robot. The robot finds its path deviation by taking the signals of an optical array sensor and determined its moving behaviors using neural net control method. A robot can be taught behaviors by changing the given patterns, in this work, Back Propagation rule is used as a learning method.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.354-355
• /
• 2001

DOAS (Differential Optical Absorption Spectroscopy) System은 대기 중에 존재하는 기준물질들이 특정 파장영역에서 빛을 흡수하는 원리를 이용하고 있다. 현재 독일을 중심으로 한 유럽과 선진국에서는 대기 환경 기준물질의 모니터링 기술들이 주로 광 투과방식을 이용한 Open path의 모니터링 기술들을 개발하고 있다. 기존의 측정 방법과 Open Path 모니터링의 기법을 비교 할 때 Open path 시스템은 실시간 측정 및 분석이 가능하므로 기존의 화학적 측정방법에서 제기되어져왔던 화학 반응시의 방해 물질의 간섭제거 및 시간 분해도 향상등에 큰 장점이 있다. (중략)