• 소성∙가공
• /
• 제13권3호
• /
• pp.211-215
• /
• 2004

Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. The alignment system of micro optical module is a key apparatus for the miniaturization of optical module and the development of optical communication parts with high functionality. In this research, we have developed a system capable of automatic alignment of a $30\mu\textrm{m}$-thick film filter and a lensed fiber in order to improve the speed and losses in the optical fiber-to-filter alignment of optical modules. Using the developed automatic alignment system and silicon optical bench, we have measured optical loss and characteristics of the assembled optical add/drop module before packaging $1{\times}1$ OADM optical module. Whole size of add/drop module was less than $5mm{\times}5mm{\times}1mm$. The measured maximum insertion loss was 0.294㏈ that is below 0.3㏈ which is a standard loss of optical module.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.198-202
• /
• 2003

Tunable laser diode module with 50GHz-spacing internal wavelength locker was developed. Angle tilting dependency on FSR and peak wavelength shift and the proper initial tilting angle was calculated. By tilting the etalon, the response of the internal wavelength locker module was tuned. As a result, the fabricated internal wavelength locker module showed good performance over 62 channels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.193-197
• /
• 2003

As one of the core technologies in the field of the optical communication with WDM, the optical cross connector with movements of micro mirrors is getting important day by day. The packaging structure of 2-dimensional NxN MOEMS switch should be determined by the harmonization of the following items such as the geometrical compatability between optical and structural components, the characteristics of optical input and output parts with device, and the electrical performance for the operation of micro mirrors. Therefore, the packaging process could be defined as the integrated technology completed by the optical and electrical science and the material science for the understanding of its thermo-mechanical properties with packaging materials. In the present study, the harmonization between the optical and structural components as well as the optical characteristics of lens system used will be investigated.

• Journal of the Optical Society of Korea
• /
• 제7권1호
• /
• pp.28-33
• /
• 2003

We describe the optimal design and the fabrication of a 2$\times$2 port optical device based on the thin film filter (TFF), and also propose a 4-channel OADM module using these devices. The optical performance of the proposed OADM module is evaluated theoretically and experimentally, and is compared to that of typical OADM modules using 1$\times$2 port optical devices for 4, 8, 16 and 32 drop channels in optical transmission systems. Since the 2$\times$2 port optical device accomplishes the function of wavelength multiplexing and demultiplexing simultaneously in the proposed OADM module, the insertion loss of through channels can be improved by 1.2 dB compare to that of typical OADM modules using 1$\times$2 port optical devices. In addition, both the size and the price of the module can be reduced to 40~50%.

• 한국CDE학회논문집
• /
• 제9권3호
• /
• pp.220-225
• /
• 2004

This paper presents a program for the automatic alignment of optical axes and evaluation of the optical filter performance which is a key technologies for the production of optical module. Recently the production of optical filter module mostly depends upon handwork or semi-automation. Moreover, they have used an expensive spectrum analyzer. In this work, we have developed an automatic alignment and evaluation program of optical filter module using photo detector and developed program for automation and cost reduction of the production of optical titter module.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.57-63
• /
• 2010

Tolerance analysis is one of the most important processes to improve the image quality of products. High resolution camera module for mobile phones needs precision assembly technology since the module becomes smaller and thinner. This paper will focus on the unit tolerance and the assembly tolerance which can affect the performance of the module. Lens shading and relative illumination were used to evaluate the optical axis scatter for each component on camera and estimate the assembly yield rate based on the evaluation result. A program was developed to analyze the impact on optical axis by each module, then to optimize the dimensions and tolerance for reducing the scatter of optical axis assembly. Through the simulation, though a rate of relative illumination was declined in where optical axis is displaced $100{\mu}m$ from sensor center, MTF performance is not influenced by increasing in optical axis displacement. It was seen that assembly yield was improved in result of simulation after correcting optical axis tolerance.

• 한국광학회지
• /
• 제16권4호
• /
• pp.345-353
• /
• 2005

포토 다이오드(photodiode) 조정 방식을 이용해서, 비전 시스템을 장착한 고가의 정밀 자동 조립조정 장비 없이 홀로그램 픽업 모듈을 제작하는 새로운 방법을 제안하였다. 저가격화를 위해서 리드 프레임형의 반도체 레이저와 COB(Chip on Board)형의 포토 다이오드를 사용했고, 초점 에러 신호(focus error, FES) 검출방법은 스팟 사이즈 검출법(spot size detection, SSD), 트랙 에러 신호(tracking error, TES) 검출방법은 삼빔법(3 beam method)을 이용했다. 이를 만족하는 픽업 홀로그램 모듈 광학계를 설계하고, 조립조정 프로세스 수립 및 시스템을 제작하였으며, 조립된 홀로그램 모듈을 이용하여 CD에서 데이터를 검출하는 실험을 통해 제안된 포토 다이오드 조정방식의 유용함을 입증하였다.

• 한국광학회지
• /
• 제14권6호
• /
• pp.578-582
• /
• 2003

광섬유 브라그 격자와 광 분기 결합기로 구성된 새로운 구조의 파장 선택이 가능한 저가형 광신호 삽입/추출 모듈을 제안하였다. 제안된 저가형 광신호 삽입/추출 모듈은 동일한 동작을 수행하는 기존의 모듈에 비해 매우 단순한 구조를 가지고 있으며 경제적으로 구현이 가능하다는 장점을 갖고 있다. 제안한 모듈의 동작 특성을 실험적으로 측정 및 분석한 결과, 155 Mbps급의 전송속도를 갖는 WDM 전송 시스템 내에서 no-crosstalk power penalty를 가짐을 확인하였다. 출력 단에서 투과되는 채널의 삽입 손실은 3.5 ㏈ 이하이었고 추출 단으로 추출되는 신호의 삽입 손실은 21㏈ 이하로 비교적 높은 값을 가졌다. 반면에 추출된 신호의 추출 채널 고립비는 25 ㏈ 이상이었고 투과되는 신호의 투과 채널 고립비는 35 ㏈ 이상으로 상용화된 모듈과 비교해 거의 비슷한 수준의 값을 가짐을 확인하였다.

• 한국광학회지
• /
• 제5권3호
• /
• pp.423-430
• /
• 1994

DFB-LD 칩으로부터 단일보드 광섬유 부착 2.5Gbps 광통신용 광원인 DFB-LD 모듈을 설계, 제작하였다. DFB-LD 모듈은 광 isolator가 삽입된 2 렌즈 quasi confocal 광학계로 구성된 원통형 서브 모듈과 14 pin butterfly 패키지가 분리된 구성으로서 이들 사이의 전기적 연결은 bias-T 회로가 형성된 하이브리드 기판으로 이루어지도록 설계하였다. 모듈 제작시 정밀한 부품 고정이 요구되는 서브 모듈 조립에는 레이저웰딩 방법을 사용하였다. 제작된 DFB-LD 모듈은 광결합 효율 20%, -3dB 소신호 변조 대역폭 2.6GHz 이상의 특성을 가졌으며 온도 순환검사에도 10% 이내의 광출력 변동만을 보임으로써 기계적 신뢰성을 확인할 수 있었다. 제작된 DFB-LD 모듈의 광송신 성능을 실제 2.5Gbps 광통신 시스템의 광원으로 적용하여 평가한 결과 47km의 광섬유 전송시 BER $1\times10^{-10}$ 조건에서 최대 -30.2dBm의 수신감도를 얻었으며 이 때 전송페널티는 소광비에 의한 것이 1.5dB, 분산에 의한 것이 1.0dB로 나타났다.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.150-156
• /
• 2017

A diffraction limited optical system for head mounted displays (HMDs) was designed. This optical system consists of four modules, including 1:5 mm and 5:30 mm beam expanders, polarization grating-polarization conversion system (PG-PCS) and refractive/diffractive projection optical module. The PG-PCS module transforms the unpolarized Gaussian beam to a linearly polarized beam and it simultaneously homogenizes the spatial intensity profile. The optical projector module has a $30^{\circ}$ field of view, a 22 mm eye relief, and a 10 mm exit pupil diameter with a compact structure. Common acrylic materials were utilized in the optical design process; therefore, the final optical system was lightweight. The whole optical system is suitable for a 0.7 inch liquid crystal on silicon microdisplay (LCOS) with HDTV resolution ($1920{\times}1080$) and $8.0{\mu}m$ pixel pitch.