• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.208-216
• /
• 2017

PURPOSE. The aim of this study was to compare the precision of optical impression (Trios, 3Shape) versus that of conventional impression (Imprint IV, 3M-ESPE) with three different margins (shoulder, chamfer, and knife-edge) on Frasaco teeth. MATERIALS AND METHODS. The sample comprised of 60 zirconia half-crowns, divided into six groups according to the type of impression and margin. Scanning electron microscopy enabled us to analyze the gap between the zirconia crowns and the Frasaco teeth, using ImageJ software, based on eight reproducible and standardized measuring points. RESULTS. No statistically significant difference was found between conventional impressions and optical impressions, except for two of the eight points. A statistically significant difference was observed between the three margin types; the chamfer and knife-edge finishing lines appeared to offer better adaptation results than the shoulder margin. CONCLUSION. Zirconia crowns created from optical impression and those created from conventional impression present similar adaptation. While offering identical results, the former have many advantages. In view of our findings, we believe the chamfer margin should be favored.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.423-425
• /
• 1998

An optical system which can autonomously form and display an impression of a picture made up by many figures has been developed. This system consists of optical fuzzy-neurons which calculate the correlation between the input picture and the reference image by incoherent optics. The calculated signal is applied to an amplifier whereby the output signal increases, then decreases according to increase of the input signal . These outputs are synthesized, and are used for changing the position where the system gaze on a part of the input picture by light beam. In this system, the light intensity used for gazing changes chaotically, The attractor drawn from the change of light intensity corresponds to the impression of the picture. This paper shows the results that are calculated by the numerical simulation. The system has been simulated to express the impression for a picture formed by 4figures.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.28-39
• /
• 2005

This chapter presents how 'optical illusion' works in applying makeup and how to differentiate the direction, location and shape at eyebrow lines in the aspect at physiognomy. For this study, employed were five types of face shape produced by Photoshop program - round, square, long, inverted triangle. and diamond. The best-matched facial shape was examined through a questionnaire research after applying the optical illusion of eyebrow lines to the five types of face shape. The results were revealed to be identical to ones presented in make-up teaching materials. In conclusion, it was found that well-matched shape and size of eyebrow could make some changes in the facial impression, changing the face shape into oval shape. The facial line can be modified and supplemented by reshaping such facial parts as the eyebrow, producing well-balanced facial shape. Consequently, make-up was proved to be one of the methods which can be used to create social and psychological effect which can make a favorable facial impression and individuality, natural impression and image making depending on different purposes, taking advantage of optical illusion effect.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.164-172
• /
• 2008

A face is the place where individuals can first give their images visually. This chapter presents how 'Visual optical illusion' works in applying makeup and how to differentiate the direction, location and shape of Lip in the aspect of physiognomy. For this study, employed were five types of face shape produced by Photoshop program. The best-matched facial shape was examined through a questionnaire research after applying the optical illusion of Lip to the five types of face shape. The results were revealed to be identical to ones presented in make-up teaching materials. In conclusion, it was found that well-matched shape and size of Lip could make some changes in the facial impression, changing the face shape into oval shape. The facial line can be modified and supplemented by reshaping such facial parts as the Lip, producing well-balanced facial shape. Consequently, make-up was proved to be one of the methods which can be used to create social and psychological effect which can make a favorable facial impression and individuality, natural impression and image making depending on different purposes, taking advantage of optical illusion effect.

• The Journal of Advanced Prosthodontics
• /
• 제14권4호
• /
• pp.236-249
• /
• 2022

PURPOSE. The present study compared the accuracy between digital and conventional implant impressions. MATERIALS AND METHODS. The experimental models were divided into six groups depending on the implant location and the scanning span. Digital impressions were captured using the intraoral optical scanner TRIOS (3Shape, Copenhagen, Denmark). Conventional impressions were taken with the monophase impression material based on addition-cured silicones, Honigum-Mono (DMG, Hamburg, Germany). A high-precision laboratory scanner D900 (3Shape, Copenhagen, Denmark) was used to obtain digital data of resin models and stone casts. Surface tessellation language (STL) datasets from scanner were imported into the analysis software Geomagic Qualify 14 (3D Systems, Rock Hill, SC, USA), and scan body deviations were determined through two-dimensional and three-dimensional analyses. Each scan body was measured five times. The Sidak t test was used to analyze the experimental data. RESULTS. Implant position and scanning distance affected the impression accuracy. For a unilateral arch implant and the mandible models with two implants, no significant difference was observed in the accuracy between the digital and conventional implant impressions on scan bodies; however, the corresponding differences for trans-arch implants and mandible with six implants were extremely significant (P<.001). CONCLUSION. For short-span scanning, the accuracy of digital and conventional implant impressions did not differ significantly. For long-span scanning, the precision of digital impressions was significantly inferior to that of the traditional impressions.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.179-187
• /
• 2017

The fourth industrial revolution is a phenomenon where productivity is improved in each field by the convergence of IT technology and existing industries. In the dental treatment process, prosthetic treatment time is drastically shortened through AI and expert software. Oral imaging, prosthesis design, and prosthesis manufacturing are performed continuously, so the treatment can be completed in a few hours. In this paper, we introduce the research trend of multimedia technology in the prosthetic process. We also propose a new method for accelerating the fusion of surface data during the optical impression. Proposed method enables high-speed optical impression and accelerates the overall automated production process of dental prosthesis.

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.79-87
• /
• 2021

구강 스캐너를 이용한 디지털 인상과 CAD-CAM (Computer-aided design-computeraided manufacturing) 기술은 점차 발전하고 있다. 전통적인 인상 채득, 작업모형의 제작, 왁스 납형 제작 및 주조의 복잡한 과정이 단축되었으며 환자의 방문 횟수도 줄일 수 있게 되었다. 구강 스캐너 기술의 발전으로 디지털 인상의 정밀도와 정확성이 향상되었으며, 그 적응증은 보다 광범위한 부위의 고정성 치과보철물의 수복으로 점차 확대되어지고 있다. 본 증례 보고에서는 광범위한 부위의 고정성 임플란트 보철물의 수복을 위하여, 컴퓨터로 계획하고 가이드 수술용 템플레이트로 완전히 가이드된 수술을 하고, 즉시/조기 임플란트 보철물을 장착하였으며, 임시 보철물에서 최종 보철물로 전환하는 과정에서 구강스캐너의 지대주중첩 알고리즘을 활용하였다. 임플란트 수술 당일 획득한 구강스캔으로 맞춤형 지대주를 포함한 임시 보철물을 제작하여 활용하였으며, 최종 보철물은 임시 보철물에서의 맞춤형 지대주를 낀 채로 구강스캔하여 제작되었다. 이 과정에서 임시 보철물 장착 전에 미리 스캔해서 라이브러리화한 맞춤형 지대주 데이터를 구강스캐너 소프트웨어 '지대주 자동중첩 기능'으로 최종 디지털 인상에 자동적으로 매칭하였고, 치은연하마진인 부분도 지대주를 탈거하지 않고, 치은압배사 없이 정밀하게 획득할 수 있었다. 구강스캐너와 소프트웨어의 다양한 기술을 응용하여 임플란트 치료 과정을 디지털 워크플로우로 변화시킴으로써, 환자 불편감 및 치료 시간을 단축하였으며, 환자와 술자에게 모두 이롭고 예지성 있는 치료가 가능하였다.

• 대한치과보철학회지
• /
• 제53권4호
• /
• pp.330-336
• /
• 2015

목적: 본 연구의 목적은 치간 유두의 소실로 인해 치아 사이에 언더컷이 존재하는 경우 이것이 인상체의 정확도에 영향을 미치는지 알아보고자 하는 것이다. 재료 및 방법: 2종류의 부가중합형 실리콘 인상재($Extrude^{(R)}$ Wash, $Imprint^{TM}$ II Quick Step Light Body)와 한 종류의 알지네이트 인상재(Cavex Impressional)로 상악 주모형의 인상을 채득하여 얻은 실험모형상의 두 점 사이의 거리를 측정하여 주모형과 비교하여 모형의 변형 정도를 측정하였다. 세 종류의 인상재에서 얻은 실험 모형들을 치간 유두가 존재하는 군과 존재하지 않는 군으로 나눠 총 6개의 군을 평가하였으며, 각 군당 6개의 모형을 측정하였다. 삼차원 광학 스캐너로 실험모형을 스캔한 후, 하나의 모형당 6개의 두 점 사이의 거리를 삼차원 디지털 계측 소프트웨어 상에서 측정하였다. 측정 거리의 변화 정도를 백분율로 계산하여 모형의 변형률을 구하였으며, 이것을 이원분산분석을 이용하여 유의수준 .05에서 분석하였다. 결과: 측정거리 6개 중 3개에서 인상재에 따라 통계적으로 유의한 차이를 보였다. 반면, 치간 유두의 존재 여부에 따른 차이는 알지네이트 인상재에서 하나의 측정 거리에서만 유의한 차이를 보였을 뿐(P=.047), 다른 측정거리들과 인상재에서는 통계적으로 유의성 있는 차이를 나타내지 않았다. 결론: 치간 유두의 소실로 인한 언더컷의 존재가 부가중합형 실리콘 인상재와 알지네이트 인상재의 체적 정확도에 미치는 영향은 크지 않았다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.453-465
• /
• 2005

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and methods: The metal stock, individual, and adjustable stock trays were used for 60 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a vinyl polysiloxane impressions and allowed to set for one hour. The master model and the duplicated casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software(CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results : There were no significant differences between the accuracies of the adjustable stock tray and the master model except only anterior arch width on the upper arch and the diagonal arch length and arch length on one side of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study cast produced by them.

• 복식
• /
• 제53권5호
• /
• pp.33-48
• /
• 2003

The purpose of this study was to define the moaning and features of humor in modern fashion. by examining how it's being grafted into fashion, based on artistic expression including collage, assemblage, photo montage, graffiti, transformation, distortion, exaggeration and optical illusion. Beside. humor of fashion is to examine not only laugh and fun but also formative expression and creativity. Furthermore, it is to enlarge the range of conception for future fashion. The findings of this study could be described as below: The features of humorous fashion by collage and assemblage boiled down to unexpectedness, disharmony and creativity. The photo montage was marked by popularity, reproduction and recreativity, and graffiti was characterized by attention, simpleness, and amusement. And there were unexpectedness, creativity and strangeness in transformation, distortion, magnification and optical illusion. The meaning of humorous fashion that carries such features could eventually be summarized into the followings : First, the fashion, from which collage, assemblage, photo montage. graffiti, transformation, distortion, magnification and optical illusion were detected. could be sorted out into several categories that used different things : introduction of objects of different nature, dramatic impression and wit based on photo montage technique, introduction of comic components and infant image, and destruction of aesthetic principles. Second, the substance of humor in art could be applied to fashion design as well as visual art. Humor is a property related to accidental, unexpected incident, behavior, situation or idea, and it puts laugh, disharmony or awkwardness in fashion. Third, spicing fashion with humor could serve to draw people's attention, break down the barrier among people exposed to dry sentiment, and connect the public with art.