• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.51-63
• /
• 1995

In this paper, a new real-time optical image switching system based on the phase-typed BPEJTC is suggested. The phase filter mask which has the arbitrary position mapping function between input and output planes is constructed by using the modified JTPS of the BPEJTC. Then, the input image is convolved with this phase filter mask in the spatial frequency domain and through further Fourier transform the input image is switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switched to the new positions in the output correlation plane where the correlation peaks are occurred. And, based on the computer simulation results, the practical optical switching system is opto-digitally constructed and through some experiments on image switching the possiblity of real-time implementation of the multiple optical image switching system by using the BPEJTC is suggeste.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.288-291
• /
• 2012

We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz, and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.17-24
• /
• 2015

In this paper, we investigated the output polarization of a Lyot-type optical fiber comb filter based on a polarization-diversity loop structure. It was found that the output state of polarization (SOP) of the filter made a wavelength-dependent evolution, and the spectral periods of the output SOP variation in flat-top and lossy flat-top band modes were the channel separation of the filter and its half, respectively. For a certain input SOP, the filter could pass or reject specific spectral sections by adding and controlling an output analyzer. In particular, it was theoretically anticipated that the filter with the output polarizer could provide the fine continuous tuning of its pass band center in a wavelength range corresponding to the ${\pm}9.5%$ of channel spacing(0.8nm) when the input SOP was properly adjusted. It is expected that this tuning function can be effectively applied to suppress unwanted spectral portions in modulated optical signals.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.63-67
• /
• 2013

We perform an optical vestigial sideband (VSB) filtering using a pair of Fabry-Perot (FP) filters. The transmittance curve of each FP filter is made to have sharp skirts using an offset between input and output coupling fibers. Moreover, the accurate periodicity of FP filters in the optical frequency domain enables the simultaneous VSB filtering of a large number of optical channels. With this VSB filtering technique, we transmit 12.5-GHz spaced $64{\times}12.4-Gb/s$ wavelength-division-multiplexing channels over a single-mode fiber up to 150 km without any dispersion compensations. When the channel spacing is reduced to 10 GHz, we achieve the spectral efficiency of 1 bit/s/Hz in conventional optical intensity modulation systems up to 125 km.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.296-299
• /
• 2004

KARI precision attitude determination system has been developed for high accurate geo-coding of KOMPSAT-2 image. Sensor data from two star trackers and a IRU are used as measurement and dynamic data. Sensor data from star tracker are composed of QUEST and unit vector filter. Filter algorithms consists of extended Kalman filter, unscented Kalman filter, and least square batch filter. The type of sensor data and filter algorithm can be chosen by user options. Estimated parameters are Euler angle from 12000 frame to optical bench frame, gyro drift rate bias, gyro scale factor, misalignment angle of star tracker coordinate frame with respect to optical bench frame, and misalignment angle of gyro coordinate frame with respect to optical bench frame. In particular, ground control point data can be applied for estimating misalignment angle of star tracker coordinate frame. Through the simulation, KPADS is able to satisfy the KOMPSAT-2 mission requirement in which geo-location accuracy of image is 80 m (CE90) without ground control point.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.217-222
• /
• 2021

EOTS(Electro-Optical Tracking System) is utilized in acquiring visual information to assess a guided missile's performance. As the missile travels so fast, it is almost impossible for operator to re-capture the lost target. The RADAR or telemetry data are used to re-capture the lost target however facilities to receive real time data is required, which constrains selection of tracking site. Unlike aforementioned data, pre-calculated nominal trajectory can be used without communication facility. This paper proposes a method to predict lost target's state by employing nominal trajectory. Firstly, observed trajectory and nominal trajectory are compared using DTW and current target's state is predicted. The predicted state is used as observation in Kalman filter's correction phase to predict target's next state. The plausibility of the proposed method is verified by applying on actual missile trajectory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.46-55
• /
• 2002

The key component to accomplish the WDM all optical network is an Arrayed Waveguide Grating(AWG) wavelength filter Numerical analysis is necessary for design and analysis of optical components like AWG wavelength filter. Beam Propagation Method(BPM) is the most widely-used method. In this paper, we analyze the difference between the paraxial BPM and the WA-BPM when they are applied to the analysis of InP/InGaAsP/InP AWG wavelength filter. The paraxial BPM is based on paraxial approximation, and the WA-BPM is based on the low order Pade approximant. The side lobe level(SLL) and insertion loss calculated from both methods are compared. The high order Pade approximant will to used to more accurate design and analysis of AWG.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.701-711
• /
• 1994

In this paper, we design wavelet matched filters using Wavelet Transform available in the field of time-frequency analysis, for the optical patter recognition, and study optical correlation properites according to variations of the dilation factor of wavelet functions, which were compared with conventional matched filter and POF. We have found that the wavelet matched filters depend upon the shapes if used input patterns and dilation factors of the wavelet function in order to have the best dicriminability. Also, we show the edge enhanced effects of 2-D image, which is one of the properities of the wavelet transform. If has been found that the wavelet matched filter can discriminate better than the conventional matched filter and POF owing to their bandpass properties, and found that the proposed wavelet matched filters have more sensitive correlation response than POF.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.68-72
• /
• 1997

Using one of the absorption lines of $^{13}C_2H_2$ molecules near the zero dispersion wavelength(1549.49nm) of dispersion shifted fiber, we stabilized center frequency of an optical fiber Fabry-Perot filter. The free spectral range of the filter is 100 GHz for 100 GHz channel allocation. For equi-spaced three channel multiplexing, channel locking of three DFB-LDs to transmission peaks of the fiber Fabry-Perot filter was tried. To investigate the effect of dithering current applied to each DFB-LD, the change of DFB-LD linewidth was measured.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.146-149
• /
• 2003

Nanosecond pulses are efficiently amplified by a two-stage EDFA. The EDFA employs an optical bandpass filter between stages to remove the amplified spontaneous emission of the first EDFA that strongly saturates the gain of the second EDFA. The peak power of the amplified output pulse is 83 W when that of the input pulse of 10 ㎱width and 100 $mutextrm{s}$ period is 1 ㎽.