• 제목/요약/키워드: Optical film

검색결과 3,009건 처리시간 0.024초

소형위성용 태양전지 개발 동향 및 발전 방향 (Development trends of Solar cell technologies for Small satellite)

  • 최준희
    • 한국산학기술학회논문지
    • /
    • 제22권5호
    • /
    • pp.310-316
    • /
    • 2021
  • 기존의 인공위성은 다기능·높은 성능을 가진 대형위성을 국가 단위에서 운용하는 것이 일반적이었으나 최근의 전기·전자 및 광학 기술의 경량 소형화 발전에 따라 점차 소형위성이 주목받고 있다. 크기와 무게가 감소됨에 따라 적은 비용으로 개발 및 발사가 가능하여 위성 개발에 진입장벽이 낮아지고 있으나, 인공위성의 전력공급에 필수적인 태양전지 패널의 경우 태양광에 효율적으로 노출되기 위해 넓은 표면적이 필요하여 소형화 및 경량화가 제한적이다. 우주용 태양전지는 우주선과 태양열, 온도와 같은 다양한 우주환경을 고려하여 제작되어야하고, 부피를 최적화하기 위해 전개 매커니즘을 적용하며 경량화 및 고효율화를 위하여 태양전지 셀의 구조적 재료적인 연구개발이 필요하다. 현재 태양전지 패널로 개발되어 운용되고 있는 제품들은 고효율화를 위하여 주로 InGaP/GaAs/Ge 소재의 3중구조를 적용하고 있다. 최근에는 초고효율 다층구조 태양전지를 위하여 4중접합 이상의 구조가 연구되고 있으며, 나아가 소재적으로 경량화에 유리한 유연박막 태양전지, 유기 및 유무기 하이브리드 태양전지 등이 차세대 소형위성용 태양전지로 주목받고 있다.

무반사 면을 갖는 DFB 레이저의 빔 분포 시뮬레이션과 검정 (Simulation and Examination for Beam Profile of DFB Laser with an Anti-reflection Coated Mirror)

  • 권기영;기장근
    • 한국소프트웨어감정평가학회 논문지
    • /
    • 제16권1호
    • /
    • pp.55-63
    • /
    • 2020
  • 광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 오른쪽 거울 면에 반사가 일어나지 않도록 유전막 코팅을 하여 ρr=0 이 되도록 하였다. 문턱에서 최소 이득을 필요로 하는 제 1모드에 대하여, 종 방향으로의 발진 모드의 빔 분포와 방사전력비 Pl/Pr를 ρl의 위상=π인 경우와 ρl의 위상=π/2인 경우에 대하여 비교 검증했다. ρl의 위상=π인 경우, 낮은 문턱 전류와 높은 주파수 안정성을 얻기 위해서는, κL이 8보다 커야 한다. ρl의 위상=π/2인 경우, 낮은 문턱 전류를 위해서는 κL=1.0이 되도록 해야 하고, 이때 발진 주파수는 격자 주파수와 일치한다. 반사 방지 코팅을 하지 않은, 두 개의 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저보다, 한쪽 거울 면에 무반사 코팅을 한 경우에 모드 선별성이 훨씬 크다.

차량 적재함의 높이 변화 감지를 이용한 고속도로 톨게이트 과적차량 검출에 관한 연구 (A Study on Detection of Overloaded Vehicles at Highway Toll Gates Using Detection of Height Changes in Vehicle Cargo Boxes)

  • 이광;김봉근
    • 실천공학교육논문지
    • /
    • 제16권3_spc호
    • /
    • pp.391-399
    • /
    • 2024
  • 우리나라의 모든 고속도로 톨게이트에서는 저속 축중기를 사용해 과적 화물 차량의 고속도로 본선 진입을 차단하고 있으나, 일부 화물 차량은 가변축을 조작할 수 있도록 불법으로 개조하고 축조작을 통해 단속을 회피하고 있다. 기존에 수행된 연구들에서는 주행중인 차량의 타이어들을 검출해 축조작의 여부를 판별하고 있지만, 고속도로 톨게이트 검문소의 차량 진입부가 매우 좁기 때문에 하나의 영상 프레임에 차량의 모든 타이어를 촬영하는 것이 현실적으로 어렵다는 문제가 있다. 이러한 문제를 해결하기 위해 본 논문에서는 타이어의 검출이 아닌 화물 차량 적재함의 상하 높이 변화를 감지하는 방법으로 축조작 시도 여부를 판단할 수 있는 시스템을 제안하였다. 화물 차량의 적재함 높이 변화를 검출하는 방법으로 허프 변환을 이용해 차량 적재함의 대표선을 추출하고 대표선의 높이 변화를 측정하여 적재함의 수직 높이 변화를 감지하는 방법과 광류를 이용해 영상의 일정 영역 내의 픽셀들에 대한 모션 백터를 구하고 이를 누적하여 적재함의 수직 높이 변화를 감지하는 방법을 사용하였으며 두 방법을 비교 분석하고 장단점을 제시하였다.

쐐기필터 사용에 따른 선량증가 영역에서 선량평가 (Dose Evaluation at The Build Up Region Using by Wedge Filter)

  • 김연래;문성공;서태석;정진범;김진영;이정우
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제37권4호
    • /
    • pp.341-348
    • /
    • 2014
  • 쐐기필터는 고선량 부분의 선량분포를 균등하게하기 위해서 사용된다. 금속쐐기필터와 기능강화 동적쐐기필터가 광자선과 상호 작용으로 표면과 선량강화영역 조사면내, 외에 선량변화를 평가하였다. 본 논문에서는 2차원적 조직등가물질로 공간 선량분포가 우수하고, 흡수선량에 따라 현상 없이 실시간으로 광학농도가 변하는 가프크로믹 EBT3 필름을 사용하여 선량평가를 실시하였다. 선형가속기 광자선 에너지는 6 MV, SSD 100 cm, 조사면 $10{\times}10cm^2$으로 고정하고 최대선량점에 400 cGy로 조사하였다. 선량분포는 열린 조사면과 $15^{\circ}$, $30^{\circ}$, 그리고 $45^{\circ}$ 금속쐐기필터와 기능강화 동적쐐기필터를 사용 하였을 때 비교 평가 하였다. $15^{\circ}$ 금속쐐기필터를 사용하면 조사면내 표면선량과 선량증가영역 선량은 기능강화 동적쐐기필터보다 증가하였다. $30^{\circ}$ 금속쐐기필터를 사용하면 조사면내 표면선량과 선량증가영역 선량은 기능강화 동적쐐기필터 보다 감소하였다. $45^{\circ}$ 금속쐐기필터를 사용하면 조사면내 표면선량과 선량증가영역 선량은 많은 차이로 감소하였다. 조사면 주변 반음영 영역에서는 두꺼운 방향은 증가하고 얇은 방향은 감소하였다. 선량분포를 변화하고자 하는 치료 부위에 금속쐐기필터를 적절히 사용하고 유방암 치료와 같이 표면과의 거리가 가까워지지 않으면 표면 및 선량증가영역 선량이 감소하리라 사료된다.

Oxide perovskite crystals type ABCO4:application and growth

  • Pajaczkowska, A.
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
    • /
    • pp.258-292
    • /
    • 1996
  • In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

  • PDF

다엽 콜리메이터(Multileaf Collimator)와 합금납 차폐물(Lead Alloy Block)의 반 그림자영역의 선량 분포상의 특성 비교 (Dosimetric Characteristics on Penumbra Regions of the Multileaf Collimator as Compared with the Lead Alloy Block)

  • 이상욱;오영택;김우철;금기창;윤성익;김현수;박원;추성실;김귀언
    • Radiation Oncology Journal
    • /
    • 제13권4호
    • /
    • pp.391-396
    • /
    • 1995
  • 목적 : 컴퓨터의 발달에 힘입어 3-D Conformal Radiotherapy(3-D CRT)가 가능하게 되었고 3-D CRT를 위해서는 다엽콜리메이터(MLC)가 필수적인 장치이다. 이에 본 저자들은 MLC 사용시 반그림자(Penumbra)의 크기와 그 특성을 알아보고 기존의 합금납(lead alloy block)을 사용할 때의 반그림자와 차이를 비교 분석하여 임상에서 다엽콜리메이터(MLC)의 이용에 도움이 되고자 본 연구를 계획하였다. 방법 : MLC와 합금납의 반그림자를 측정하기 위해 6MV 와 10MV 에너지의 방사선을 이용하여 필름선량분석을 시행하였다. 필름에 각에너지의 dmax와 10cm 두께의 폴리스탈린 판톰을 올려 놓고 측정하였고, MLC의 종단면과 조사면의 y축과 이루는 각도를 변화시키면서 Effective penumbra($20{\%}-80{\%}$)와 $10{\%}-90{\%}$ 반그림자를 측정하였다. 결과 : MLC의 각도가 0o에서 75o로 증가함에 따라 반그림자의 크기가 증가 하였고, 반그림자 영역에서 등선량곡선의 부채살모양이 심화 되었다. dmax에서 보다 10cm 깊이에서 반그림자의 크기가 약간 증가하였고, 에너지가 증가 하면서 약간 반그림자가 커지는 경향성만 보였다. 합금납을 사용할 경우의 반그림자보다 MLC를 사용할경우 최대 4.8mm가 더 크게 측정되었다. 결론 : 3-D CRT를 시행함에 있어서 반그림자 영역에서는 기존의 합금납 차폐물을 대신하여 MLC를 사용하여도 무방하리라는 결론을 얻을 수 있었다.

  • PDF

In-Sb-Te 박막의 결정화 거동에 관한 투과전자현미경 연구 (A Transmission Electron Microscopy Study on the Crystallization Behavior of In-Sb-Te Thin Films)

  • 김청수;김은태;이정용;김용태
    • Applied Microscopy
    • /
    • 제38권4호
    • /
    • pp.279-284
    • /
    • 2008
  • 상변화 메모리 재료로 사용 가능한 In-Sb-Te (IST) 박막을 RF 마그네트론 스퍼터링법을 사용하여 증착한 후 열처리를 통해 온도에 따른 결정화 거동 및 미세구조를 투과전자현미경(TEM)을 통해 분석하였다. IST 박막은 as-dep 상태에서 비정질상으로 존재하였으며, 열처리 온도에 따라 결정상인 InSb, $In_3SbTe_2$, InTe으로 상변화가 일어났다. 이러한 상변화는 기존의 삼원계 상태도와 다른 비평형 상태에서의 상변태가 이루어짐을 확인할 수 있다. 상변화 과정 중 박막의 두께가 무질서하게 배열되었던 비정질상에서 규칙적인 배열을 갖는 결정질상으로 변할수록 감소하는 경향을 확인하였다. 또한 각각의 결정립의 크기도 온도가 증가할수록 증가하는 것을 관찰하였다. 특히, $350^{\circ}C$ 열처리한 박막의 InSb 상은 비정질 상태에서 표면에너지가 가장 낮은 {111}면을 따라 facet을 이루며 결정화가 이루어졌다. 온도가 증가함에 따라 $In_3SbTe_2$로 상변화가 일어났는데, $400^{\circ}C$ 열처리한 시편의 경우 미소영역에서 마이크로 트윈들이 관찰되었다. 이 면결함은 {111}면을 따라 양쪽의 격자점들이 일치하는 정합 쌍정립계를 이루고 있었으며, $450^{\circ}C$에서 동일영역을 관찰해 본 결과 쌍정 결함들이 치유되어 {111} facet 면을 이루고 있는 것을 확인하였다. 또한 비교적 작은 영역에서 상분리가 일어난 InTe 상도 관찰하였다. InTe 상의 경우 포정반응 온도인 $555^{\circ}C$보다 낮은 온도에서 관찰되었는데, InTe의 (002)면과 $In_3SbTe_2$의 (111)면이 비슷한 면간거리를 가지고 있음을 확인하였다. 추가적으로 $500^{\circ}C$ 이상의 온도에서 이들의 결정학적 관계에 따른 상변화 과정에 연구가 수행되어야 할 것으로 생각된다.

은나노와이어·전도성고분자 하이브리드 필름을 이용한 유연 투명 정전용량형 압력 센서의 특성 (Characteristics of Flexible Transparent Capacitive Pressure Sensor Using Silver Nanowire/PEDOT:PSS Hybrid Film)

  • 안영석;김원효;오해관;박광범;김건년;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제23권3호
    • /
    • pp.21-29
    • /
    • 2016
  • 본 연구에서는 유연하고 투명한 특성을 지닌 유연 투명 정전용량형 압력 센서를 제안하여 기존의 X, Y 좌표 위치 인식이 가능할 뿐만 아니라 3차원 인식이 가능한 터치스크린을 제작하였다. 유연 투명 정전용량형 압력 센서는 상부 기판, 압력 감지층, 하부 기판의 3 중 구조로 구성되어 있다. 은나노와이어 전도성고분자 하이브리드 필름이 상부 및 하부 기판으로 사용되었다. 유연 투명 정전용량형 압력 센서의 터치 면적은 5인치이며, 전기적 신호를 인가하기 위한 11개의 driving line과 정전용량의 변화를 감지하기 위한 19개의 sensing line으로 구성되었다. 은나노와이어 전도성고분자 하이브리드 필름 및 유연 투명 정전용량형 압력 센서의 전기적, 광학적 특성을 평가하였다. 또한 기계적 유연성을 평가하기 위하여 굽힘 시험을 수행하였다. 제작된 은나노와이어 전도성고분자 하이브리드 필름은 평균 투과율 91.1%, 평균 탁도 1.35%로서 매우 우수한 광학 특성을 나타내었고, 평균 면저항은 $44.1{\Omega}/square$이었다. 굽힘 시험 결과 은나노와이어 전도성고분자 필름은 곡률 반경 3 mm까지 저항의 변화가 거의 없어 매우 우수한 유연성을 갖고 있음을 알 수 있었다. 또한 200,000회의 반복 굽힘 피로 시험 결과, 저항의 증가는 매우 미미하여, 유연 내구성이 매우 우수함을 알 수 있었다. 유연 투명 정전용량형 압력 센서의 평균 투과율은 84.1%, 탁도는 3.56%이었다. 또한, 직경 2 mm의 팁으로 눌렀을 경우, 누르는 압력에 따라 센서가 잘 작동함을 알 수 있었으며, 이를 통하여 멀티 터치 및 멀티 포스 터치가 가능함을 확인하였다. 본 연구에서 제작한 유연 투명 정전용량형 압력 센서는 유저인터페이스, 사용자 경험이 강조되고 있는 현재 상황에서 새로운 인터페이스의 터치스크린 패널에 대한 발전 가능성을 제시할 수 있을 것이라 판단된다.

EFG 법으로 성장한 β-Ga2O3 단결정의 Sn 도핑 특성 연구 (Characteristics of Sn-doped β-Ga2O3 single crystals grown by EFG method)

  • 제태완;박수빈;장희연;최수민;박미선;장연숙;이원재;문윤곤;강진기;신윤지;배시영
    • 한국결정성장학회지
    • /
    • 제33권2호
    • /
    • pp.83-90
    • /
    • 2023
  • 최근 전력반도체 소재로 관심을 가지는 Ga2O3의 β-상은 열역학적으로 가장 안정한 상을 가지며 4.8~4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 절연파괴전압을 갖는다. 이러한 우수한 물리적 특성으로 인해 전력반도체 소재로 많은 주목을 받고 있다. β-Ga2O3는 SiC 및 GaN의 소재와는 다르게 액상이 존재하기 때문에 액상 성장법으로 단결정 성장이 가능하다. 하지만 성장한 순수 β-Ga2O3 단결정은 전력 소자에 적용하기에는 낮은 전도성으로 인해 의도적으로 제어된 도핑 기술이 필요하며 도핑 특성에 관한 연구가 매우 중요하다. 이 연구에서는 Ga2O3 분말과 SnO2 분말의 몰 비율을 다르게 첨가하여 Un-doped, Sn 0.05 mol%, Sn 0.1mol%, Sn 1.5 mol%, Sn 2 mol%, Sn 3 mol%의 혼합분말을 제조하여 EFG(Edge-defined Film-fed Growth) 방법으로 β-Ga2O3 단결정을 성장시켰다. 성장된 β-Ga2O3 단결정의 Sn dopant 함량에 따른 결정 품질 및 광학적, 전기적 특성 변화를 분석하였으며 Sn 도핑에 따른 특성 변화를 광범위하게 연구하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF