• 한국표면공학회지
• /
• 제40권3호
• /
• pp.117-124
• /
• 2007

The ITO films were deposited on glass substrates by RF-superimposed dc reactive magnetron sputtering and were annealed in $N_2$ vacuum furnace with temperatures in the range of $403K{\sim}573K$ for 30 minutes. Electrical, optical and structural properties of ITO films were examined with varying annealing temperatures from 403 K to 573 K. The resistivity of as-deposited ITO films was $5.4{\times}10^{-4}{\Omega}cm$ at the sputter conditions of applied RF/DC power of 200/200 W, $O_{2}$ flow of 0.2 seem and Ar flow of 0.2 seem. As a result of annealing in the temperature range of $403K{\sim}573K$, the crystallization occurred at 423 K that is lower than the crystallization temperature caused by a conventional sputtering method. And the resistivity decreased from $5.4{\times}10^{-4}{\Omega}cm\;to\;2.3{\times}10^{-4}{\Omega}cm$, the carrier concentration and mobility of ITO films increased from $4.9{\times}10^{20}/cm^3\;to\;6.4{\times}10^{20}/cm^3$, from $20.4cm^2/Vsec\;to\;41.0cm^2/Vsec$, respectively. The transmittance of ITO films in visible became higher than 90% when annealed in the temperature range of $423K{\sim}573K$. High quality ITO thin films made by RF-superimposed dc reactive magnetron sputtering and annealing in $N_2$ vacuum furnace will be applied to transparent conductive oxides of the advanced flat panel display.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.133-138
• /
• 2009

Effects of bipolar pulse driving frequency between 50 kHz and 250 kHz on the discharge shapes were analyzed by measuring plasma characteristics by OES (Optical Emission Spectroscopy) and Langmuir probe. Plasma characteristics were modeled by a simple electric field analysis and fluid plasma modeling. Discharge shapes by a continuous dc and bipolar pulsed dc were different as a dome-type and a vertical column-type at the cathode. From OES, the intensity of 811.5 nm wavelength, the one of the main peaks of Ar, decreased to about 43% from a continuous dc to 100 kHz. For increasing from 100 kHz to 250 kHz, the intensity of 811.5 nm wavelength also decreased by 46%. The electron density decreased by 74% and the electron temperature increased by 36% at the specific position due to the smaller and denser discharge shape for increasing pulse frequency. Through the numerical analysis, the negative glow shape of a continuous dc were similar to the electric potential distribution by FEM (Finite Element Method). For the bipolar pulsed dc, we found that the electron temperature increased to maximum 10 eV due to the voltage spikes by the fast electron acceleration generated in pre-sheath. This may induce the electrons and ions from plasma to increase the energetic substrate bombardment for the dense thin film growth.

• Journal of Information Display
• /
• 제8권2호
• /
• pp.10-14
• /
• 2007

A blazed $GxL^{TM}$ device is described as having high optical efficiency (> 70% for RGB lasers), and high contrast ratio (> 10,000:1), and that is highly reliable when used in a large-area laser projection system. It has a robust design and precise stress control technology to maintain a uniform shape (bow and tilt) of more than 6,000 ribbons, a $0.25-{\mu}m$ CMOS compatible fabrication processing and planarization techniques to reduce fluctuation of the ribbons, and a reliable Al-Cu reflective film that provided protection against a high-power laser. No degradation in characteristics of the GxL device is observed after operating a 5,000- lumen projector for 2,000 hours and conducting 2,000 temperature cycling tests at $-20^{\circ}C$ and $+80^{\circ}C$. At the 2005 World Exposition in Aichi, Japan the world's largest laser projection screen with a size of 2005 inches (10 m ${\times}$ 50 m) and 6 million pixels (1,080 ${\times}$ 5,760) was demonstrated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.424-427
• /
• 2002

In this papaer, there is a basic research for the development of the Hybrid digital radiation detector with a new system, make up for existing digital radiation detector of direct/indirect method with a weak point. for enhance the efficiency characteristics of signal response from X-ray detector using the a-Se, We make sample with various kinds of layer, through the ratio of As(0.l%,0.3%,0.5%,1%,1.5%,5%,10%). We measure net charge with a leakage current and photo current for electric charateristics. Ratio of As in a-Se consist of 7 stage, It made of using the thermal deposition system, In the made of samples, we made multi layer using the EFIRON optical adhesives from phosphor layer consist of Oxybromide$(BrO_2)$. As a result of X-ray measurement, the best result is ; leakage current(0.30nA/cm2), net charge(610.13pC/cm2/mR) when the condition is voltage(9V/um), 0.3% ratio of As in multi layer(BrO2 + a-Se)

• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.81-84
• /
• 2010

Al-doped ZnO (AZO) films were prepared by an Ar:$H_2$ gas radio frequency (RF) magnetron sputtering system with a AZO ($2\;wt{\cdot}%\;Al_2O_3$) ceramic target at the low temperature of $100^{\circ}C$ and annealed in hydrogen ambient at the temperature of $300^{\circ}C$. To investigate the influence of the $H_2$ flow ratio on the properties of the AZO films, the $H_2$ flow ratio was changed from 0.5% to 2%. As a result, the AZO films, deposited with a 1% $H_2$ addition, showed a resistivity of $11.7\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$. When the AZO films were annealed at $300^{\circ}C$ for 1 hour in a hydrogen atmosphere, the resistivity decreased from $11.7\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$ to $5.63\;{\times}\;10^{-4}\;{\Omega}{\cdot}cm$. The lowest resistivity of $5.63\;{\times}\;10^{-4}{\Omega}{\cdot}cm$ was obtained by adding 1% hydrogen gas to the deposition and annealing process. The X-ray diffraction patterns of all the films showed a preferable growth orientation in the (002) plane. The spectrophotometer measurements showed that the transmittance of 85% was obtained by the film deposited with the $H_2$ flow ratio of 1% at 940 nm for GaAs/GaAlAs LEDs.

• 한국광학회지
• /
• 제3권4호
• /
• pp.244-251
• /
• 1992

$SiO_{2}$를 덮개층으로하는 $Si_{3}N_{4}$ rib 도파로의 $Si_{3}N_{4}-SiO_{2}$ 계면에 브래그격자를 제작하여 매립된 형태의 단일모우드 브래그필터 도파로를 설계하고 제작하였다. HF 완충용액을 사용하여 $Si_{3}N_{4}$ 코어층에 브래그격자를 식각하였으며 1nm까지 식각깊이를 제어하며 균일하게 식각할 수 있었다. 이러한 매립된 형태의 브래그필터는 그 특성이 소자표면의 오염에 영향을 받지 않는다. 브래그필터의 파장스펙트럼 측정에서 도파로의 모우드굴절률과 반사대역폭을 결정하고 이를 계산과 비교하여 논의하였다. 브래그필터의 도파코어층에 미세히터와 silicone rubber의 덮개층을 올려 필터파장을 가면할 수 있는 도파로 가변 필터소자를 제작하였다. 그 결과 브래그파장은 전류의 제곱에 비례하여 단파장 쪽으로 이동하였으며, 이동량은 10mA의 전류에 대해 0.41nm이다.

• 태양에너지
• /
• 제20권2호
• /
• pp.55-65
• /
• 2000

이온빔 스퍼터링을 이용하여 Indium tin oxide (ITO)박막을 증착하였다. Ar 가스만을 이용하여 플라즈마를 형성한 경우와 $O_2$를 첨가한 경우에 대해 기판온도를 상온에서 $200^{\circ}C$까지 증가시키면서 온도의 영향을 관찰하였으며 이온빔 에너지의 변화가 박막의 특성에 미치는 영향을 관찰하였다. Ar 이온만으로 증착한 ITO 박막은 domain 구조를 보였으며 Ar+$O_2$ 이온으로 증착한 경우 grain 구조를 나타내었다. Ar 이온만으로 증착된 ITO박막의 전기 비저항의 최소값은 $100^{\circ}C$ 기판온도에서 $1.5\times10^{-4}{\Omega}cm$ 값을 보였으며 산소 첨가의 경우에는 $150^{\circ}C$에서 $4.3\times10^{-4}{\Omega}cm$이었다. 모든 박막이 $100^{\circ}C$이상의 기판 온도에서 가시광 영역에서의 투과도는 80%이상의 값을 보였다.

• 한국광학회지
• /
• 제31권4호
• /
• pp.169-175
• /
• 2020

격자의 구조가 간단하고 격자의 대조비가 낮은 SBC 시스템 구성을 위한 무편광 유전체 다층박막 회절격자를 설계하였다. SBC 방법으로 결합한 빔의 빔 품질을 높게 유지하기 위하여 회절격자의 파면 왜곡이 최소화되는 구조를 제안하였으며, 오염에 의한 흡수가 발생하지 않고 회절격자를 제작할 수 있는 구조로 회절격자를 최적화 설계하였다. 설계된 회절격자는 1055 nm 중심파장에서 Littrow 각도로 입사하는 경우 무편광 -1차 회절 효율이 99.36%이었으며, 96% 이상의 무편광 회절 효율을 나타내는 공정 여분이 확보되어 있음을 확인하였다.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.526-531
• /
• 1998

HVPE(hydride vapor phase epitaxy)법으로 (111) $MgAl_2O_4$기판 위에 $10~240\mu{m}$두께의 GaN를 성장하고, GaN의 두께에 따 광학적 성질을 조사하였다. $MgAl_2O_4$기판 위에 성장된 GaN의 PL 특성은 결정성장온도에서 기판으로부터 Mg이 out-diffusion하여 auto-doping 됨으로써 불순물이 첨가된 GaN의 PL 특성을 나타내었다. 10K의 온도데서 측정된 PL 스펙트럼은 자유여기자와 속박여기자의 재결합천이에 의한 피크들과 불순물과 관련된 도너-억셉터 쌍 사이의 재결합 및 이의 포논 복제에 의한 발광으로 구성되었으며, 깊은 준위로부터의 발광은 나타나지 않았다. 중성 도너에 속박된 여기자 발광 에너지와 라만 $E_2$모드 주파수는 GaN의 두께가 증가함에 따라 지수 함수적으로 감소하였으며, GaN 내의 잔류 응력에 대하여 라만 E2 모드 주파수는$\Delta$$\omega$=3.93$\sigma$($cm^{-1}$/GPa)의 관계로 변화하였다.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.91-98
• /
• 2009

Conjugated PPV-derived block copolymers containing 2-ethylhexyloxynaphthalene unit were synthesized and characterized in this study. The resulting polymers were soluble in common organic solvents and showed good thermal stabilities, The weight-average molecular weights ($M_w$) of the copolymers ranged from 246,000 to 475,000 with PDIs of $1.3{\sim}2.1$. The optical properties of these polymers, measured both in a chloroform solution and on a film, showed a maximum absorption at $405{\sim}476\;nm$ for Copolymers $I{\sim}VIII$. In the PL spectra, Copolymers $I{\sim}VIII$ showed maximum peaks at $510{\sim}566\;nm$. The HOMOs, LUMOs and band gaps of the PPV derivatives of Copolymers $I{\sim}VIII$ were $5.30{\sim}5.77$, $3.04{\sim}3.24$, and $2.5{\sim}2.2\;eV$, respectively, The multi-layered, light-emitting diodes of ITO/PEDOT/copolymers/LiF/Al exhibited turn-on voltages of $6{\sim}2.5\;V$ Copolymer VIII exhibited the maximum brightness of $3.657\;cd/m^2$. Particularly, Copolymer VII, with an identical composition of MEH-PPV and naphthalene-PPV, showed a maximum luminance efficiency and power efficiency of 2,63 cd/A and 1.06 lm/W, respectively.