• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.833-837
• /
• 2007

In this study, we have fabricated a gain flattened erbium-doped optical fiber amplifier. Gain flattening filters were realized by the strain-induced long period fiber gratings, which are made of periodically arrayed metal wires. Using the filter of $550{\mu}m$ period, spontaneous emission amplified at C-band wavelength by a 980nm pumping laser was flattened within 1dB of gain ripple. The performance of the simultaneous multi channel amplification was measured using a fabry-perot laser diode. Amplification ratio was above 20dB. This amplifier can be applied to the long distance transmission system based on a wavelength division multiplexing for boosting an attenuated signal.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2495-2497
• /
• 1998

Fiber optic facilities are increasingly being deployed in loop applications for both busines and residential areas. These facilities support a variety of communications services that include high speed data and video using leading technologies such as Synchronous Optical Network (SONET), Wavelength Division Multiplexing(WDM). This proliferation of fiber optic facilities combined with the increasing pressure on network operators to reduce costs are fostering increased automation to reduce labor costs associated with providing and maintaining communications services. Effective fiber management and accurate records can improve the reliability and integrity of the future telecommunications networks and the quality of customer services. This paper describes the trend forward and the need for the deployment of Fiber Administration System (FAS) into the operations enviroment of a typical network provider.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.339-342
• /
• 2005

In long-period fiber grating (LPFG) to be made up optical fiber sensors, resonance coupling occurs between the forward-propagating core mode and cladding modes at the wavelength that satisfy the Phase matching condition. The resonance wavelength and the coupling strength depends strongly on the external environment like temperature, strain, and ambient index. These characteristics can be utilized for various applications as optical fiber sensors. fabrication of optical fiber gratings is typically based on the photosensitivity effect, i.e. the permanent change of the refractive index upon irradiation of the UV beam, and therefore, fabrication of the optical fiber with high phososensitivity is an important part of the research on optical fiber gratings. In this work, we measured the effort of to-doping of boron on the index difference between the core and cladding of the optical fiber and the sensitivity of the LPFC to the temperature and bending changes. We observed that the index difference between the core and the cladding decreased by $(1.69{\times}10^{-4}/SCCM)$ and the temperature sensitivity of the resonance wavelength shirt decreased by $(0.01145nm/^{\circ}C/SCCM)$. The dependence or the bending-induced changes or the transmission characteristics of LPFG on the tore-cladding index difference was investigated experimentally. The measurement results indicate that the bending sensitivity increases as the index difference decreases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.4
• /
• pp.161-166
• /
• 1982

In this paper, the intrinsic birefringence and twist-induced rotation of the single mode optical fiber have been investigated. On the analysis, the optical fiber has been modeled as a linear retarder and the intrinsic linear retardation of the single mode optical fiber is approximately found to be 2.57'/m from the measurement. Theoretically analyzing the twist-induce rotation by the purturbation theory, it is found that the magnitude of the twist-induced rotation varies linearly with the twisted angle. And this theorerical result has been in good accord with the experimental result.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.224-229
• /
• 2003

We realized a depolarizer based on two 2$\times$2 directional couplers and single mode optical fiber. A reduction method for the degree of polarization is demonstrated by using computer simulation, which is verified experimentally. The degree of polarization is -20 dB for the polarized input beam of spectral width less than 0.05 nm. The experimental results verify that the polarization noise, which is due to the change of the input polarization state, can be reduced by making the fiber-ring delay-line length greater thanthecoherencelengthofthesource.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.280-282
• /
• 1998

Communications, data storage or computation by manipulating the optical signals have the strong advantages over the traditional electronic circuits in regard to the data handling speed and capacity. Effective manipulation of the optical signals, however, requires materials of large nonlinear coefficients and of fast response time. Polymeric materials are one of the promising materials to meet the requirements for nonlinear optical (NLO) materials. (omitted)

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.208-209
• /
• 2004

We propose a dynamic controlling system of dispersion compensation by uisng electromagnetically inudced grating. This has potential applications for active control of dispersion compensation in a broad specteal range of WDM fiber-optic communication channels.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.308-314
• /
• 2017

A particular optical receiver has its own optical receiver modes (ORMs) determined by its optical and electrical filters. Superposing the ORM waveforms at the transmitter, we can generate a new type of optical signals, called ORM signals. After optical detection, they produce pre-specified voltage waveforms accurately, which is advantageous for digital signal processing. Assuming a Gaussian optical receiver, where the optical and electrical filters are Gaussian, we illustrate various phase-shift keying ORM signals using two ORMs by changing their relative phase. We also illustrate multi-level ORM signal patterns using two or more ORMs.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.261-267
• /
• 2008

In this paper, we propose and demonstrate a cost-effective technique to upgrade the capacity of dense wavelength division multiplexing (DWDM) networks to a 40 Gb/s line rate using the existing 10 Gb/s-based infrastructure. To accommodate 40 Gb/s over the link optimized for 10 Gb/s, we propose applying a combination of super-FEC, carrier-suppressed return-to-zero, and pre-emphasis to the 40 Gb/s transponder. The transmission of 40 Gb/s DWDM channels over existing 10 Gb/s line-rate long-haul DWDM links, including $40{\times}40$ Gb/s transmission over KT's standard single-mode fiber optimized for 10 Gb/s achieves successful results. The proposed upgrading technique allows the Q-value margin for a 40 Gb/s line rate to be compatible with that of 10 Gb/s.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2013

High performance plastic optical fiber (POF) $N{\times}N$ star couplers are implemented based on fusing and combining technology. A set of cladding-removed POFs are fused into a solid body by heating and pressing them together to form the transition region between the input and output sides. The operation principle of the proposed star coupler is explained based on ray optics. To demonstrate the performance of the device, $2{\times}2$, $4{\times}4$ and $6{\times}6$ type POF couplers were fabricated and characterized. Performances of the POF star couplers were evaluated in terms of the flatness of the coupling ratios and excess losses.