• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.397.1-397
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.356-361
• /
• 2004

가동자석형 픽업 구동기를 조립하는 경우 조립 전후에 오차가 발생하게 된다. 즉, 렌즈홀더 와 스프링홀더 A'SSY 를 요크에 조립하기 전자 후에 렌즈홀더가 shift 된 양을 살펴보면 상당한 편차가 있음을 볼 수 있다. 이것은 자석 중심과 요크 중심이 어긋날 경우 자석과 요크 사이에 발생하는 자기력의 영향으로 발생하는 것으로, 자기해석을 수행한 결과 자석과 요크의 크기에 따라 자기력의 영향이 달라짐을 확인할 수 있었고, 개발모델에 적용하여 조립성능이 향상됨을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.378-380
• /
• 2002

There has been lower the tilt margin by the increase of coma aberration due to the reduction of wave-length and the increase of numerical aperture for high density recording. The RF signal degradation is increased as the decrease of tilt margin. To compensate the tilt margin, the optical pick-up actuator for high-speed CD/DVD re-writable system should be able to drive the radial-tilt motion. We announce that the 3-axis drive actuator for high-speed CD/DVD rewritable system. And what was more, the DC/AC sensitivities of this actuator are suitable fur the low-speed playability, the high-speed readability and the high-speed rewritability.

• 대한전자공학회논문지TC
• /
• 제47권12호
• /
• pp.24-30
• /
• 2010

Super-RENS (Super-Resolution Near-field Structure) 디스크 시스템은 BD (Blu-ray Disc) 이후의 차세대 광 기록 저장 시스템의 유망한 후보이다. 따라서 super-RENS 시스템을 위한 등화기 개발과 성능 분석을 위해 정확하고 신뢰성 있는 채널 모델링은 매우 중요하다. 본 논문에서는 super-RENS 시스템의 모델링을 위해 SCPWL (Simplicial Canonical Piecewise-Linear) 모델을 적용하고자 한다. Super-RENS 디스크로부터 획득한 RF 신호 샘플들을 사용하여 모의실험을 수행한 결과, super-RENS 시스템의 비선형 모델링을 위해 SCPWL 모델이 효과적으로 활용될 수 있다는 것을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.248-251
• /
• 2004

근접장 초해상 기술 중 대표적인 Super-RENS (Super Resolution Near Field Structure) 기술을 이용하여 25GB 용량의 BD(Blu-ray Disc) 다음 세대로 예상되는 100 ${\sim}$ 200 GB 용량의 Media 및 기록 재생 기기를 개발하고자 한다. 현재까지 이 기술의 어려움이었던 Stability 특성은 10만회 재생 내구성을 확인하엿고 CNR (신호 대 잡음 비) 특성은 50 nm 미세 마크에 대하여 40 dB의 특성을 확보 하였다. 이 특성은 대략 75 GB에 대응하는 것으로 BD System을 그대로 사용하면서 달성한 세계 최고의 기록 밀도로 평가된다. 향후 과제는 Jitter. Error Rate등 실제 신호 특성의 확보로서, 이의 확보를 통하여 기술의 상품화 가능성이 확인될 것이다.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.578-583
• /
• 2014

Optical pick-up is a core component for data read/write operations in optical disc drives, and an optical pick-up performance evaluator is an instrument used to analyze the overall performance of an optical pick-up. Due to inevitable errors in an analog measurement circuit, resultant evaluation data is not guaranteed to be accurate. In this paper, a calibration method for an optical pick-up performance evaluator is proposed to ensure evaluation accuracy. Measured data is corrected by a 1st order correction function, and a calibration process based on least-square method is utilized to obtain correction coefficients of the correction function. The proposed calibration method is applied to experiments, and enhanced accuracy is presented with resultant evaluation data.

• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.197-202
• /
• 1996

The highly oriented diamond particles were deposited on the mirror-polished (100) silicon substrates in the bell-jar type microwave plasma deposition system using a three-step process consisting if carburization, bias-enhanced nucleation and growth. By adjusting the geometry of the substrate and substrate holder, very dense disc-shaped plasma was formed over the substrate when the bias voltage was below -200V. Almsot perfectly oriented diamond films were obtained only in this dense disc-shaped plasma. From the results of the optical emission spectra of the dense disc-shaped plasma, it was found that the concentrations of atomic hydrogen and hydrocarbon radical were increased with negative bias voltage. It was also found that the highly oriented diamonds were deposited in the region, where the intensity ratios of carbonaceous species to atomic hydrogen are saturated.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1595-1604
• /
• 2009

An Optical disk driver is used in many electronic products besides the computers. In particular, the demands are recently increased as an optical disk player/recorder in the mobile products such as camcorder, portable player or in the home theater appliances, etc. However, the more the mobility is emphasized, the more the optical disk player is exposed to the disturbance inputs. For reducing the possibility of malfunction of the optical disk, we propose a nonlinear controller using the disturbance detecting algorithm based on the Kalman filter. Actual experiments were executed to verify the performance of the proposed method. The proposed method controls the tracking error signal within ${\pm}0.1{\mu}m$.

• 연구논문집
• /
• 통권28호
• /
• pp.229-238
• /
• 1998

비파괴평가의 대상이 되는 소재나 부품은 관련 표준시험편을 이용하여 평가되고, 표준시험편은 평가대상과 동일 또는 유사한 재질로 제작되어야 한다고 규정하고 있다. 따라서 비파괴평가가 요구되는 소재나 부품을 생산, 외국에 수출하기 위해서는 반드시 공인된 설비와 품질관리 체계로부터의 인증이 선행되어야 한다. 본 논문에서는 초음파를 이용한 항공기용 Udimet 720Li 디스크의 비파괴평가를 위하여 ASTM에 규정되어 있는 4340강 초음파 표준시험편의 적용타당성을 제시하였다. 현미경 시험을 통하여 Udimet 720Li 합금의 미세조직을 규명하고, 고출력 초음파 분석시스템을 이용한 펄스의 위상값을 측정하는 방법으로 4340강 표준시험편 및 Udimet 720Li 합금의 초음파 속도와 감쇠값을 구하였다. 결론적으로 4340강 초음파 표준시험편이 Udimet 720Li 디스크의 평가를 위한 표준시험편으로 사용될수 있음을 증명하였다.