• 한국광학회지
• /
• 제3권3호
• /
• pp.148-154
• /
• 1992

홀로 그래피 은염 감광 물질에 위상형 회절격차를 기록하여 71%가 넘는 회절 효율을 얻었다. 화학적 처리가 끝난 후 전자 주사 현미경을 통해 Agfa 8E75 감광유제의 부풀은 모습을 밝혔다. 비경화 정착액, 중크롬산 표백액과 알코올에 의한 급속 전조가 강한 변조효과를 가져와 회절 효율이 20% 이상 증가하였다. Kogelnik 결합과 이론의 중요한 특성 파라미터들에 대해 검토하였으며, 두께 변화에 따른 새로운 파라미터 값을 컴퓨터 시뮬레이션을 통해 제시하였다. 결론적으로 감광유제의 정밀한 두께 제어가 고회절 효율을 얻기 위한 잠재적인 원천으로 작용함을 보였다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.206-218
• /
• 2005

Structural studies of series of 'as spun' and drawn PEEK fibers have been carried out using X-ray diffraction and optical microscopy techniques. The analysis of results suggest that fibers produced at a constant draw ratio with increasing draw temperatures show enhanced orientation and crystalline behaviour. The resolved equatorial and meridional traces provide additional structural parameters in terms of crystallinity, crystallite size, and crystallite thickness. It is concluded that drawing at a temperature below $T_g(i.e.,\;144^{\circ}C)$ results in poorly oriented non-crystalline materials, whereas drawing above $T_g$ results in highly oriented semi crystalline materials. Additional drawing proved to increase the overall orientation with slight improvements in lateral order of the chain molecules. Quantitative analysis revealed that the crystallite size increases with increasing drawing temperature. The results also revealed the increased crystallite size upon additional drawing. Crystalline orientation parameter, $_c$, suggests almost perfect orientation. In all cases, the amorphous orientation is found to be lower than the overall orientation parameter obtained from the optical birefringence. As a result of additional drawing, crystalline orientation was found to increase slightly but the increase in the orientation of non-crystalline material was found to be substantial. An average crystalline density was determined from the orthorhombic unit cell dimensions. It was found to vary as a result of processing conditions. It was also found that the value of the maximum birefringence shows heavy dependence on the chain conformation.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.169-172
• /
• 2009

The ZnO/CuSn/ZnO (ZCSZ) multilayer films were deposited on polycarbonate substrates using reactive RF and DC magnetron sputtering. The thickness of each layer was 50 nm/5 nm/45 nm, respectively. The ZCSZ films showed a sheet resistance of $44{\Omega}$/Sq, which was an order of magnitude lower than that indium tin oxide (ITO) films. Although the ZCSZ films had a CuSn interlayer that absorbed visible light, both films had similar optical transmittances of 74% in the visible wavelength region. The figure of merit of the ZCSZ films was $1.0{\times}10^{-3}{\Omega}^{-1}$ and was greater than the value of the ITO films, $1.6{\times}10^{-4}{\Omega}^{-1}$. From the X-ray diffraction (XRD) analysis, the ITO films did not show any diffraction peaks, whereas the ZCSZ films showed diffraction peaks for the ZnO (100) and (002) phases. The hardness of the ITO and ZCSZ films were 5.8 and 7.1 GPa, respectively, which were determined using nano-indentation. From these results, the ZCSZ films exhibited greater optoelectrical performance and hardness compared to the conventional ITO films.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.182-186
• /
• 2011

A poling method using multiple negative voltage was introduced to fabricate periodically poled lithium niobate (PPLN) devices with quasi-phase matching (QPM) period of $12.9\;{\mu}m$ by utilizing an real-time visualization system. We also performed variation of the electric field during the poling. Two different conventionally used poling method, negative and positive single pulses, were used and the poling quality compared through microscopic images and far-field diffraction pattern analysis. Etched images on the +z and -z surfaces of PPLN showed that negative multiple pulse poling presented the highest periodicity in domain structures among the three methods. Duty ratio and its standard deviation were measured by analyzing far-field diffraction patterns. The newly introduced method of negative multiple pulse poling had duty ratio of 0.42 which was close to the ideal value of 0.50 and standard deviation of 0.020 that was about 3 times smaller than that of the other conventional methods.

• 한국광학회지
• /
• 제19권5호
• /
• pp.360-364
• /
• 2008

회절격자의 회절 효율은 회절격자의 내부에 형성되는 격자의 구조에 의해 영향을 받으며, 이러한 격자의 구조는 변조방식에 의해 결정된다. 컴퓨터 형성 홀로그램(CGH) 역시 기본적으로 회절격자의 원리와 같기 때문에 CGH의 내부에 기록된 패턴은 변조 방식에 따라 달라지며 이 때문에 재생 영상의 성능에 영향을 미치게 된다. 본 논문에서는 이러한 사실을 바탕으로 싸인파 변조 및 구형파 변조 방식에 따른 CGH를 제작하고 재생 영상의 특성을 분석하였다. 또한 각각의 변조방식에 대하여 진폭 및 위상형, 위상형 그리고 이진 위상형 CGH의 재생 능력을 분석하였다.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.6-12
• /
• 2004

Diffraction Bragg gratings consisting of metal (silver) nanoparticles are generated inside a soda-lime glass substrate. After ion-exchanging and annealing processes in the glass, the silver nanoparticles are first formed with the particle diameters of 10 nm ∼ 30 nm. By interfering two CW laser beams at ∼ 60 ${\mu}{\textrm}{m}$ deep under the surface of the nanoparticles-dispersed glass, Bragg gratings with thickness of 15 ${\mu}{\textrm}{m}$ and period of 3.5 ${\mu}{\textrm}{m}$ are generated. Diffraction efficiency of the gratings formed by two TE-polarized beams is three times higher than that by two TM-polarized beams. From this polarization dependence, we have found that strong coupling of the surface plasmons induced on the metal particles may contribute dominantly to generate the diffraction grating.

• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.155-160
• /
• 2024

편광 선택적 빔 분리 격자는 수많은 광학 정보처리 시스템에서 널리 사용되고 있다. 본 논문에서는 고효율 플라즈마 편광 빔 분리기 (PBS)를 설계하기 위하여 Littrow 구조에서 Ag 금속 층으로 구성된 소자를 구현하였다. 구현한 PBS는 투과되는 0차 TE 편광과 반사되는 0차 TM 편광에서 높은 회절효율을 달성할 수 있도록 격자깊이 및 격자 비율을 정확한 모드 전송선로 이론 (Modal Transmission-Line Theory)을 사용하여 최적화하였다. 최적화된 결과로부터 PBS는 입사 파장과 각도에 대한 광대역 특성의 장점을 가지고 있으며, TE, TM 편광 모두에 대하여 95% 보다 높은 효율을 나타내었다. 그러므로, 높은 흡광비를 갖는 이 고효율 PBS 광대역 격자는 우수한 광 회절 장치로 사용될 수 있다.

• 한국광학회지
• /
• 제15권1호
• /
• pp.56-62
• /
• 2004

거친 표면의 형상을 측정하기 위해서 큰 등가파장 회절격자간섭계를 구성하였다. 제안된 시스템은 두 개의 투과회적격자를 사용해서 두 광을 측정물체에 각각 다른 각으로 경사지게 입사시켜서, 그 입사각에 따른 큰 등가파장의 간섭무늬를 얻는다. 이런 등가파장 간섭계는 기존의 광학 간섭계보다 넓은 영역에 걸쳐서 거친 표면을 빠른 시간에 측정할 수 있다. 제안된 시스템은 편광광속분할기와, 광속분할기, 프리즘을 사용해서, 불필요한 광을 제거하는 부분을 설계하여, 회절격자의 불필요한 회절광을 최소화하고, 회절격자의 형상으로 인한 시스템 오차를 줄였다. 뿐만 아니라, 큰 작동거리를 가지며 정렬이 쉽다. 측정정밀도를 향상시키기 위하여 위상편이법을 도입하였고, 등가파장보정법을 제안하였다. 실험을 통해서 측정시스템을 평가해보았다.

• 한국레이저가공학회지
• /
• 제9권3호
• /
• pp.1-5
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps Nd:YVO4 laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 추계학술발표대회 논문집
• /
• pp.114-117
• /
• 2006

Diffraction grating is the optical device which has periodic pattern. Decorative logotypes is the one of application of diffraction grating. In this paper diffraction grating for decorative logotype is fabricated by dot pattern in stead of line pattern. A metallic mold for diffraction gratings is fabricated with a mode-locked 12 ps $Nd:YVO_4$ laser. Laser pulses with a wavelength of 355nm are irradiated on the surface of NOK 80, a mold material, to generate dot patterns. In order to minimize the dot diameter, laser power is set just above the ablation threshold of NOK 80. Results show that the spectrum from the fabricated mold is good enough for some industrial application.