• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.388-389
• /
• 2006

굴절률 등을 측정하기 위한 광센서로 이용하기 위해 광섬유 형태의 마이켈슨 간섭계와 측면 연마된 광섬유를 결합한 구조를 제안하였고, 이를 제작 및 특성 평가하였다. 마이켈슨 간섭계 구성은 광 파워 분기비가 50:50인 광커플러와 센서부로 사용하기 위한 측면 연마한 광섬유를 이용하였다. 그리고 광섬유의 끝단에는 거울 역할을 하도록 은(Silver)을 증착하여 구성하였다. 광섬유 형태의 마이켈슨 간섭계 센서의 센서부 표면에 굴절률 용액을 이용하여 광학적 특성을 평가하였다.

• Journal of the Optical Society of Korea
• /
• 제6권2호
• /
• pp.48-54
• /
• 2002

Experimental study is performed on flashlamp-pumped Ti: sapphire lasers with single, double, and four-partial-ellipse-pump cavities aiming at improving the performance of the lasers. The output energy of 604 mJ per pulse with a width of 25 $\mu$s at a total laser efficiency of 0.13% is achieved in the laser pumped by a light pulse of 45$\mu$s without a fluorescent converter The laser output energy versus its Ti: sappy ire rod length, pumping-light pulse duration, and electrical input energy are discussed with or without using a fluorescent converter. The result shows that much more output energy is obtained il a longer Ti: sapphire-rod laser pumped by a shorter light pulse when its output coupler has an optimized transmittance. In addition, an enhancement of output energy by a factor of 7 is achieved. in the laser using a fluorescent converter LD490.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.142-148
• /
• 2004

In this paper, to detect exciting frequency on the latticed fence structure, fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 180 cm wide and 180 cm high, the optical fiber, 50 m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550 m wavelength, and $3{\times}3$ coupler were used. Excited vibration signal applied to the latticed structure from 200 Hz to 1 KHz. The detected optical signals were compared to the detected acceleration signals and analyzed on the time and frequency domain. Based on the experimental results, fiber optic sensor using Sagnac interferometer detected exciting frequency, effectively. This system can be applied to the structural health monitoring system.

• 한국소음진동공학회논문집
• /
• 제14권7호
• /
• pp.569-576
• /
• 2004

In this paper, to detect external sound frequencies on the latticed structure, fiber optic sensor net using Sagnac interferometer was fabricated and tested. The latticed structure was fabricated with a dimension of 50 cm in width and 50 cm in height. The optical fiber of 50m in length was distributed and fixed on the surface of the latticed structure. Single mode fiber, a laser with 1,550 nm in wavelength, 2 ${\times}$ 2 coupler were used. External sound signal, 240 Hz, 495 Hz, 1.445 kHz, 2k Hz, applied to the fiber optic sensor net and the detected optical signals were compared to the detected microphone signals against time and frequency domains. Based on the experimental results, fiber optic sensor net using Sagnac interferometer detected external sound frequency, effectively. This system can be expanded to the structural health monitoring system.

• 한국광학회지
• /
• 제12권5호
• /
• pp.406-413
• /
• 2001

측면이 코어 가까이 연마된 단일모드 광섬유 위에 금속박막이 포함된 평면 도파로가 올려진 광섬유-평면도파로의 파장 및 편광 선택성에 관하여 이론 및 실험 결과를 보고한다. 금속 박막이 포함된 평면도파로의 특성을 구하기 위한 간단하지만 정확한 해석기법을 기술하였다. 소자를 1차원으로 등가화 시켜 결합모드 이론으로 소자의 거동을 분석하였다. 금속막의 두께와 최상부층 물질의 굴절률이 동작 특성에 미치는 영향을 측정하였고 그 결과는 설명 하였다.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.153-165
• /
• 1995

The design procedure of a GaAs/AlGaAs semiconductor matrix optical switch is presented for a simplified tree architecture in the viewpoint of optical loss. A low loss, 0.537 dB/cm, pin type substrate is designed by considering the loss due to imputity doping at 1.3 $\mu$m wavelength. The operating voltage and the device length of a reversed ${\Delta}{\beta}$ electro-optic directional coupler(EODC) swith which is a cross-point device of the 4${\times}$4 matrix optical switch and the bending loss of rib waveguide are caculated as functions of waveguide parameters and bending parameters. There is an optimum bending radius for some waveguide parameters. It is recommened that higher optical confinement conditions such as wide waveguide width and higher rib-height should be chosen for structural parameters of a low loss and a process insensitive 4${\times}$4 matris optical switch. A 4${\times}$4 optical matrix switch which has a 3 dB loss and a 12 volt operating voltage is designed.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.657-662
• /
• 2014

We demonstrate a simulation of a parallel hybrid fiber amplifier in the C+L-band with a gain controlling technique. A variable optical coupler is used to control the input signal power for both EDFA and RFA branches. The gain spectra of the C+L-band are flattened by optimizing the coupling ratio of the input signal power. In order to enhance the pump conversion efficiency, the EDFA branch was pumped by the residual Raman pump power. A gain bandwidth of 60 nm from 1530 nm to 1590 nm is obtained with large input signal power less than -5 dBm. The gain variation is about 1.06 dB at a small input signal power of -30 dBm, and it is reduced to 0.77 dB at the large input signal power of -5 dBm. The experimental results show close agreement with the simulation results.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1689-1696
• /
• 2020

In this study, we developed a fiber-optic humidity sensor (FOHS) system for the monitoring and detection of coolant leakage in nuclear power plants. The FOHS system includes an FOHS, a spectrometer, a halogen white-light source, and a Y-coupler. The FOHS is composed of a humidity-sensing material, a metal tube, a multi-mode plastic optical fiber, and a subminiature version A (SMA) fiber-optic connector. The humidity-sensing material is synthesized from a mixture of polyvinylidene fluoride (PVDF) in dimethyl sulfoxide (DMSO) and hydroxyethyl cellulose (HEC) in distilled water. We measured the optical intensity of the light signals reflected from the FOHS placed inside the humidity chamber with relative humidity (RH) variation from 40 to 95%. We found that the optical intensity of the sensing probe increased linearly with the RH. The reversibility and reproducibility of the FOHS were also evaluated.

• 전자공학회논문지D
• /
• 제35D권10호
• /
• pp.98-106
• /
• 1998

단일모드 광섬유와 박막도파로 소자들 사이의 효율적인 광전송은 집적광학 시스템의 실현을 위해서 가장 기본적으로 풀어야 하는 필수적인 과제중의 하나인데, 이 때 광섬유와 도파로를 직접 접속시키는 방법은 접속면에서의 필드분포의 불일치로 인해 많은 양의 광전력이 반사되고 발산이 예상된다. 따라서 본 연구에서는 박막도파로와 광섬유의 접속시 경계면에서의 필드분포의 불일치를 피하기위해 uniform 형과 taper 형의 결합 구조를 박막도파로위에 성장시켜 접속시키는 구조를 제안하고 해석하였다. 시뮬레이션 결과 이들 구조가 광섬유로부터 결합도파로 안으로 광파가 전송되면 이후에 박막도파로로 효율적으로 광결합이 일어남을 보였고, 특히 taper 형태의 결합구조가 uniform 형태의 결합구조보다 결합효율 및 소자 제조측면에서 휠씬 더 바람직한 구조임이 증명되었다.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.58-66
• /
• 2002

Tapered 방향성 가중 결합 음향파 도파로를 이용하여 음향광학형 파장가변 광 필터를 LiNbO₃와 Ti 이중 확산 공정 기술을 이용하여 제작하였다. 1551.1㎚ 파장의 TE, TM 입사 편광모드와 173.58㎒ 35㎽ RF구동 신호에 대해서 각각 -14.29㏈, -14.99㏈ 부 모드 억압과 61%, 86% 변환효율이 측정되었다. 파장변화율과 통과 대역폭은 8.6㎚/㎒ 1.8㎚로 측정되었으며, 스위칭 속도는 2.82㎲로 측정되었다. 2.5㎚ 채널 간격에 대해서 약 -l4㏈누화 레벨이 측정되었으며, 부 모드와 채널 간격이 누화에 매우 큰 영향을 미치고있음을 확인하였다.