• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.25-26
• /
• 2006

Azobenzene functionalized polymers have been extensively investigated due to the potential applications in the areas of optical switching, optical elements, optical information storage, and nonlinear optics. These applications are mainly achievable due to photoinduced properties of azobenzene groups with photoisomerization and photoinduced anisotropy. We report applications to the optoelectronic devices using inscribed one-(1D) and two-dimensional (2D) SRGs on azo polymer films. The inscribed holographic SRGs patterns were useful to control or enhance optoelectronic properties such as transparent electrode patterning, hybrid solar cell and ultraviolet GaN-based LED.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.253-260
• /
• 1996

In this paper, a simple scheme of two-stage free-space photonic swiching system for nonblocking optical interconnections has been investigated using holgorams. The multistage system requires a smaller number of interconnections for a given number of inpuut-output nonblocking ports than the single stage system does. Here hologram elements were used to change interconnection beam paths. In order to increase the idffraction efficiency of the hologram elements in photographic plates, a bleaching technique was used, which converts the amplitude hologram to the phase hologram. To show sthe feasibility of our optical interconnection system, it was implemented using the bleached hologram arrays and an LCTV spatial light modulator, and the sytem as a photonic switching system was demonstrated.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.880-883
• /
• 2002

We propose an effective wavelength converter method using frequency shifter for photonic node, and examine the scalability of Generalized Multiprotocol Label Switching (GMPLS) networks. The ana1ysis is examined based on signal to noise ratio (SNR) for present 2.4 and 10 Gbit/s Synchronous Digital Hierarchy (SDH) networks, and next generation 2.7 and 10.8 Gbit/s Optical Transport Networks (OTN) format The proposed 100 channels GMPLS networks using optical frequency shifters are shown to be applicable to transmission network spanning over 1206 km(24 nodes) in 2.7 Gbit/s trunk networks. Transmission over more than 310 km (6 nodes) is also possible in 2.7 Gbit/s Metroporitan Area Networks(MAN).

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.510-514
• /
• 2016

The conventional liquid crystal displays (LCDs) have been using optically uniaxial liquid crystal (LC) medium and this often causes a significant image change at oblique viewing angles. We simulated the viewing angle properties of the biaxial nematic (N_b) phase of a bent-core liquid crystal (BLC) and compared the results with the vertically aligned (VA)- and the in-plane switching (IPS)-LCDs. The N_b phase of the BLC showed a smaller transmittance at the dark state as well as a greater contrast ratio at wide viewing angle. The viewing angle property of the N_b-mode without any compensation film was slightly superior to the IPS-mode with the compensation films eliminating the decross of the polarizers at oblique viewing angle.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.146-147
• /
• 2001

Ferro/antiferroelectricty of liquid crystalline phase of bent-core molecules has attracted great attention since the first discovery of antiferroelectric switching in achiral bent-shaped molecules by Watanabe et at. in 1996. This materials show interesting properties usually observed in chiral system, for example, chiral textures, ferro/antiferrroelectricity, strong SHG activity and linear optical activity. (omitted)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2008

We have theoretically investigated the asymmetry effects on 10[Gb/s] optical duobinary transmitters from the viewpoint of the driving voltage ratios by computer simulations. For driving voltage ratios(=driving voltage/switching voltage) with smaller than 100[%], the transmission performance has been greatly affected by the asymmetry of the bandwidth of LPFs than that of the Mach-Zehnder Modulator driving voltage. On the other hand, for driving voltage ratios with 100[%], the transmission performance has been degraded by the asymmetry of the driving voltage and is not sensitive to that of the bandwidth of LPFs. For the transmission performance within 1[dB] power penalty under the asymmetry condition, the driving voltage ratio with 100[%] has performed better than the low driving voltage ratios.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.469-472
• /
• 2005

To enhance the scalability of high performance packet switches, a two-stage load-balanced switch has recently been introduced, in which each stage uses a deterministic sequence of configurations. The switch is simple to make scalable and has been proven to provide 100% throughput. However, the load-balanced switch may mis-sequence the packets. In this paper, we propose an algorithm called full frame stuff (FFS), which maintains packet order in the two-stage load-balanced switch and has excellent switching performance. This algorithm is distributed and each port can operate independently.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.14-18
• /
• 2000

We have investigated gain flattening of EDFA systems with or without a gain equalizer for WDM long-haul transmission using a re-circulating EDFA loop. Without a gain equalizer, gain variation as small as 2.9 dB was achieved over the 10-nm band of a 100 cascaded EDFA system by the inversion principle. With a gain equalizer based on all-fiber acousto-optic tunable filters, two different config-urations of EDFAs were tested. For a single-stage EDFA scheme, the 21-nm band has shown 3.8 dB of gain variation at 17.4 ∼ 20.3 dB of OSNRs after the 100the stage of EDFAs. For a dual-stage EDFA scheme, a wider bandwidth of 34 nm has shown 3.6-dB variation after 40 cascaded EDFAs.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.233-241
• /
• 1991

Structures, fabrication, and characteristics of top-surface-emitting GaAs four quantum well microlaser are described. The microlasers have good room-temperautre CW characteristivs. The maximum CW laser output is >3mW from a 30 $\mu\textrm{m}$ diameter microlaser and the maximum differential quantum efficiency is >70% from a 10 $\mu\textrm{m}$ diameter microlaser. Active surface emitting laser logic devices are designed and fabricated as a discrete version of a top-surface-emitting laser and heterojunction phototransistor. The active surface emitting laser logic device have high optical gain (>20 overall, >200 differential) and very high on/off ratio. Two-dimensional arrays of top-surface-emitting microlasers and active surface emitting laser logic devices will be critical elements for optical computing, photonic switching and neural network applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.40-46
• /
• 2006

Latching optical switches and optical logic gates AND and OR are demonstrated, for the first time, by the monolithic integration of a vertical cavity lasers with depleted optical thyristor structure, which have not only a low threshold current with 0.65mA, but also a high on/off contrast ratio more than 50dB. By simple operating technique with changing a reference switching voltage, this single device operates as two logic functions, optical logic AND and OR. The thyristor laser fabricated using the oxidation process achieved a high optical output power efficiency and a high sensitivity to the optical input light.