• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.245-251
• /
• 1994

The charateristics of switching between two modes in a ring dye laser has been analyzed by the Monte-Carlo computer simulation. The effect of including pump fluctuations in the first-passage-time (FPT) distributions was compared with the distribution with the quantum fluctuation. The results show the same tendency in both cases, such as steep increases from 0 to peak an exponential decrease in long time range. However the introduction of pumping fluctuation is turned out to shorten the mean FPT. The variation of the mean FPT is examined for the various fluctuationrelated parameters. The mean FPT is lengthened when pump parameter a is increased while it is shorted when Q. $\GAMMA$ are decreased. eased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.937-944
• /
• 2002

The current fast-growing Internet traffic is demanding more and more network capacity. Photonic packet switching offers high-speed, data rate/format transparency, and configurability, which are some of the important characteristics needed in future networks supporting different forms of data. In this paper, we define that optical backbone networks for IP transport consist of optical packet core switches and optical fibers. We propose a multi-link photonic packet switch managing as single media which unifies the whole bandwidth of multiple wavelengths on the optical fiber in the WDM optical networks. The proposed switch uses optical packet memories of output link equally as well as using the WDM buffer. So it cuts down the required number of buffers and realizes of the optical packet memory economically.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.288-293
• /
• 2000

BPM simulation was used in order to fabricate the LiNbO$_3$optical waveguide with optical source of He-Ne laser(λ=0.6328[$\mu$m]). we observed electric field E$_{x}$, E$_{y}$ in the x,y-direction are simulated at the LiNbO$_3$substrate (X1 55[$\mu$m]$\times$Z1 5000[$\mu$m]), where the depth, width and buffer layer of waveguide are 0.2[$\mu$m],4[$\mu$m] and 0.02[$\mu$m] respectively. By applying these parameters of single waveguide to simulate a X-switch, we have chosen index change of 0.002, width of 3[$\mu$m] and angle of 0.4$^{\circ}$~0.6$^{\circ}$of optical waveguide and under these conditions, optical beam propagates cross-side at 0.4$^{\circ}$. When applied switching voltage of 25[V], optical beam of X-switch turns cross-side to bar-side at intersection angle 0.4$^{\circ}$, index change of 0.002, waveguide width of 3[$\mu$m], electrode gap 2[$\mu$m]. By the above results, we can obtain design conditions of theoretical analysis of an X-switch optical waveguide.e.e.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1108-1111
• /
• 2003

We consider geometrical conditions of liquid crystals of bent-shape molecules that result in optically isotropic antiferroelectric structure that can be reversibly switched to birefringent states. An example of an ester based banana-shape substance is discussed that almost fulfills the ideal conditions and provides fast electro-optical switching with or without crossed polarizers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1279-1284
• /
• 2004

In this paper, we propose a novel and simple optical technique for the detection of subcarrier-multiplexed(SCM) labels using optical interleavers. Optical-baseband packet signals with suppressed subcarriers appear at the through-pass port of the optical interleaver and SCM labels with suppressed optical carrier exit from the optical SCM extraction port. Since it does not require optical circulators, this structure shows less insertion loss than the previously proposed optical label detectors. The periodic nature of the interleaver transfer function makes it possible to detect multiple SCM channels simultaneously from an incoming wavelength-multiplexed signal stream. Detection of a 155-Mb/s ASK modulated 9.79-GHz subcarrier using a 10-GHz SCM optical label detector has been performed successfully and verified through optical spectra and bi t-error-rate measurements.

• Korean Journal of Optics and Photonics
• /
• v.25 no.6
• /
• pp.301-310
• /
• 2014

Recently, the fringe-field switching (FFS) mode in liquid crystal displays has been used mainly for high image quality and high-resolution liquid crystal displays (LCDs). In this review paper, the fundamental switching principle of the FFS mode, with its excellence over other LC modes in electro-optic performance, will be described. In addition, the development history, present technical issues, and future of the FFS LCD will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.298.1-298.1
• /
• 2016

Two-dimensional materials have been received significant interest after the discovery of graphene due to their fascinating electronic and optical properties for the application of novel devices. However, graphene lack of certain bandgap which is essential requirement to achieve high performance field-effect transistors. Analogous to graphene materials, molybdenum disulfide ($MoS_2$) as one of transition-metal dichalcogenides family presents considerable bandgap and exhibits promising physical, chemical, optical and mechanical properties. Here we studied nonvolatile memory based on $MoS_2$ which is grown by chemical vapor deposition (CVD) method. $MoS_2$ growth was taken on $1.5{\times}1.5cm^2$ $SiO_2$/Si-substrate. The samples were analyzed by Raman spectroscopy, atomic force microscopy and X-ray photoelectron spectroscopy. Current-voltage (I-V) characteristic was carried out HP4156A. The CVD-$MoS_2$ was analyzed as few layers and 2H-$MoS_2$ structure. From I-V measurement for two metal contacts on CVD-$MoS_2$ sample, we found typical resistive switching memory effect. The device structures and the origin of nonvolatile memory effect will be discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.35-42
• /
• 2003

In this paper, we classified the wavelength reservation mechanisms of optical burst switching (OBS), and investigated the path length priority effect of the offset time/delayed reservation (OT/DR)-based scheme like the just-enough-time (JET) protocol. And, we showed that the fiber delay line (FDL)-based scheme can avoid the path length priority effect in multiple hop network environments. Also, we proposed a novel FDL/DR with hop-by-hop priority increasing (HPI) scheme which can improve the end-to-end throughput by increasing the priority of bursts hop-by-hop using the input FDLs at each node. The simulation results showed that the proposed FDL/DR with HPI scheme could avoid the path length priority effect and enhance the end-to-end throughput in multiple hop network environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1518-1523
• /
• 2005

With the expansion of service over the internet, the recent network demands the amount of the more bandwidth and fast transfer rate. Optical Burst Switching has considered as a promising solution for supporting high-speed Internet Service. Because of OBS architecture, it has the security threats such as eavesdropping, masquerading, denial of service and so on. In this Paper, We analyze OBS-specific security threats and requirement for supporting security protocol n OBS networks. We propose an authentication and key exchange protocol for supporting the security service. This protocol supports explicit key authentication by using the control messages and protects the control message by using the session key.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.94-105
• /
• 2003

OBS(Optical Burst Switching) networks which decouple the burst from its header has characteristic one-way reservation. Therefore, the fault of a fiber link may lead to the magnitude of burst loss. Since sending a header packet and using an offset time before the transmission of the corresponding burst. In this paper, we analysis a offset time based on the burst loss rate resulting from only link failure and by applying the restoration schemes in an optical burst switching networks. The simulation results in terms of the effect of a offset time is evaluated in our network model to verify that comparing the numerical analysis with simulation result. Finally, and through these results, We propose the new restoration scheme based on offset time considered Quality of Service.