• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.491-493
• /
• 2013

This paper proposes a frequency-doubling optoelectronic oscillator employing a novel three-arm dual-output Mach-Zehnder modulator (MZM). One output of the MZM generates the fundamental-frequency signal which is recycled by the microwave optical fiber link for oscillation, and the other output can generate the frequency-doubled signal. Experiment was conducted using a commercial two-arm MZM, a phase modulator, and an optical fiber link of 89 meters in length. A 19-GHz frequency-doubled signal was successively obtained with fundamental signal suppression more than 36 dB.

• Journal of the Optical Society of Korea
• /
• 제11권4호
• /
• pp.192-195
• /
• 2007

A high-conversion efficiency, nanosecond pulsed optical parametric generation and amplification with repetition rate of 20 kHz based on a periodically poled MgO-doped stoichiometric lithium tantalate was presented. Pumped by a Q-switched $Nd:YVO_4$ laser at 1064 nm with a pumping power of 4.8W, the generated output power was 1.6W for the signal and idler waves, achieving a slope efficiency of 50%. Using a seed source at signal wave the amplified signal output-pulse energy reached $65{\mu}J$. The obtained maximum gain was 72.4 dB.

• 정보통신설비학회논문지
• /
• 제10권1호
• /
• pp.14-26
• /
• 2011

광 가입자용 송신 장치는 가입자 접속부의 ATM(Asynchronous Transfer Mode) 계층으로부터 ATM 셀을 비동기적인 방법으로 FIFO(First In, First Out)를 통해 수신하여 Idle/Unasigned 셀의 삽입, 셀에 대한 HEC(Header Error Correction) 계산, 그리고 셀 페이로드에 대한 스크램블링을 통해 VC4 신호 페이로드에 사상한다. 이때 VC4 POH(Path Over Head)상의 H4 바이트에 의해 셀의 시작점을 지시하고 동시에 POH 오버헤드에 대한 생성, 삽입을 통해 VC4 신호를 형성한다. 이 신호는 AU4 포인터 생성부에서 VC4의 시작점 J1을 생성하여 AUG버스를 통해 STM-1 신호 생성 부에서 프레임 형태로 출력된 후 155Mbps 속도로 광 신호로 변환되어 송신된다.

• 한국정보통신학회논문지
• /
• 제7권6호
• /
• pp.1334-1340
• /
• 2003

본 논문에서는 밀리미터파 대역의 신호 발생을 위한 헤테로다인 방식을 제안하였다. 향후, 무선 이동통신, 광대역 통신망에 사용되어질 밀리미터파 신호는 전기적 요소의 한계로 광학적인 요소에 의해 신호를 생성하는 방법을 연구 중에 있다. 광학적인 요소에 의한 여러 가지의 연구들이 광검출기의 기능, 밀리미터파 대역의 발진기의 개발 등이 이루어지고 있으며, 무선 통신망에 적용하기 위한 소자기술 등이 발전되고 있다. 본 논문에서는 향후 밀리미터파 대역에서 사용되어질 LMDS(Local Multi-point Distribution Service) 등의 시스템에서 광원으로 응용 가능한 방법을 제안하였다.

• 전자통신동향분석
• /
• 제34권5호
• /
• pp.91-98
• /
• 2019

Optical frequency comb generators have been investigated as a signal source capable of generating highly stabilized ultrafast pulse lasers. The precise control of the optical frequency comb spacing by RF clock signals has led to a revolutionary paradigm shift in the precise measurement of time and frequency. Optical frequency combs also have advantages such as stable frequency spacing, stable number of lines, and robustness. Owing to these characteristics, optical frequency combs have been applied to the fields of high precision optical clock, communication, spectroscopy, waveform generation, and astronomy. In this article, we introduce the properties (i.e., generation methods, advantages, and so on) of various optical frequency combs, and discuss the expected future technological trends and applications.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.278-282
• /
• 2011

We discuss two possible optical noise sources in an electro-optic camera loaded on a low earth orbit satellite. The first noise source was a reflection at the window for signal rays incident upon the window which is placed before the FPA plane. The second noise source came from a reflection at the surface of the FPA cell when the signal flux is not entirely absorbed. We investigate the noise generation processes for two optical noise sources, and a parametric solution is used to estimate the optical noise effects.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.556-560
• /
• 2009

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. study on FM sideband injection locking has shown that when SLs are locked to the target sidebands of the directly modulated ML, the presence of the unselected sidebands influences the resulting microwave signals. The unselected signals can produce the unwanted beat signals around the desired beat signal, which degrade the overall system performance. This analysis way to generate Giga HZ signal generation.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.47-55
• /
• 1996

An optical transmitter, which is a key component of the optical transmission system, converts the electrical signal to optical signal and consists of a high-speed current-pulse driver for laser diode and low-speed feedback loops that stabilize optical power against aging, power supply voltage fluctuations, and ambient temperature changes. In this paper, the power-stabilizing part, which forms the bulk of the optical transmitter circuitry was designed in integrted circuits. Operational amplifiers and reference voltage generation circuits, which were identified as key building blocks for the power-stabilizing feedback loops, were designed and were subsequently verified through HSPICE simulations. The designed operational amplifier consists of a two-stage folded cascode amplifier and class AB output stage, whereas the reference voltage is obtained by bandgap reference circuits. Finally the power-stabilizing circuitry was laid out based on 3\mu$m CMOS design rules for fabrication.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1076-1081
• /
• 2003

본 논문에서는 반도체레이저를 이용한 밀리미터파 대역의 신호를 생성하는 방법에 대해 제안하였다. 광대역에서의 밀리미터파 신호를 얻기 위해서는 윈하는 공진 주파수대역의 신호를 얻기 위해는 서브 하모닉의 좁은 신호 성분의 하모닉 신호인 다중의 신호를 서로 beating하여 원하는 주파수 대역의 신호를 얻을 수 있다. 따라서 본 논문에서는 반도체레이저를 사용한 광주입 방법을 통하여 실제적으로 원하는 주파수 대역의 신호를 얻기 위해 실험적으로 고찰하였으며, 신호 성분의 성능을 구하기 위해 phase noise 성분을 측정하였다.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.56-64
• /
• 2006

This paper proposes a new and simple input prediction method for robust servo system. A robust tracking control system for optical disk drives to reject disk runout was recently proposed based on both Coprime Factorization(CF) and Zero Phase Error Tracking(ZPET) control. The CF control system can be designed simply and systematically. Moreover, this system has not only stability but also robustness to parameter uncertainties and disturbance rejection capability. Since optical disk tracking servo systems can detect only racking error, it was proposed that the reference input signal for ZPET could be estimated from tracking errors. In this paper, we propose a new control structure for the ZPET controller. It requires less memory than the previously proposed method for the reference signal generation. Therefore, it is very effective in runout control. Furthermore, this method can be applied to defective optical disk like surface defects on disk. Numerical simulation and experimental result show the proposed method effective.