• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.11-17
• /
• 2004

This paper describes the implementation of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been fabricated in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3-metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$, and it has 32.3 ps rms and 335.9 ps peak to peak jitter on loopback testing. the measured power dissipation of whole chip is 1.15 W(230 mW) with a single 5 V supply.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2208-2213
• /
• 2007

In this study we have developed a hyperspectrum imaging system for highly sensitive and effective imaging analysis. An optical setup was designed using acoustic optical tunable filter (AOTF) for high sensitive hyperspectrum imaging. Light emitted by mercury lamp gets split in to diffracted and undiffracted beams while passing though AOTF. GFP transfected HEK-293 cell line was used as a model for in vitro imaging analysis. Cells were first, analyzed by fluorescence microscope followed by flow cytometric analysis. Flow cytometric analysis showed 66.31% transfection yield in GFP transfected HEK-293 cells. Various images of GFP transfected HEK-293 cell were grabbed by collecting the diffracted light using a CCD over a dynamic range of frequency of 129-171 MHz with an interval of 3 MHz. Subsequently, for in vivo image analysis of GFP transfected cells in mouse, a whole-body-imaging system was constructed. The blue light of 488 nm wavelength was obtained from a Xenon arc lamp using an appropriate filter and transmitted through an optical cable to a ring illuminator. To check the efficacy of the newly developed whole-body-imaging system, a comparative imaging analysis was performed on a normal mouse in presence and absence of Xenon arc irradiation. The developed hyperspectrum imaging analysis with AOTF showed the highest intensity of green fluorescent protein at 153 MHz of frequency and 494 nm of wavelength. However, the fluorescence intensity remained same as that of the background below 138 MHz (475 nm) and above 162 MHz (532 nm). The mouse images captured using the constructed whole-body-imaging system appeared monochromatic in absence of Xenon arc irradiation and blue when irradiated with Xenon arc lamp. Nevertheless, in either case mouse images appeared clearly.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.62-67
• /
• 1993

The microscopic origin of nonlinear optical properties of quinoline derivatives have been investigated theoretically using MOPAC-AM1 method. In order to prepare promising nonlinear optical active polymers of polyquinoline derivatives, the optimized positions of strong electron donor and electron acceptor are determined in the heterocyclic ring for the energetically favorable structures. For each compound, the effect of the substituted positions on the microscopic nonlinear coefficients were investigated. Polyquinoline was already evaluated to have outstanding physical and mechanical properties so that its monomeric analogues were designed and synthesized for developing new second and third order nonlinear optical main chain polymers. Using the MOPAC-AM1 method, properties calculated include the intrinsic ground-state dipole moments, the polarizabilities, first and second hyperpolarizabilities under the condition of finite-field $(\omega$ = 0).

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.224-228
• /
• 2008

A highly sensitive integrated photonic temperature sensor was proposed and developed incorporating a polymeric microring resonator. The change in the ambient temperature was estimated by observing the shift in the resonant wavelength of the resonator induced via the thermooptic effect. For the purpose of enhancing its sensitivity, the sensor was built by implementing a polymeric resonator exhibiting a high thermooptic coefficient on a silicon substrate with a small coefficient of thermal expansion. For the range of from $20^{\circ}C$ to $30^{\circ}C$ near the room temperature, the fabricated sensor yielded a sensitivity of as high as 165 ${\pm}/^{\circ}C$ and a resolution of better than $0.1^{\circ}C$. And its performance was found to be hardly affected by the variation in the refractive index of the target analyte, which was applied to the surface of the sensor. It is hence expected that the sensor could be integrated with other refractormetric optical sensors, thereby compensating for the fatal error caused by the change in the ambient temperature.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1289-1293
• /
• 2010

A slipring or FORJ are usually adopted in order for power supply of Geo-centrifuge and input/output data acquisition. Since using slipring causes quite a lot electrical noise, an optical communication using FORJ becomes more general for data acquisition. Such data acquisition devices, however, require frequent maintenance and replacement due to deterioration by long term usage. DICT has set up a real-time wireless date acquisition system using wireless communication technology instead of FORJ. The system enables a remote measurement at any inertial acceleration field up to 100g level and provides as same performance as FORJ. The priority of this system is to use a normal modem substituting a special FORJ.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.68-68
• /
• 2011

A new chemosensor based on rhodamine B (1) for $Hg^{2+}$ and $Cu^{2+}$ was synthesized by one-step condensation reaction of rhodamine B hydrazide and Azo dye. Studying for its fluorogenic and colorimetric behaviors towards various metal ions, extreme sensitivity and selectivity were achieved by the detection of $Hg^{2+}$ and $Cu^{2+}$ over other commonly coexistent metal ions, which were accompanied by ring opening of a rhodamine spirocycle framework. In acetonitrile, the presence of $Hg^{2+}$ and $Cu^{2+}$ induces the formation of a Dye 1-ion complex, which was deduced by spectroscopy.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.71-71
• /
• 2012

To control luminescence emission property, a novel series of strong fluorescent fluorin-boron complexes were synthesized in higher yield. The resulting structural analysis was completed. Small molecules with a built-in fluorine-boron core structural architecture has been attracted considered attention as the key emissive elements due to the their good properties such as bipolar charge transport and high photo efficiency. Thus, new type of fluorine-boron(F-B) complexes are designed and prepared. Changing the substituent position on fluorophore ring provided a deep understanding on the relationship between structure and optical properties.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.524-526
• /
• 1999

It is observed that the mode spacing of an cxternal cavity semiconducror laser can be altered dramatically by the insertion of an intracavity etalon. 111e mode spacing is decreased as a function of etalon's reflectivity and this effect is quantitatively explained by an analysis of resonant modes. We abo show that this effect provides a precise and convenient alternative for determining the coating reflectivity of a high reflectivity etalon. talon.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.166-174
• /
• 1998

The distribution of oil film thickness in piston were measured by induced fluorescence method. A Xe lamp was used as light source. Coumarine-6 was mixed with oil as the fluorescent dye. Fluorescent signal which is proportional to the oil film thickness was acquired by CCD camera and transmitted to the personal computer as video signal. In order to solve the problem of measurement system, irregular distribution and unstability of light intensity, as well as to know the relationship between the oil film thickness and output signal, three different calibration techniques were used. Motoring and firing tests were performed in a single cylinder research engine with transparent liner. By analyzing the oil film thickness converted from the photographed image, it was observed that each of three piston rings scrapes the oil both upward and downward and oil film thickness is not uniform horizontally at a given piston land. The amount of oil in each land was considerably affected by the engine load. It is thought that the blow-by gas blows the oil down to the crankcase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.471-474
• /
• 2002

Three-ring types liquid crystalline compounds having fluoro and isothiocyanate substituent were synthesized and their physical and electro-optical properties were measured to evaluate the applications to active matrix VA liquid crystal displays. The tetrakis(triphenylphosphine)palladium(0) catalyzed cross coupling of aryl boronic acids with aryl halides is used to prepare trans-4'-Alkoxy-2,3-difluoro-3'-isothiocyanato-4-(4-alkylcyclohexyl}-biphenyl series. The synthesized compounds showed the nematic liquid crystalline phase and the negative dielectric anisotropy. The prepared mixtures showed faster response time and lower threshold voltage than their host mixture.