• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

In order to acquire an image in a positron emission tomography, it is necessary to draw the position coordinates of the scintillation pixels of the detector module measured at the same time. To this end, in a detector module using a plurality of scintillation pixels and a small number of photosensors, it is necessary to obtain a flood image and divide a region of each scintillation pixel to obtain a position of a scintillation pixel interacting with a gamma ray. Alternatively, when the number of scintillation pixels and the number of photosensors to be used are the same, the position coordinates for the position of the scintillation pixels can be directly acquired as digital signal coordinates. A method of using a plurality of scintillation pixels and a small number of photosensors requires a process of obtaining digital signal coordinates requires a plurality of photosensors and a signal processing system. This complicates the signal processing process and raises the cost. To solve this problem, in this study, we developed a method of obtaining digital signal coordinates without performing the process of separating the planar image and region using a plurality of flash pixels and a small number of optical sensors. This is a method of obtaining the position coordinate values of the flash pixels interacting with the gamma ray as a digital signal through a look-up table created through the signals acquired from each flash pixel using the maximum likelihood function. Simulation was performed using DETECT2000, and verification was performed on the proposed method. As a result, accurate digital signal coordinates could be obtained from all the flash pixels, and if this is applied to the existing system, it is considered that faster image acquisition is possible by simplifying the signal processing process.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.597-604
• /
• 2004

In stereoscopic television, there is a trade-off between visual comfort and 3-dimensional (3D) impact with respect to the baseline-stretch of a 3DTV camera. It is necessary to adjust the baseline-stretch at an appropriate the distance depending on the contents of a scene if we want to obtain a subjectively optimal quality of an image. However, it is very hard to obtain a small baseline-stretch using commercially available cameras of broadcasting quality where the sizes of the lens and CCD module are large. In order to overcome this limitation, we attempt to freely control the baseline-stretch of a stereoscopic camera by synthesizing the virtual views at the desired location of interval between two cameras. This proposed technique is based on the stereo matching and view synthesis techniques. We first obtain a dense disparity map using a hierarchical stereo matching with the edge-adaptive multiple shifted windows. Then, we synthesize the virtual views using the disparity map. Simulation results with various stereoscopic images demonstrate the effectiveness of the proposed technique.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.589-596
• /
• 2004

Packaging technologies for a broadband and narrowband modulator with a traveling wave electro-absorption modulator (TWEAM) device were developed. In developing a broadband modulator, the effects of the device and packaging designs on the broadband performance were investigated. The optimized designs were obtained through a simulation with the result that we developed a broadband modulator with a 3 dB bandwidth of 38 GHz in the electrical-to-optical (E/O) response, an electrical return loss of less than -10 dB at up to 26 GHz, an rms jitter of 1.832 ps, and an extinction ratio of 5.38 dB in a 40 Gbps non-return to zero (NRZ) eye diagram. For analog application, the effect of the RF termination scheme on the fractional bandwidth was studied. The microstrip line with a double stub as a matching circuit and a laser trimming process were used to obtain an $S_{11}$ of -34.58 dB at 40 GHz and 2.9 GHz bandwidth of less than -15 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.199-199
• /
• 2009

Recently, polymeric microlens arrays have become important elements in many applications. Microlens arrays have been used to enhance luminance efficiency and luminance power efficiency of light-emitting diodes (LEDs) and organic LEDs. Many processes for fabrication of microlens array are studied. Though the MLA has been fabricated by electroformed mold, LIGA process and reflow method, these methods were required masks, multiple process steps and post processing. In this paper, we proposed rapid and direct UV laser direct fabrication process using colorless liquid photopolymer, NOA60 for polarization activated microlens. The microlens arrays are formed on the NOA60 on glass, after the focused laser energy was irradiated to the material. The diameter of MLA was varied from 42 to 88 ${\mu}m$, and the height from 0.9 to 1.6 ${\mu}m$. The MLA fabricated using NOA60 shows more then 85% transmittance as well as good hardness for optical module.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.75-82
• /
• 2016

Visible light communication (VLC) using LED lamps is suitable for implementing an indoor positioning system in an indoor environment where the global positioning system (GPS) signal does not reach. In this paper, we present an indoor positioning system for mobile robots using a VLC beacon and fuzzy rules. This system consists of an autonomous mobile robot, VLC modules, and device application software. Fuzzy rules are applied to plan the global and local paths along which the mobile robot navigates indoors. The VLC transmitter modules are attached to the wall or the ceiling as beacons to transmit their own location information. The variable pulse position modulation (VPPM) algorithm is used to transmit data, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The mobile robot has a receiver module to receive the location information while performing its mission in the environment where VLC transmitters are deployed.

• Korean Journal of Optics and Photonics
• /
• v.25 no.6
• /
• pp.311-314
• /
• 2014

In this paper, we design a helical fin structure for the heat sink for a high-power LED lighting module, and analyze its thermal properties. By means of the helical fin structure, we can obtain about 14% larger surface area for the limited volume and it can decrease the LED chip temperature by about 12%. Because this helical fin heat sink has 15% less total volume than a conventional one, we can also expect to reduce the production cost due to these structural properties.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.85.2-85.2
• /
• 2013

We developed autoguiding system for IGRINS (Immersion Grating Infrared Spectrograph) which is a high resolution near-IR spectrograph. This instrument will be attached on the 2.7m telescope at the McDonald observatory in 2013 November. IGRINS consists of three near-Infrared detector modules, i. e., H and K band spectrograph modules and a K band slit camera module, within which we are using the slit camera for autoguiding of the telescope. Comparing to typical optical CCDs, however, the infrared array shows non-uniform responses, higher noises, and many bad pixels. In this poster, we present methods to improve center finding functions and algorithms for the infrared array and the simulator test results of the IGRINS Slit-Camera Package.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.575-583
• /
• 2000

Pulse oximetry is a well established non-invasive optical technique for monitoring the $SpO_2$ during anaesthesia, recovery and intensive care. Pulse oximeters determine the oxygen saturation level of blood by measuring the light absorption of arterial blood. In the measurement of the hemoglobin oxygen saturation, conventional method has required the technique of filtering of remove the noise, and of complex signal processing algorithm. So much time have been required to signal processing. In this research, we separate AC signal and DC signal in the stage of signal detection. Therefore we simplify the calculation algorithm for $SpO_2$. The implemented system have the high performance such an accuracy and a processing time than the traditional method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.62-66
• /
• 2015

This paper introduces various applications and contents of digital signage, and analyzes conventional communication techniques to increase communication range. To realize digital signage in long distance, this paper proposes a hybrid modulation scheme and analyzes its performance. To verify its performance in real channel environment, we mapped symbols and experimented data transmission and reception with a visible light communication module with USRP. As a result, we confirmed a data receiving range and power of transmission and reception of the hybrid modulation mode. Also, we showed that the proposed modulation scheme has better performance of communication range and power efficiency than that of the conventional QAM technique.