• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.539-544
• /
• 2001

The holographic measurement techniques can be applied to various industrial fields such as automobile, airplane, construction, electronics, medical, mechanics and physics. The visualization of fluids is very important in aerodynamics, heat transfer and stress analysis. There are classically optical methods such as shadowgraph, schlieren method, and Mach-Zehnder interferometry for visualizing the fluid flow phenomena. But, it is difficult to understand the continuous state of fluids well in those methods. In this study, the real-time holographic interferometer with high-speed camera is applied to the flow visualization. In addition, collimated laser beam and rotating wedge are used for recording and formation of carrier fringes, respectively.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.143-147
• /
• 1998

As the accuracy of manufactured goods needed high-accuracy processing has made the efficiency of NC and measurment technology develop, the innovation of machine tools has influence the development of the semi-conductor and optical technology. We can mention that a traction role of the acceleration for the development like that depends on the development of the measurement technics - Stylus instrument method, STM, SEM, Laser interferometer method - which are used for measuring the movement accuracy of machine tools. The movement error factors in movement accuracy are expressed as yaw, roll, and pitch etc. Machining center has 21 movement error factors including of 3 axies joint errors because that has 3 axies and has been measured as the standard of the unloaded condition until now inspite of getting static, dynamic, and servo-gain errors in the case of expending the error range. Therefore, this study tries to measure position accuracy according to loading on the X-Y table of the machining center.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.217-224
• /
• 1994

The combination of both phase-shifting convolution and 2-bit quantization smoothing filter was used to reduce speckle noise from saw-tooth speckle fringes phase map, obtained in phase-shifting speckle interferometer. The phase-shifting convolution showed the noise reduction capability of speckle fringe without destroying edge information across 271 jump. Also, it was shown that the 2-bit quantization smoothing filter was superior to average, low-pass filter and median filter in speeding up smoothing process and enhancing SIN ratio. Finally, a path dependent unwrapping algorithm was used to unwrap a noise reduced 271 modulo speckle phasemap. semap.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1735-1737
• /
• 1996

Using a modified Michelson interferometer configuration, the flatness of micro mirror cell surface was probed. Interferograms were captured at CCD camera plane by defocusing object beam onto the micro mirror with microscope objective lens. And these were compared with the interferograms made with the flat metallic mirror. Also, the theoretical analysis is presented.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1936-1938
• /
• 2002

A tunable fiber laser and the Quadrature Sampling technique are used to construct highly sensitive fiber-optic distributive Bragg grating strain sensor system. By using a wavelength-modulated fiber laser, the variations of strain-dependent Bragg wavelengths are transformed into the variations of time-domain reflection profiles. The locations of profile peaks that correspond to the applied strains are demodulated using a precise wavelength encoder that uses a fiber-optic Mach-Zehnder interferometer and Quadrature Sampling technique. With the extremely high sensitive optical encoder, we could obtain not only high sensitivity, but also very linear responses that was impossible with the conventional techniques. This paper is attempted to report the theoretical and experimental results.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.342-348
• /
• 2007

A high-speed signal processor for Fabry-Perot interferometric sensors using modified ramp modulation is implemented. The main idea for the signal processing is to find a modulation waveform that could induce a linear frequency change in a laser diode to linearize the relationship between the optical phase shift and measurand. It is found that the waveform could be modeled as the addition of a linear term and an exponential term. A signal processor adopting modified ramp modulation technique is implemented and evaluated to find linearity, drift and random walk of $<{\pm}1.5%$, $0.4^{\circ}C$, $5.28{\times}10^{-4}^{\circ}C/{\sqrt{Hz}}$.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.103-113
• /
• 1999

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by the image processing method for the monochromatic incident light. Interference between the reflected lights both on Cr coating of glass disk and on super finished ball makes circular fringes, which are regarded as film thickness together with numbering of fringe order. In this study, we developed technology to measure the film thickness by analyzing dark and bright intensity waves which results from monochrome green light. Two typical fringe patterns only with intensity values 3re examined for the measurement of point contact EHL film thickness. We expect that this technology will give valuable clue to improve color image processing analysis for high resolution of EHL film thickness with white incident light.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.128-135
• /
• 1996

This paper proposes a high precision measurement technique to obtain the height of gage block with a few millimeter height. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, in the second step, heterodyne laser interferometry is adopted to acquire the precision value. A new kind of phase detector is constructed in the low cost for the heterodyne interferometer and its linearity with ${\pm}1%$ is confirmed by experiment. Also measurement error factors due to enviroments are discussed and methodology to reduce such errors is proposed. Preliminary experiments are carried out for the gage blocks of as high as a few millimeter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.287-288
• /
• 2006

This paper introduces an approach of method to compensate accuracy error of diagonal direction. The measurement of squareness error is an important parameter in performance test of two axis Linear Motor and this exerts influence on accuracy error of diagonal test. However, previous knowledge management approaches are limited in deviation measurement of optical axis or restrictive elements of diagonal measurements using laser interferometer. But this proposed method calculated diagonal accuracy error which was occurred by squareness error and compensated squareness error using orthogonal correction method of PMAC. From this result, diagonal accuracy error is significantly reduced. This experimental results show that geometric error of squareness error is easily corrected by dynamic coordinate correction.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.354-358
• /
• 1993

The temperature distribution inside a zigzag slab laser glass was measured using a Mach-Zehnder interferometer. The temperature difference between the center and the surface of the slab caused the fracture of the slab glass. Two laser glasses were fractured at a temperature difference ${\Delta}T_0$of TEX>$110^{\circ}C$, $62^{\circ}C$ respectively. For the design of high-average power glass laser, it is recommended that the limit of the temperature difference ${\Delta}T_0$ inside the slab glass should be smaller than $50^{\circ}C$ for safe operation.ration.