• 한국광학회지
• /
• 제23권3호
• /
• pp.119-123
• /
• 2012

LCD backlight unit (BLU)에서 도광판 상부에 micro reverse-pyramid array (MRPA) 또는 micro reverse-cone array (MRCA)을 설치함으로써 기존의 확산 시트와 프리즘 시트를 없애고 구조를 단순화하였으며, 광학적 시뮬레이션을 통하여 새로운 도광판의 최적 조건을 얻었다. MRPA와 MRCA의 측면각과 높이, 윗변의 반지름이나 윗변의 길이에 따라 휘도와 시야각의 변화를 구하였다. MRPA와 MRCA 구조물의 최적의 형상은 측면각이 각각 59도와 57도이었으며, 시야각은 68도와 64도이었다. 구조물의 높이는 큰 영향을 주지 않았다.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.37-44
• /
• 2014

The use of a laser interferometer as a metrological tool in micro-optics measurement is demonstrated. A transmissive interferometer is effective in measuring an optical specimen having a high angle slope. A configuration that consists of an optical resolution of 0.62 micron is adapted to measure a specimen, which is a micro-Fresnel lens-shaped lenticular lens. The measurement result shows a good repeatability at each fraction of facets, however, a reconstruction of the lens shape profile is disturbed by a known problem of $2{\pi}$-ambiguity. To solve this $2{\pi}$-ambiguity problem, we propose a two-step phase unwrapping method. In the first step, an unwrapped phase map is obtained by using a conventional unwrapping method. Then, a proposed unwrapping method based on the shape modeling is applied to correct the wrongly unwrapped phase. A measured height of each facet is compared with a profile result measured by AFM.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.21-29
• /
• 2016

In this paper, optical tracking and analysis was carried out to find the optical properties with respect to various geometric design parameters of collimator lens which is very efficient when collect the light. As a result, a whole, ellipse incident part can obtain a high light efficiency and a narrow beam angle, and angled cylinder incident part is confirmed to obtain high efficiency and a narrow beam angle at a certain height or more. When Transmission part have a specific surface which can reflect the light in forward direction, a good optical properties was confirmed.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.15-24
• /
• 2021

In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed air, external shock, tool errors, machining conditions (rotational speed and feed rate), tool wear, and vibration. The pressure variation of compressed air causes a form accuracy error with waviness. An external shock causes a ring-shaped surface defect. The installed diamond tool for machining often has height error, feed-direction position error, and radius size error. The types of form accuracy error according to the tool's errors were analyzed by CAD simulation. The surface roughness is dependent on the tool radius, rotational speed, and feed rate. It was confirmed that the surface roughness was significantly affected by tool wear and vibration, and the surface roughness of Rz 0.0105 ㎛ was achieved.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.6-11
• /
• 2009

VA Mode LC를 사용하는 Full-HD급 LCOS 마이크로디스플레이에서 셀 상하 간격의 변화에 따른 전기광학적 특성의 변화에 관하여 3차원 LC code를 이용하여 연구하였다. 5가지의 다른 셀 상하 간격 (1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ 그리고 2.8 ${\mu}m$)의 변화에 따라 Reflectance-Voltage 특성, 반사광 및 반사율 분포, Optical Fill Factor 그리고 명암비를 비교하였다. Surface Anchoring 효과에 의해 상하 간격이 증가하면서 반사율은 증가하였으나 Optical Fill Factor와 명암비를 고려할 경우, 중간 수준의 간격인 2.1 ${\mu}m$ 의 특성이 가장 우수함을 확인할 수 있었다. 동일한 구조를 갖고 있는 0.7 인치 LCOS 패널을 제작하여 광학적 측정을 해 본 결과 시뮬레이션 결과와 통일함을 확인할 수 있었다.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.153-165
• /
• 1995

The design procedure of a GaAs/AlGaAs semiconductor matrix optical switch is presented for a simplified tree architecture in the viewpoint of optical loss. A low loss, 0.537 dB/cm, pin type substrate is designed by considering the loss due to imputity doping at 1.3 $\mu$m wavelength. The operating voltage and the device length of a reversed ${\Delta}{\beta}$ electro-optic directional coupler(EODC) swith which is a cross-point device of the 4${\times}$4 matrix optical switch and the bending loss of rib waveguide are caculated as functions of waveguide parameters and bending parameters. There is an optimum bending radius for some waveguide parameters. It is recommened that higher optical confinement conditions such as wide waveguide width and higher rib-height should be chosen for structural parameters of a low loss and a process insensitive 4${\times}$4 matris optical switch. A 4${\times}$4 optical matrix switch which has a 3 dB loss and a 12 volt operating voltage is designed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.694-699
• /
• 2002

As the demand for slim laptops requires ion'-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method far anti-vibration mechanism with respect to the existing servo gain plot. This method verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.833-839
• /
• 2002

As the demand for slim laptops requires low-height optical disc drives, vibration problems of optical disc drives are of great concern. Additionally, with the decrease of a track width and a depth of focus in high density drives, studies on vibration resonance between mechanical parts become more important. From the vibration point of view, the performance of optical disc drives is closely related with the relative displacement between a disc and an objective lens which is controlled by servo mechanism. In other words, to read and write data properly, the relative displacement between an optical disc and an objective lens should be within a certain limit. The relative displacement is dependent on not only an anti-vibration mechanism design but also servo control capability. Good servo controls can make compensation for poor mechanisms, and vice versa. In a usual development process, robustness of the anti-vibration mechanism is always verified with the servo control of an objective lens. Engineers partially modify servo gain margin in case of a data reading error. This modification cannot correct the data reading error occasionally and the mechanism should be redesigned more robustly. Therefore it is necessary to verify a mechanism with respect to the possible servo gain plot. In this study we propose the experimental verification method for anti-vibration mechanism with respect to the existing servo gain plot. Thismethod verifies axial vibration characteristics of optical disc drives on the basis of transmissibility. Using this method, we verified our mechanism and modified the mechanism for better anti-vibration characteristics.

• 한국광학회지
• /
• 제29권1호
• /
• pp.13-18
• /
• 2018

본 연구에서는 여러 매의 렌즈들로 구성된 광학계의 색수차 보정을 위해 색수차 보정 지도에서 대칭 그래픽 방식을 제시한다. 광학계를 구성하는 렌즈의 공기간격과 매수를 고려하여 대칭 그래픽 방식을 적용하기 위해 각 렌즈에서 근축광선의 상대적인 높이 비와 등가 단일렌즈 개념을 이용한다. 임의의 광학계를 여러 종류의 이중렌즈 광학계들로 변경한 다음, 소재선택과 굴절능재분배를 통해 색수차 보정에 가장 효과적인 이중렌즈를 선택한다. 이러한 설계방법을 가시광선 영역의 어안렌즈 설계에 적용한 결과 색수차가 보정된 광학계를 효과적으로 얻을 수 있었다.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.115-124
• /
• 1999

The interaction of weak normal shock wave with turbulent boundary layer in a supersonic nozzle was investigated experimentally by wall static pressure measurements and by schlieren optical observations. The lime-mean flow in the interaction region was classified into four patterns according to the ratio of the pressure $p_k$ at the first kink point in the pressure distribution of the interaction region to the pressure $p_1$ just upstream of the shock. It is shown for any flow pattern that the wall static pressure rise near the shock foot can be described by the "free interaction" which is defined by Chapman et al. The ratio of the triple point height $h_t$ of the bifurcated shock to the undisturbed boundary layer thickness ${\delta}_1$ upstream of the interaction increases with the upstream Mach number $M_1$, and for a fixed $M_1$, the normalized triple point height $h_t/{\delta}_1$ decreases with increasing ${\delta}_1/h$, where h is the duct half-height.