• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.87-95
• /
• 1995

A commercial DOHC four valve engine was modified to make a single-cylinder optical model engine with replaceable head. Three kinds of head were used to generate swirl, tumble, and combined swirl/tumble motion. Schlieren visualization technique was applied to characterize the in-cylinder flow qualitatively. Particle Image velocimetry has been developed and applied for the quantitative flow measurements. Axial and tangential flow motion inside the cylinder has been characterized. The swirl/tumble port shows beneficial results in terms of turbulence generation for the initial flame propagation and mean swirl motion for the overall flame propagation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.273-276
• /
• 2021

최근의 기계 학습 (딥러닝)은 기존의 전통적인 통계 분석 방법들에 비해 효율성과 정확도가 높은 장점이 있지만, 처리과정이 블랙박스와 같아 결과 값의 중요한 원인 또는 근거 요인을 찾기 어렵다는 단점을 가지고 있다. 이를 해결하기 위한 최근의 XAI (eXplainable AI) 연구를 기반으로 하여, 본 논문에서는 의료기관에서 전정기관의 이상을 판별하기 위해 수작업으로 이루어지고 있는 HIT (head impulse test) 테스트 결과를 자동화하고, 설득력 있는 신뢰도 검정을 위해, XAI 기반 DoWhy 프레임 워크를 사용하였다. 전정기관 이상으로 의심되는 환자의 동공 움직임을 optical flow 로 추적하고, 정상인과의 Wasserstein metric 의 DoWhy 검증을 통해 전정기관 이상 여부의 신뢰도 구간을 검정한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.296-297
• /
• 2003

사회의 정보화가 급속하게 진전됨에 따라 취급해야 할 데이터 양이 증가되면서 정보 저장장치의 고속화, 소형화, 및 대용량화의 필요성이 대두되고 있다. 많은 양의 데이터를 저장하기 위해서는 저장장치의 물리적 디스크 공간이 높은 기록밀도를 가져야 한다. 이를 위한 방법으로 하드디스크 기술과 광자기 디스크 장치(magneto-optical disk drive) 기술을 결합하는 근접장 복합 기록 방법(Near field hybrid recording method)들이 보고 되었다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.702-705
• /
• 2001

This paper deals with a method to predict the flying state of the head slider in a optical disk drive(ODD). The Dual Solver based on the Quasi-Newton method and the Newton method has been developed to simulate the steady-state flying conditions. The numerical results show the effectiveness and reliability of this new solver.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.849-851
• /
• 1995

Magnetic heads on vcr drum are adjusted for protrusion, rotational angle, setting angle between two symmetrically positioned heads and height difference. Developed adjustment system covered assembly spec., namely ${\pm}2{\mu}m$ and ${\pm}30{\mu}m$ in rotational angle by using the image processing to determine head positions and S/W algorithm to compensate mechanical errors.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.865-872
• /
• 2000

This paper presents the modeling, theoretical formulation, and stability analysis for a combined system of a spinning disc and a head that contacts the disc. In the analytic model, head interference is considered by a rotating mass-spring-damper system together with a frictional follower force on the damped annular discs. The multiple scale method is utilized to perform the stability system that shows the existence of instability associated with parametric resonances. Using the formulated system , instability regions of optical recording disc are investigated with variation of mass, stiffness and friction force of a head, respectively. The simulation results show that the stiffness of a head is the most sensitive parameter on the instability of the disc.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.8-15
• /
• 2008

In this paper, in order to analyze property of frequency response in optical microphone, system was implemented. The capacitance microphone and fiber-optic transmission path type fiber-optic microphone (FOM) have weaknesses in directivity, size, weight, and price. However suggested optical microphone can be constituted by cheap devices, so it has many benefits like small size, light weight, high directivity, etc. Head part of optical microphone which is suggested in this paper is movable back and forth by sound pressure with the attached reflection plate. Operating point is determined by measuring the respond characteristics and choosing the point on which has maximum linearity and sensitivity while changing the distance between optical head and vibrating plate. We measured the output of the O/E transformed signal of the optical microphone while frequency of sound signal is changed using sound measurement/analysis program, Smaart Live and USBPre, which are based on PC, and compared the result from an existing capacitance microphone. The measured Optical microphone showed almost similar output characteristics as those of the compared condenser microphone, and its bandwidth performance was about 300[Hz]-3[kHz] at up to 3 [dB].

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.88-95
• /
• 2020

In this study, we present methods to quantitatively analyze and correct the distortions and biocular parallaxes in a head-up display (HUD). To analyze asymmetrical distortions, five kinds of distortions are proposed and evaluated at five eye positions of an eyebox. The differences between distortions evaluated at the four corners of the eyebox and that at the center are defined as the relative distortions, which occur due to head motion of the driver. We also define the convergence and divergence parallaxes at six biocular positions in the eyebox to quantitatively analyze them. Using these analytical methods, we constrain the degree of biocular parallaxes and distortion changes with eye position to be small, so that an optical system nearly free from them can be obtained by optimization design for HUD optics.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.1
• /
• pp.40-47
• /
• 1998

The optical heads as the key parts of digital audio/video players are applied extensively from general household electric appliances to computer memory or game apparatuses, and the demand of them tends to be increased according to the extension of optical medium market. In this paper, the 2-axis actuator, the key component for focus servo and tracking servo of the optical head is designed as a type of the cantilever suspended by 4 wires. The design propriety is verified through its simulation and the characteristic analysis of its mock-ups. The other factors which influence the performance of 2-axis actuators besides the design factors of them, are also verified through the mock-up analysis.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.474-490
• /
• 2017

Since the recent slowdown in the smartphone market, studies for wearable devices are briskly being carried out to find new markets, such as virtual reality devices. In this paper, a head-mounted display (HMD) which provides expanded virtual images before human eyes by enlarging images of a small display was designed, and the tolerance analysis method for a focus-adjustable HMD based on afocal optical systems was studied. There are two types of HMDs: a see-through type that allows the user to view the surroundings, and a see-close type where the user can only view the display screen; the former is used in this study. While designing the system, we allowed a lens within the system to be shifted to adjust its focus from +1 to -4 D (diopters). The yield of the designed systems was calculated by taking the worst-case scenario of a uniform distribution into account. Additionally, a longitudinal aberration was used rather than MTF for the tolerance analysis with respect to system performance. The sensitivity of the designed system was calculated by assigning a certain tolerance, and the focus lens shift was calculated to adjust the image surface variations resulting from the tolerance. The smaller the tolerance, the more expensive the unit price of the products. Very small tolerances may even be impossible to fabricate. Considering this, the appropriate tolerance was assigned; the maximum shift of the focus lens in which the image surface can be adjusted was obtained to find the changes in aberration and a good yield.