• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.23-28
• /
• 2014

In this paper, we discuss on the optimal design scheme of the bilayer OLED (Organic Light Emitting Diodes) with micro-cavity structure. We carried out the optical simulation on the OLED device and calculated optimal scale of devices with taking the micro-cavity effect into account. Our emission model is based upon an ensemble of radiating dipole antennas. Consequently, we applied Maxwell's equation to this sequence, followed by the analysis on the electrical behaviors of OLED device using Poisson's equation. It contains carrier injection and transportation mechanism. In this process, we found out the thickness of each layer can affect the recombination rate at the emission layer. Therefore, we optimized the thickness of each layer to improve the efficiency of the device.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.41-45
• /
• 2016

The Cs₃Sb photocathode was formed by non-vacuum process technology and successive in-situ photocathode vacuum device fabrication carried out in a process chamber. Performance testing of the device was followed. Light emission from the devices was induced by photoemitted electrons, which were accelerated by an anode electric field that was shielded from the photoemitter surface. The luminescent characteristics of the devices were investigated by measuring the optical parameters as functions of the applied anode voltages. The results showed that this approach could produce a more easily directed and controlled stream of light. These features make these devices suitable for a variety of planar lighting applications.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.235-236
• /
• 2008

A configuration of illumination for high-speed color document scanner has been proposed utilizing white light emitting diode and transparent plastic lightguide. The design of illumination system including lightguide for high optical efficiency and uniform image quality is performed based on a simulation using ray-tracing method. The device characteristics are also experimentally evaluated in terms of illumination distribution against longitudinal and transverse direction on document plane. Uniform illumination distribution about 85% of in longitudinal and transverse direction is realized by control of mechanical dimension and position of lightguide.

• 한국광학회지
• /
• 제2권4호
• /
• pp.233-241
• /
• 1991

Structures, fabrication, and characteristics of top-surface-emitting GaAs four quantum well microlaser are described. The microlasers have good room-temperautre CW characteristivs. The maximum CW laser output is >3mW from a 30 $\mu\textrm{m}$ diameter microlaser and the maximum differential quantum efficiency is >70% from a 10 $\mu\textrm{m}$ diameter microlaser. Active surface emitting laser logic devices are designed and fabricated as a discrete version of a top-surface-emitting laser and heterojunction phototransistor. The active surface emitting laser logic device have high optical gain (>20 overall, >200 differential) and very high on/off ratio. Two-dimensional arrays of top-surface-emitting microlasers and active surface emitting laser logic devices will be critical elements for optical computing, photonic switching and neural network applications.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.53-57
• /
• 2001

The organic light-emitting devices (OLEDs) based on fluorescence have low efficiency due to the requirement of spin-symmetry conservation. By using the phosphorescent material, internal quantum efficiency can reach 100%, compared with 25% in the case of the fluorescent material. Thus, phosphorescent OLEDs have recently been extensively studied and shown higher internal quantum efficiency than the conventional OLEDs. In this study, we investigated the characteristics of the phosphorescent OLEDs with the green emitting phosphor, $Ir(ppy)_3$ (tris(2-phenylpyridine)iridium). The device with a structure of ITO/TPD$Ir(ppy)_3$ doped in BCP/BCP/$Alq_3$/Li:Al/Al was fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of $Ir(ppy)_3$, we fabricated several devices and investigated their characteristics.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• Current Photovoltaic Research
• /
• 제2권2호
• /
• pp.41-47
• /
• 2014

Extensive investigation on silicon based thin film reveals a wide range of film characteristics, from low optical gap to high optical gap, from amorphous to micro-crystalline silicon etc. Fabrication of single junction, tandem and triple junction solar cell with suitable materials, indicate that fabrication of solar cell of a relatively moderate efficiency is possible with a better light induced stability. Due to these investigations, various competing materials like wide band gap silicon carbide and silicon oxide, low band gap micro-crystalline silicon and silicon germanium etc were also prepared and applied to the solar cells. Such a multi-junction solar cell can be a technologically promising photo-voltaic device, as the external quantum efficiency of such a cell covers a wider spectral range.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권2호
• /
• pp.37-41
• /
• 2001

In this study, organic electroluminescent devices with the ITO/TPD/Alq$_3$/cathode structure, using various materials of Al, Mg:Ag, Al:Li, MgF$_2$/Al, and LiF/Al as cathodes, were fabricated. We investigated the electrical and optical properties of the devices as follow: current density-voltage(J-V), luminance-voltage(L-V) and luminous efficiency-voltage curves. The bilayer cathodes with LiF/Al and MgF$_2$/Al exhibited better device performance than the other cathodes. It is considered that the improved performance of the organic electroluminescent devices is attributable to the lowering of driving voltage caused by the enhanced electron injection. The alkaline-earth fluorides are desirable materials to improve the performance of the EL devices with the Al cathode, and high luminous efficiency was achieved.

• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.155-160
• /
• 2024

편광 선택적 빔 분리 격자는 수많은 광학 정보처리 시스템에서 널리 사용되고 있다. 본 논문에서는 고효율 플라즈마 편광 빔 분리기 (PBS)를 설계하기 위하여 Littrow 구조에서 Ag 금속 층으로 구성된 소자를 구현하였다. 구현한 PBS는 투과되는 0차 TE 편광과 반사되는 0차 TM 편광에서 높은 회절효율을 달성할 수 있도록 격자깊이 및 격자 비율을 정확한 모드 전송선로 이론 (Modal Transmission-Line Theory)을 사용하여 최적화하였다. 최적화된 결과로부터 PBS는 입사 파장과 각도에 대한 광대역 특성의 장점을 가지고 있으며, TE, TM 편광 모두에 대하여 95% 보다 높은 효율을 나타내었다. 그러므로, 높은 흡광비를 갖는 이 고효율 PBS 광대역 격자는 우수한 광 회절 장치로 사용될 수 있다.