• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2009

White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

• The Optical Journal
• /
• s.149
• /
• pp.11-13
• /
• 2014

우리 협회가 지난 12월 9일 부터 사흘간 'CODE V 및 LightTools를 이용한 광학설계 실습 세미나'를 개최했다. 서울 사당동 소재 한국직업전문학교에서 진행된 이번 세미나는 세코닉스, 해성옵틱스, 디지탈옵틱, 삼양옵틱스 등의 회원사는 물론 삼성디스플레이, 현대모비스, 캐논코리아비즈니스솔루션, LG전자, 카이스트, 광운대학교 등에서 총 30명의 연구원, 학생 등이 수강한 가운데 진행됐다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.114-122
• /
• 2004

In this paper, we proposed an optical encryption and decryption technique that uses a nail bed pattern as a key-code. Since the technique uses a nail bed pattern that is a biometric signal of an encryptor, the technique is robust about a fake key or illegal use of a key. In addition to this, the encrypted image contains the biometric information of the encryptor. This makes the proposed technique also be applied to authentication.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.13-20
• /
• 2004

We propose a new optical code division multiple access (OCDMA) scheme for reducing multiple access interference (MAI) and enhancing performance for optical subscriber access networks using modified pseudorandom noise (PN)-coded fiber Bragg gratings with bipolar OCDMA decoders. Through the bipolar OCDMA decoder and the modified PN codes, MAI among users is effectively depressed. As the data are encoded either by a unipolar signature sequence of the modified PN code or its complement according to whether the data bit is 1 or 0, the bit error ratio (BER) can be more improved with the same signal to interference plus noise ratio over the conventional on-off shift keying-based OCDMA system. We prove by numerical analysis that the BER of the proposed bipolar OCDMA system is better than the conventional unipolar OCDMA system. We also analyze the spectral power distortion effects of the broadband light source.

• Korean Journal of Optics and Photonics
• /
• v.22 no.5
• /
• pp.239-244
• /
• 2011

We introduce Gaussian (or paraxial) optics that can be successfully applied to design, for use in a color analyzer, a non-imaging optical system on a measurement probe for LCD display. The color analyzer is used to decompose colored lights leaving from some measurement area on the LCD display to red, green, and blue. The color analyzer must include a condenser lens whose purpose is to gather colored lights to illuminate a small area on the sensor. In order to satisfy a reduction ratio between the measurement area and the sensing area with a non-imaging condition, a condenser lens is analytically treated by means of Gaussian optics so that good understanding of the non-imaging condenser lens is achieved as a good design is derived. As a result, the technique shows the necessity of analytical treatment in contrast to the design approach using only commercial software such as CODE-V, Light-Tools, and others. Of course, CODE V and Light-Tools are also utilized in this paper to confirm and complete the Gaussian optical design.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.75.2-76
• /
• 2021

MESSIER is a science satellite project to observe the Low Surface Brightness (LSB) sky at UV and optical wavelengths. The wide-field, optical system of MESSIER is optimized minimizing optical aberrations through the use of a Linear Astigmatism Free - Three Mirror System (LAF-TMS) combined with freeform mirrors. One of the key factors in observations of the LSB is the shape and spatial variability of the Point Spread Function (PSF) produced by scatterings and diffraction effects within the optical system and beyond (baffle). To assess the various factors affecting the PSF in this design, we use PhoSim, the Photon simulator, which is a fast photon Monte Carlo code designed to include all these effects, and also atmospheric effects (for ground-based telescopes) and phenomena occurring inside of the sensor. PhoSim provides very realistic simulations results and is suitable for simulations of very weak signals. Before the application to the MESSIER optics system, PhoSim had not been validated for confocal off-axis reflective optics (LAF-TMS). As a verification study for the LAF-TMS design, we apply Phosim sequentially. First, we use a single parabolic mirror system and compare the PSF results of the central field with the results from Zemax, CODE V, and the theoretical Airy pattern. We then test a confocal off-axis Cassegrain system and check PhoSim through cross-validation with CODE V. At the same time, we describe the shapes of the freeform mirrors with XY and Zernike polynomials. Finally, we will analyze the LAF-TMS design for the MESSIER optical system.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.314-319
• /
• 2009

In this paper, the network performance of a turbo coded optical code division multiple access (COMA) system with cross-layer, which is between physical and network layers, concept is analyzed and simulated We consider physical and MAC layers in a cross-layer concept. An intensity-modulated/direct-detection (IM/DD) optical system employing pulse position modulation (PPM) is considered In order to increase the system performance, turbo codes composed of parallel concatenated convolutional codes (PCCCs) is utilized. The network performance is evaluated in terms of bit error probability (BEP). From the simulation results, it is demonstrated that turbo coding offers considerable coding gain with reasonable encoding and decoding complexity. Also, it is confirmed that the performance of such an optical COMA network can be substantially improved by increasing the interleaver length and the number of iterations in the decoding process. The results of this paper can be applied to implement the indoor optical wireless LANs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.712-722
• /
• 2002

We have investigated a novel optical decoder for a fiber-optic code division multiple access(CDMA) communication systems. The conventional optical encoder and decoder have the advantage of simple structure. However the number of users in the system is limited by the auto- and cross-correlation properties generated in decoding process. In previous studies, to improve the system performance, although they used an optical code that minimize the sidelobe and cross-correlation, could not yet find a novel methods for performance improvement in fiber-optic CDMA system. Thus, it is necessary to investigate the novel optical decode in order to improve the performance of system. In this paper, we schematize the AND gate logic element(AGLE) composed with 1$\times$2 or 1$\times$3 coupler and the optical thyristor and propose the novel optical decoder using K(weight) AGLE. The optical thyristor only passes the overlapped signal and clips other signals. Such a novel concept means that the optical thyristor can operate as a hard-limiter. We analyze the fiber-optic CDMA system using the novel optical decoder with simulation and is found that the novel optical decoder using the AGLE and optical thyristor excludes the sidelobe and cross-correlation intensity between any two sequences.

• Nuclear Engineering and Technology
• /
• v.32 no.4
• /
• pp.361-371
• /
• 2000

The 123Te(p,n)123I, 124Te(p,n)124I and 124Te(p,2n)123I reactions, among the many reaction channels opened, are the major reactions under consideration from a diagnostic purpose because reaction residuals as the gamma emitters are used for most radiophamaceutical applications involving radioiodine. Based on the available experimental data, the absorption cross sections and elastic scattering angular distributions of the proton-induced nuclear reaction on Te isotopes below 60 MeV are calculated using the optical model code APMNK. The transmission coefficients of neutron, proton, deuteron, trition and alpha particles are calculated by CUNF code and are fed into the GNASH code. By adjusting level density parameters and the pair correction values of some reaction channels, as well as the composite nucleus state density constants of the pre-equilibrium model, the production cross sections and energy-angle correlated spectra of the secondary light particles, as well as production cross sections and energy distributions of heavy recoils and gamma rays are calculated by the statistical plus pre-equilibrium model code GNASH. The calculated results are analysed and compared with the experimental data taken from the EXFOR. The optimized global optical model parameters give overall agreement with the experimental data over both the entire energy range and all tellurium isotopes.

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.320-328
• /
• 2019

A method for joint-transform correlator (JTC) multiple-image encryption based on a quick-response (QR) code key is proposed. The QR codes converted from different texts are used as key masks to encrypt and decrypt multiple images. Not only can Chinese text and English text be used as key text, but also symbols can be used. With this method, users have no need to transmit the whole key mask; they only need to transmit the text that is used to generate the key. The correlation coefficient is introduced to evaluate the decryption performance of our proposed cryptosystem, and we explore the sensitivity of the key mask and the capability for multiple-image encryption. Robustness analysis is also conducted in this paper. Computer simulations and experimental results verify the correctness of this method.