• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.113-116
• /
• 2002

We demonstrate 16 ch.$\times$2.5 Gb/s WDM transmission over 10,880 km using a re-circulating loop and forward error correction (FEC) code. The performances of all 16 channels were measured to be lower than 10$^{-10}$ .

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.108-114
• /
• 2005

Code V was used to make a plan for collimator lens with aspherical surface in the present study. The acquired optical design data were applied for ultra-precision machining. The optimum properties were determined to find ways to compensate the tool positioning error allowance during the ultra-precision machining. In ultra-precision aspheric machining, figure tolerance corrected by tool positioning error be improved by compensation cycle number.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.67-73
• /
• 1994

The simulation code was developed to analyze the amplification properties of the regenerative amplifier, such as gain narrowing, nonlinear effect, and energy saturation. To reduce gain narrowing in the regenerative amplifier, the input pulse with a symmetrical shape and the same center wavelength of the active medium should be amplified in the active medium with a broad fluorescence linewidth. In this respect, Ti:Sapphire with a low nonlinear refractive index, a high saturation fluence, and a broad fluorescence linewidth is the most appropriate medium for the regenerative amplifier. The knowledge and the important parameters were acquired for the optimum design of the regenerative amplifier.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.64-71
• /
• 1994

In this study, optimizing BPOFs are encoded by Simulated Annealing algorithm that is widely used among the optimization algorithms. Two BPOFs are trained by digit patterns, 0~9, and the digits each having 4 intraclass patterns are multiplexed. When each digit is encoded by four bit binary code, from the results of computer simulation, the correlation pezk is shown at binary value 1 position among the spatially separated four positions at the correlation plane And then, the designed BPOFs are implemented by CGH technique. Through the optical correlation experiment, satisactory results are achieved, inspite of some experimental errors and information loss owing to the amplitude type CGH filter.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.65-69
• /
• 2004

A computer code was developed to simulate the filling stage of the injection/compression molding process by a finite element method. The constitutive equation used here was the compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Simulations of a disk part under different processing conditions including the variation of compression stroke and compression speed were carried out to understand their effects on flow-induced birefringence. The simulated results were also compared with those by conventional injection molding and with experimental data from literature.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.235-240
• /
• 2005

In this paper, vibration suppression of a CD-ROM main base with piezoelectric shunt circuit is studied. Admittance is introduced to predict the performance of piezoelectric shunt damping. Numerical admittance obtained by commercial finite element code, ANSYS, correlates well with experimentally measured one. Multi-mode piezoelectric shunt damping is realized based on the target mode and frequencies obtained by the admittance analysis. Experimental results prove that admittance of the piezoelectric structure is capable of predicting the performance of piezoelectric shunt damping and the vibration of the main base with the piezoelectric patches is reduced effectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.60.2-60.2
• /
• 2014

The dust cloud around ${\lambda}$-Orionis is seen to be circular symmetric with the large angular extent (${\sim}8^{\circ}$). However, whether the three dimensional structure of the cloud is shell or torus ring is not yet fully resolved. We studied the structure of the dust cloud using a three-dimensional Monte-Carlo simulation code, MoCafe (Monte Carlo radiative transfer). The dust density structure of the cloud was inferred based on the star-count method. We assumed that the cloud is a spherical shell or a torus ring and calculated the radial profiles of scattered light originating from a central OB association. Comparison of the results with the S2/68 ultraviolet observations indicates that the cloud is a spherical shell. We also compared the Av map around ${\lambda}$-Orionis with the optical depth obtained based on the star-count.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.28-33
• /
• 2010

A computer code was developed to simulate all three stages of the injection molding process: filling, packing and cooling by finite element method. The constitutive equation used here was compressible Leonov model. The PVT relationship was assumed to follow the Tait equation. The flow-induced birefringence was related to the calculated flow stresses through the linear stress-optical law. Based on the simulation, the Taguchi method was used to investigate the influences of injection molding conditions on the birefringence of a center gate disk. In addition, the optimal processing conditions were selected to minimize the birefringence and the birefringence difference along the positions of the disk.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.489-495
• /
• 2001

We developed a design code for a diode side-pumped Nd:YAG laser with a diffusive reflector to investigate the optimum design conditions resulting in homogeneous absorption distribution and efficient laser output power. By including the thermal tensing effect in the calculation of the laser output power, the calculated output powers were in fairly good agreement with the experimental results within the stable resonator condition. The calculation method can be used effectively for a diode side-pumped Nd:YAG laser in choosing the optimum design parameters and in predicting the laser output power.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.263-272
• /
• 2002

A total of 616 observations (308 in B, 308 in V) to. V523 Cas was made on three nights from October 19 to 21 in 1999 using the 1.8m telescope with 2K CCD camera of the Bohyunsan Optical Astronomy Observatory of KAO. With our data we constructed the BV light curves and determined 4 times of minimum light. We also obtained physical parameters of the system by combined analysis of both light and radial velocity curves using the Wilson-Devinney code.