• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.628-634
• /
• 2005

We have simulated and proposed novel optical cavity, which has two elliptical mirrors, for NDIR gas sensor module and have tested it from 0 ppm to 2,000 ppm $CO_2$ concentration. The proposed sensor module shows the maximum peak voltage at 500 ms pulse modulation time, however, it shows a maximum voltage changes at 200 ms pulse duration with 18,000 times amplification gain. From 0 ppm to 2,000 ppm, the voltage difference of sensor module $({\Delta}V)$ shows 360 mV at 200 ms pulse duration and 3 sec turn-off time. The response time of designed sensor module is about 30 seconds.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1170-1173
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the common system is required. The common systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches, the optical lens. The ultrasonic wave driven system solve these problem. In this paper the object transport system using the excitation of ultrasonic wave is proposed. the experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave generators are performed. The effect of transporting speed according to the change of amplification voltage is verified. In addition, the system performance for actual use is evaluated

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.151-158
• /
• 2005

In the semiconductor and the optical industry, a new transport system which can replace the conventional sliding systems is required. The sliding systems are driven by the magnetic field and conveyer belts. The magnetic field nay damage semiconductor and the contact force may scratch the optical lens. The ultrasonic wave driven system can solve these problems. In this paper, an object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal progressive frequency and the phase-differences between two ultrasonic wave generators are performed. The relationships between transportation speed and the excitation frequency, flexural beam shapes and amplification voltage are investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.371-375
• /
• 2003

In recent years, as the semiconductor and the optical industry grows, the necessity of the transporting system for semiconductor and precision optical lens without damage increases. The transport system using ultrasonic wave is very suitable for this area. In this paper the object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave generators are performed. The effect of transporting speed according to the change of weight and amplification voltage are verified. In addition, the system performance for actual use is evaluated.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.128-137
• /
• 1999

We found the point-spread function (PSF) including the recording and reconstruction systems of the modified triangular interferometer. We also derived the resolutions of the modified and Cochran's triangular interferometers, then the resolutions of both systems for amplification factor, wavelength, and hologram size were found and analyzed. Also, to demonstrate the feasibility of incoherent holography, the formation of an incoherent hologram using a mercury lamp and its optical reconstruction were presented.

• Journal of the Optical Society of Korea
• /
• v.18 no.2
• /
• pp.118-123
• /
• 2014

For multi parameter optimization of Raman Fiber Amplifier (RFA), a simple genetic algorithm is presented in the scenario of a 320 channel Dense Wavelength Division Multiplexed (DWDM) system at channel spacing of 25 GHz. The large average gain (> 22 dB) is observed from optimized RFA with the optimized parameters, such as 39.6 km of Raman length with counter-propagating pumps tuned to 205.5 THz and 211.9 THz at pump powers of 234.3 mW, 677.1 mW respectively. The gain flattening filter (GFF) has also been optimized to further reduce the gain ripple across the frequency range from 190 to 197.975 THz for broadband amplification.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.242-243
• /
• 2001

고출력 펨토초 레이저 기술은 커렌즈 모드록킹 기술, Ti：sapphire 이득매질의 개발, chirped pulse amplification (CPA) 등의 도움으로 1980년대 후반부터 급속히 발전해 왔다. 생성된 펨토초 펄스의 시간적 특성을 정확히 알아내기 위한 방법들도 많이 연구되어 주파수 분해 괌게이팅(FROG)이나 주파수위상 간섭계(SPIDER) 등의 방법들이 기존의 자체상관계를 대체하게 되었다. 극초단 레이저 펄스는 넓은 스펙트럼을 갖고 첨두출력이 높기 때문에 매질이나 광학계를 지나면서 군지연분산, 자체위상변조 등의 효과에 의한 시간적 위상변화가 쉽게 생긴다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.956-959
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the common system is required. The common systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system solve these problem. In this paper the object transport system using the excitation of ultrasonic wave is proposed. The experiments for finding the optimal excitation frequency, finding phase-difference between two ultrasonic wave get orators are performed. The effect of transporting speed according to the change of weight and amplification voltage are verified. In addition, the system performance for actual use is evaluated.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.433-439
• /
• 2005

We have developed a biosensor reading system using a white light source and a color-sensor. To reduce the environmental effect, we used the ratio of specific color intensity to the entire white light intensity. Also we could improve the responsibility of the system by controlling the amplification of the color sensor output.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.37-42
• /
• 1992

Nd:YLF regenerative amplifiers have proved to be reliable source for producing stable short pulses of high repetition rate. We used a convex-concave mirror design to optimize output energy and stability while minimizing the energy density on critical intracavity optical components. The Kd:YLF laser pulse is used as a seed pulse which has pulse width of 40 ps, energy of 100pJ, and wavelength of 1053 nm. The amplifier yields stable 1 mJ pulses at 3.5 kHz repetition rate, and the maximum energy is measured as 5 mJ.