• Journal of the Optical Society of Korea
• /
• 제10권1호
• /
• pp.11-15
• /
• 2006

We have proposed and theoretically verified an optical regenerator using a single semi-reflective semiconductor optical amplifier (SR-SOA). To explain the operation characteristics and the operation condition of the proposed opticalregenerator, the simplified gain model for the SR-SOA is introduced and confirmed by comparing the result of the SOA simulation based on the transfer matrix method (TMM). The simulation results show that both extinction ratio (ER) enhancement and signal amplification can be achieved in the proposed regenerator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.164-164
• /
• 2009

This paper had analyzed property of LED chip which has appropriate distribution and had designed modeling in order to experiment optical property of LED module through simulation. also throughout error value between street light and simulation data, precisive simulation could be inferred. as a consequent, transformation of optical property had henceforth verified the first value of module array.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.16-19
• /
• 2008

In this study, it was investigated about optical simulation in direct-type backlight design. Direct-type backlight has been used high-brightness backlight such as medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26 mm of the distance of two lamps, 4.5 mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5 % in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.65-70
• /
• 2014

This paper presents the simulation and design of an all-optical subtractor using a quantum-dot semiconductor optical amplifier Mach-Zehnder interferometer (QD-SOA MZI) structure consisting of two cascaded switches, the first of which produces the differential bit. Then the second switch produces the borrow bit by using the output of the first switch and the subtrahend data stream. Simulation results were obtained by solving the rate equations of the QD-SOA. The effects of QD-SOA length, peak power and current density have been investigated. The designed gate can operate at speeds of over 250 Gb/s. The simulation results demonstrate a high extinction ratio and a clear and wide-opening eye diagram.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.27-34
• /
• 2015

There has been a critical issue in optical simulation of phosphors in LEDs due to their light-reabsorption properties. To improve the accuracy of optical modeling for a white LED package, we utilized the spectrum data of the phosphor-dispersed encapsulant film instead of the phosphor powder. By measuring white LED packages with green and red phosphors, the maximum difference between simulation and experimental results of a color temperature, a color rendition index number and a color coordinate corresponds to ${\Delta}T=95K$, ${\Delta}Ra=1.7$ and ${\Delta}xy=0.007$, respectively. Based on those results, the proposed method can well explain the change of emission spectra of white LEDs with more than two phosphors which introduce the complex optical phenomena such as absorption, reabsorption, light emission, reflection and scattering, etc.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.162-162
• /
• 2010

In this study, optical analysis for 100W LED safety street lighting was conducted. Experimental research on such single LED was the first undertaken. simulation modeling based on optical properties of single LED has compared single LED product also designed 100W simulation modeling has compared average road illuminance with Korean Industrial Standards for LED safety street lighting(KS C7658:2009). 100W safety street lighting (model: CE180-ST-OS) designed by simulation has been also compared between product and 100W simulation modeling, and error rates have showed average 5.6[%]. Designed 100W LED safety street lighting base on simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100W LED safety street lamp had reasonable performance. Design method for LED safety Street lamps have been summarized, based on the optical analysis.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.67-71
• /
• 2012

The optical properties of PDP, such as the transmittance and reflectance, were analyzed with 3D optical code. Three different ITO-less structures in the front panel are examined. In the assembled panel study, the test 1 structure shows 16.6% and 10.2% higher reflectance than the structures of tests 2 and 3, respectively. In order to check the validation of the simulation result, three 7.5-inch test panels having the same geometry and property are fabricated as simulation models. The calculated reflective properties are compared to the measured data from real panels. The relative difference extracted from the simulation and measurement methods is less than 4.9% and are well matched.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.195-199
• /
• 2006

We report a novel simulation method to calculate optical transmission considering the real paths of optic introduced in a unit pixel of TFT-LCDs using three-dimensional molecular director simulation of the tensor model. The simulation of optical path transmission profile was carried out by calculating new permittivity considered the real paths of optic in liquid crystal cell. As a result, it was clarified that the electro-optic characteristics such as movement of disclination line, contrast ratio and transmittance profile show a large difference according to the viewing angle compared with the conventional method.

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.551-558
• /
• 2016

In multifiber all-optical networks, optical amplifiers are used for amplifying multiple optical signals with different wavelengths in fibers. An optical amplifier operates when any of lightpaths passes through it. Therefore, it should simultaneously amplify as many lightpaths as possible for efficiently utilizing its power. This paper proposes a dynamic lightpath establishment scheme considering the use efficiency of the optical amplifiers and the depletion of the wavelength resources in multifiber all-optical networks. The proposed scheme provides a routing and wavelength assignment strategy that reduces both the power consumption of the optical amplifiers and the blocking probability of the lightpath establishment. Through simulation experiments, we demonstrate the effectiveness of the proposed scheme.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.370-376
• /
• 2012

In this work, design considerations for high-performance silicon photodetector are thoroughly investi- gated. Besides the critical dimensions of device, guidelines for process architecture are suggested. Abiding by those criteria for improving both direct-current (DC) and alternating-current (AC) perfor- mances, a high-speed low-operation power silicon photodetector based on p-i-n structure for optical interconnect has been designed by device simulation. An $f_{-3dB}$ of 80 GHz at an operating voltage of 1 V was obtained.