• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.1-6
• /
• 2012

This study is focused on simulation technology in injection molding process for plastic optic lenses. The CAE program, $3D-TIMON^{TM}$ is used for the injection molding simulation with O-PET resin material. The design for different gate shape and runner layout has been under review by CAE simulation results. Moreover, the prediction of birefringence and polarized light in injection molded optic lenses has been tested by the CAE Program. The simulation results have been expected to effectively use in the design of injection molding mould.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.195-199
• /
• 2006

We report a novel simulation method to calculate optical transmission considering the real paths of optic introduced in a unit pixel of TFT-LCDs using three-dimensional molecular director simulation of the tensor model. The simulation of optical path transmission profile was carried out by calculating new permittivity considered the real paths of optic in liquid crystal cell. As a result, it was clarified that the electro-optic characteristics such as movement of disclination line, contrast ratio and transmittance profile show a large difference according to the viewing angle compared with the conventional method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1149-1152
• /
• 1996

Recently visual servo control is an important feature of an intelligent robot system. In this paper, we presents a Kalman filter approach for estimation of the linear optic flow model which is utilized in the visual servoing of a mobile robot. The proposed method is also compared with the conventional least mean square method via computer simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.651-652
• /
• 2013

• Journal of the Optical Society of Korea
• /
• 제11권2호
• /
• pp.55-58
• /
• 2007

We propose a systematic method for design of fiber-optic surface plasmon resonance (SPR) sensors. We used rigorous coupled wave analysis (RCWA) for analysis of the transmission spectrum, and the (1+1) evolution strategy (ES) was employed as an optimization tool. The simulation results show that the optimization method presented here is very useful in designing fiber-optic SPR sensor for strain and temperature measurement. This algorithm can be extended to another objective function with other weighting factors and optical parameters.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.231-240
• /
• 1999

The most important thing to be considered in designing stop lamps for automobiles is to satisfy the photometric requirement in various countries and achieve the equal image. To meet these requirements, parabolic reflector and fish-eye optics has been widely applied. The form of the embodied optic is most important in satisfying the photometric requirement and achieving the equal image because the impact of fish-eye optic is decisive. In this study, a series of researches has been performed to optimize of the fish-eye optic by analyzing beam pattern through the photometric simulation based on CATAI program. The optimized results have been shown to meet the various photometric requirements including non dazzling condition considering the following car. The methodology of this study is excepted to influence the development procedure of light system. The time and cost for the system development would be greatly saved by suing this simulaion technique.

• 소음진동
• /
• 제9권3호
• /
• pp.565-569
• /
• 1999

Recently, fiber optic hydrophone is a subject which has attracted as a underwater acoustic sensor. In this study, Finite element modeling of fiber optic hydrophone for hollow cylindrical mandrel was performed and the acoustic sensitivity was calculated to estimate the performance of single element fiber optic hydrophone. And acoustic sensitivity was measured in acoustic water tank to verify the result of simulation. The result of FE analysis and experiment is -126 dB re rad/$\mu$ Pa and -128 dB re rad/$\mu$ Pa respectively.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.93-98
• /
• 2000

자기 광학 공간 광 변조기의 화소의 자화를 반전시키기 위하여 사용하는 드라이브 라인의 형상을 컴퓨터 시뮬레이션을 통하여 설계하고, 연자성막을 도입함으로써 화소 반전에 필요한 최소 전류와 소비 전력을 기존의 드라이브 라인에 비하여 약 3배 감소시킬 수 있었으며, 드라이브 라인을 묻지 않고, 화소를 덮는 반사막(드라이브 라인)의 면적을 크게 하여 광효율을 2.2배 증가시키고, 제조공정을 대폭 단순화시킬 수 있는 드라이브 라인의 형상을 제시했다.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.789-797
• /
• 2009

자이로의 불감응영역은 외부 회전이 인가되고 있음에도 불구하고 이를 감지하지 못하는 영역을 말한다. 본 논문에서는 모델링/시뮬레이션을 이용하여 불감응영역의 원인을 분석하고 불감응영역을 제거하기 위해 디지털 펄스 디더링 기법을 도입하였다. 900m 광섬유를 적용한 3축 자이로 시스템으로 시험한 결과, 디더 진폭, 주파수, 그리고 자이로 루프이득의 조합에 의해 불감응영역이 효과적으로 제거될 수 있음을 확인하였다.

• 한국광학회지
• /
• 제5권4호
• /
• pp.493-498
• /
• 1994

광섬유 지연선로에 Cr/Au 박막을 증착하여 완전 광 슬라티드 링 통신망의 광 패킷 어드레스 검출기용 광섬유 정합 여파기를 제작하였다. 2.5Gb/s급 6-bit 어드레스 코드들에 대한 상관 파형을 시뮬레이션으로 얻었으며 측정된 상관 출력과 일치된 결과를 보였다.