• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.317-323
• /
• 2022

In this investigation, we describe a chromatic confocal sensor based on a geometric phase lens for measuring the thicknesses of transparent plates. In order to design a compact sensor, a geometric phase lens, which has diffractive and polarizing characteristics, is used as a device to generate chromatic aberration, and a fiber optic module is adopted. The systematic error of the sensor is reduced with wavelength peak detection by Gaussian curve fitting and the common error compensation obtained by the repeatedly consecutive experimental results. An approach to calculate the plate thickness is derived and verified with sapphire and BK7 plates. Because of the simple and compact design of the proposed sensor with rapid measurement capability, it is expected to be widely used in thickness measurements of transparent plates as an alternative to traditional approaches.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.159-162
• /
• 2010

There are some limitations to advance technology glaring and luminous Intensity uniformity known as the weak point of existing LED lamp. To improve the two weak points, there have been no special alternative methods so far. Instead, one method which is being used such as the twisting secondary lens or arbitrary structure to remove glaring and improve luminous Intensity uniformity. Based on this academic background, it is necessary to be examined on Technology of Optical System to solve the two weak points by using not complicated but simple methods. This paper will examine the angle of reflection in order to improve luminous intensity uniformity. Also, this research will present the method using lighting analysis program to verify a hypothesis. Through the analysis program, we could understand the simulation analysis method and got some problems about the analysis result. After analysis of causes through reinterpretation of problems, we have reached a conclusion that was changed according to reflectivity and the shape of aspherics by main cause which effected luminous Intensity uniformity and glaring.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.107.2-107.2
• /
• 2014

다양한 산업분야에서의 급격한 Packing Density 증가 추세로 인하여 영상분석기기 분야도 기술적으로 매우 진보되어왔다. 특히 전자현미경(SEM : Scanning Electron Microscope)은 반도체, 디스플레이 및 부품 소재의 고집적화와 더불어 기술의 발전 속도가 빠르게 이루어지고 있으며, 매우 고도화 되고 있다. 이에 따른 다양한 응용분야에서 전자현미경의 수요도 꾸준히 증가되고 있는 추세이다. 그러나 기초 과학기술을 기반으로 하는 전자현미경 산업분야는 높아진 국내 수요대비 자체 기술 발전이 미약한 실정이다. 이러한 현실속에서 국내 기술력으로 FE-SEM을 개발하였고 상용화를 눈앞에 두고 있다. 국산화된 FE-SEM은 Outer Lens방식으로 Schottky cathode와 60o conical Lens를 적용하여 고분해능을 구현함과 동시에 Scan generator, Auto-stepping및 Retarding 기능들도 추가 장착하여 제품경쟁력을 극대화 하고자 하였다. 본 발표는 개발된 FE-SEM의 기술적 특징과 개발 과정 및 결과를 소개하고자 하였다. 또한 해외 경쟁사들의 선행 기술동향 대비 현재 국내 기술 수준을 비교하여 향후 나아갈 방향을 고찰하고자 하였으며, 이를 기반으로 진행 중에 있는 초 저-가속전압 및 Semi In-Lens Optic구현을 위한 국내 기술개발 추진 현황도 간략하게 논하고자 한다. 이러한 고찰을 통하여 해외 선진 경쟁사 대비 후 발업체로써 낙후되어있는 국내기술의 격차를 빠르게 좁혀 나아가고 Global 경쟁력을 갖춘 제품을 구현하기 위하여 국내 전문가들과의 협력을 통한 선행 요소기술 및 차별화된 제품기술 확보 방법을 강구하고자 한다.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.3-7
• /
• 2006

Confocal scanning microscopy is a measurement technique used to observe micrometer and sub-micrometer features due to its high resolution, nondestructive properties, and 3D surface profiling capabilities. The design, implementation, and performance test of a confocal scanning microscopy system are presented in this paper. A short-wavelength laser (405 nm) and an objective lens with a high numerical aperture (0.95) were used to achieve the desired high resolution, while the x- and y-axis scans were implemented using an acousto-optic deflector and galvanomirror, respectively. An objective lens with a piezo-actuator was used to scan the z-axis. A spatial resolution of less than 138 nm was achieved, along with successful 3D surface reconstructions.

• Development and Reproduction
• /
• v.16 no.2
• /
• pp.101-106
• /
• 2012

Importance of behavior factors or environmental factors in visual organization and visual function of fish is treated with great care in visual ecology, and there is no study about initial ocular growth and development on the dark banded rockfish, Sebastes inermis. Thus, this study was performed. The total length, head length, head depth, eye diameter and lens diameter of the dark banded rockfish showed positive allometric relationship between parturition stage and 60 days post-parturition (dpp). The increase in total length relative to head length and head depth, head length growth relative to eye diameter and lens diameter, and head depth growth relative to eye and lens diameter were nearly isometric. The eyes were formed completely at parturtion stage. At this age, the eye has an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer and an epithelial layer. Thickness of retina at 60 dpp was higher than that of at parturition stage. During this experiment, the proportion of the rod and cone layer, outer nuclear layer, and optic nerve fiber layer of retina were significantly increased, while the proportion of the outer plexiform layer, inner nuclear layer and ganglion cell layer of retina were significantly decreased (P<0.05). The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.21-23
• /
• 2004

We report experimental results demonstrating a novel metal defined polymer optical waveguide with a low loss in electro-optic polymers for the first time. The polymer optical waveguides are created using a metal film on the top of upper cladding without any conventional etching process. The fabricated waveguides have an excellent lateral optical mode confinement at both 1.31 ${\square}m$ and 1.55 ${\square}m$ wavelength, resulting in a fiber-to lens optical insertion loss of ~ 7 dB at 1.55 ${\square}m$ and ~4.5 dB at 1.31 ${\square}m$ wavelength in a 3.5cm total length for TM polarizations, respectively. We also present the optical loss dependence of the waveguide as a function of optical wavelengths. These results may be used in the complex design of integrated polymer optical circuits that need simpler and cheaper fabrication process.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.295-303
• /
• 2017

In this paper, we have studied a method of forming a line beam using a UV LED. The existing linear-type UV LED curing optical system is composed of several cylindrical lenses, but problems such as optical system alignment, enlargement of the module, efficiency, etc. may arise in the future. As an alternative to these problems, a bar-type TIR lens having a freeform surface only in the y-axis direction is designed, to verify that it shows advantages in maximum illuminance, uniformity of illuminance, and flux efficiency.

• Development and Reproduction
• /
• v.10 no.2
• /
• pp.93-96
• /
• 2006

The total length, head length, head height, eye diameter, retina thickness, and lens diameter of the dotted gizzard shad, Konosirus punctatus, showed positive allometric relationships between hatching and 30 days post-hatching (dph). The increase in total length relative to head length and head height, head length growth relative to eye and lens diameter, head height growth relative to eye diameter and lens diameter, and thickness of the retina relative to eye diameter, lens diameter, head length, and head height were showed allometric relationships. The eyes were formed completely at 9 dph. At this age, the eye has a lens, an optic nerve fiber layer, a ganglion cell layer, an inner plexiform layer, an inner nuclear layer, an outer plexiform layer, an outer nuclear layer, an outer limiting membrane, a rod and cone layer, and an epithelial layer. The essential demands that must be met by the retina in this species pertain to light sensitivity and spatial resolution.

• Journal of the Optical Society of Korea
• /
• v.7 no.4
• /
• pp.224-229
• /
• 2003

We report a novel optical delay line that can be implemented using only optical fiber and fiber devices without the need for any bulk-optic devices such as lens, prism, and moving mirror. The dispersive property of a chirped fiber Bragg grating (CFBG) is exploited to get the delay. The proposed delay line constitutes two identical CFBGs cascaded in the reverse order with one of them being strained. Analysis reveals that the small displacement or the strain applied on the CFBG is effectively amplified in the delay line by the ratio of the minimum resonant wavelength and the reflection bandwidth of the CFBG. The dispersion properties of the CFBG with and without the strain are analyzed in detail. The theoretical performance of the proposed delay line is also discussed. Applications of the proposed delay line are expected in the field of high-speed optical coherence tomograpy.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1561-1563
• /
• 2001

In this paper, an novel optical measuring system based on the electro-optic effect has been proposed and realized using Pockels cell with a view to detecting partial discharge taking place at the needle plane electrode. This system has the following advantages ; nonmetallic probe sensor, immune to external EMI noise and broad band response of the Pockels cell from DC to GHz. And also it is constructed by He-Ne laser, optical fiber, $LiNbO_3$ Pockels cell, photo detector, grin lens, oscilloscope and PC. The characteristics of the developed prototype sensor are investigated under AC and corona discharges.