• 통합자연과학논문집
• /
• 제9권4호
• /
• pp.249-254
• /
• 2016

This study evaluated the physical and optical characteristics of hydrophilic ophthalmic polymer with addition of 2-methacryloyloxyethyl phosphorylcholine in the basic hydrogel ophthalmic lens material, and in particular, the utility of 2-methacryloyloxyethyl phosphorylcholine as an ophthalmic contact lens material for ophthalmologic devices was investigated. In this study 2-methacryloyloxyethyl phosphorylcholine were used as additives. For the preparation of hydrogel lens 2-hydroxyethyl methacrylate, methyl methacrylate, acrylic acid and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The physical properties of the produced polymers were measured as followings. The refractive index of 1.433~1.393, water content of 35.95~53.16%, contact angle of $70.6{\sim}51.24^{\circ}$, UVB transmittance of 81.2~82.4%, UV-B transmittance of 81.2~82.4% and visible transmittance of 91.4~92.2% were obtained. Also, in case of protein absorption, the measurement showed that absorbance of Reference and MPC-10 sample was 0.2598 and 0.2250 respectively. Based on the results of this study, ophthalmic lens material containing 2-methacryloyloxyethyl phosphorylcholine is expected to be used usefully as a material for high wettability and inhibitor of protein adsorption for ophthalmic hydrogel lens.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2227-2232
• /
• 2009

Novel polythiol materials of urethane lens series for plastic optical lens were synthesized from polyol materials via thioisouronium of thiourea with c-HCl in refluxing aqueous solution, in which polythiol material was carried out from hydrolysis of thioisouronium by ammonia water. Their structure properties were identified by EA, EI-MS, FT-IR, $^1H\;and\;^{13}C$ NMR spectroscopies and TGA. Their ophthalmic lenses as polythiourethane material were prepared by thermal curing to an injected glass mold using the evenly solutions of diisocyanates series (TDI, XDI, HDI or IPDI) with polythiols. Polythiourethane shows that the strong stretching mode for SH group of polythiol disappeared in FT-IR spectra after thermosetting polymerization. Thermal deformation starting temperature of ophthalmic lenses was determined by TMA. Ophthalmic lenses made from characteristic polythiol and diisocyanate series have transparency, colorless and good impact strength, in which thermal resistance and impact strength of ophthalmic lenses were influenced by diisocyanate series. Physical properties of ophthalmic lens have contrast thermal resistance with impact strength. The property of thermal resistance and impact strength for respective ophthalmic lenses was examined by TMA and drop ball test.

• 대한화학회지
• /
• 제53권3호
• /
• pp.391-394
• /
• 2009

• 한국안광학회지
• /
• 제11권2호
• /
• pp.143-149
• /
• 2006

본 연구의 목적은 콘택트렌즈의 재료로 사용되는 실리콘 고분자를 합성하여 실리콘 재질의 가스 투과성 콘택트렌즈의 함수율과 광 투과성의 문제를 해결하는 데에 있다. 실험에 사용된 monomer들로는 NVP(N-vinly-pyrrolidone), MMA(methyl methacrylate), HEMA(Hydroxyethylmethacrylate)등과 교차결합제로 EGDMA(Ethylene Glycol Dimethacrylate)를 사용하였으며, 또한 콘택트렌즈 제조의 가장 좋은 조건을 위한 많은 조합 공식을 토대로 중합한 후, 중합된 개체를 가지고 함수율 측정과 광투과율 측정을 실시하였다. 본 실험의 연구 결과 재질의 투명성과 함수율을 동시에 추구하는 고분자를 합성하였고 그들의 물성을 측정하였다.

• 통합자연과학논문집
• /
• 제6권2호
• /
• pp.76-81
• /
• 2013

ZnO nanoparticles and vinyl pyridine were added to the mixture of MMA (methyl methacrylate), HEMA (2-hydroxy ethyl methacrylate) and NVP (N-vinylpyrrolidone) in a mould at various concentrations. Cross-linker EGDMA (ethyleneglycoldimethacrylate) and AIBN (azobisisobutyronitrile) initiator were finally added to the mixture and then heated at $80^{\circ}C$ for 60 min to prepare high-performance hydrogel ophthalmic lens. The physical properties of the hydrogel ophthalmic material were investigated by measuring the average value of refractive index, water content and optical transmittance. The refractive index of 1.429~1.450, water content of 34~41%, and visible transmittance of 78~90% were obtained. The material is possibly used to manufacture UV-block hydrogel contact lens.

• 대한화학회지
• /
• 제53권3호
• /
• pp.335-339
• /
• 2009

2-Hydroxyethyl methacrylate를 PDMS (polydimethylsiloxane)와 반응시켜methacrylate 말단기를 가진 PDMS prepolymer를 합성하였으며, 탄성 및 유연성을 증가시키기 위하여 AIBN 개시제를 사용하여 BMA(butyl methacrylate)와 공중합시켰다. 얻어진 공중합체의 함수율은 23%로 나타났으며, 가시광선 투과율은 83%, 산소투과율은 50 Dk/t 이상이었다. 이 중합체는 우수한 콘택트렌즈 재료로서의 특성을 보였다.

• 대한화학회지
• /
• 제58권2호
• /
• pp.221-226
• /
• 2014

• 한국재료학회지
• /
• 제29권12호
• /
• pp.735-740
• /
• 2019

The purpose of this study is to fabricate an ophthalmic lens by copolymerizing two types of carbon nanotubes and hydrophilic hydrogel lens materials, and to investigate its application as an ophthalmic lens material by analyzing its physical properties and antimicrobial effect. For polymerization, HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate), a crosslinking agent, and AIBN (azobisisobutyronitrile), an initiator, are used as a basic combination, and a single-walled carbon nanotube and a single-walled, carboxylic-acid-functionalized carbon nanotube are used as additives. To analyze the physical properties, the water content, refractive index, breaking strength, and antimicrobial effect of the fabricated lenses are measured. The fabricated lenses satisfies all the basic properties of the basic hydrogel ophthalmic lens. The water content increases with increasing amount of additive and decreases with addition of 0.2 % ratio of nanoparticles. The refractive index is inversely proportional to the water content result. As a result of the antimicrobial test of the fabricated lens, the addition of carbon nanotubes shows an excellent antimicrobial effect. Therefore, it is considered that the fabricated lens can be applied as a functional material for basic ophthalmic hydrogel lenses.

• 통합자연과학논문집
• /
• 제9권1호
• /
• pp.16-22
• /
• 2016

The optical and physical and characteristics of hydrogel ophthalmic lens polymerized with addition of 2,6-difluoropyridine, SiPc(silicon 2,9,16,23-tetra-tert-butyl-29H31H-phthalocyanine dihydroxide) and nanodiamond in the basic hydrogel material were evaluated. In particular, the utility of 2,6-difluoropyridine, SiPc and nanodiamond as a hydrogel ophthalmic lens material was investigated. 2,6-difluoropyridine, SiPc and nanodiamond were used as additives. And also, 2-hydroxyethyl methacrylate, acrylic acid, methyl methacrylate and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The refractive index of 1.4348~1.4361, water content of 33.30~34.02%, UV-B transmittance of 4.77~67.50%, UV-A transmittance of 1.45~89.19% and visible transmittance of 32.12~92.21% were obtained. The results of hydrogel lens containing 2,6-difluoropyridine (add 5%) showed antibiosis for staphylococcus aureus. The produced copolymer is suitable for hydrogel soft ophthalmic lenses with antibiotic and anti-UV effect.

• 한국안광학회지
• /
• 제1권1호
• /
• pp.65-72
• /
• 1996

플라스틱 안경렌즈의 소재에 관한 일반적인 특성을, 광학적 특성과 polymer의 구조관련시켜 설명함으로써 그 본질적인 부분에 대한 해설을 하였다. PMMA의 경우 ${\delta}$ 전자에 기반을 둔 1중결합에 의해 폴리머의 골격이 유지되고 이들에 의한 빛의 흡수현상은 매우 적은 것이었다, 폴리머의 굴절율은 주로 분자굴절, 분극율에 의해 지배되었고, Cl, Br, I 같은 할로겐기나 벤젠고리를 함유한 경우 굴절율이 높았다. 굴절율의 온도의존성은 무기그라스보다 환경의존성은 컸고, 폴리머내에서의 산란은 결정영역의 불균일한 분포와 관계가 있었다.