• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.345-349
• /
• 2005

Massive amount of satellite image processing such asglobal/continental-level analysis and monitoring requires automated and speedy georegistration. There could be two major automated approaches: (1) rigid mathematical modeling using sensor model and ephemeris data; (2) heuristic co-registration approach with respect to existing reference image. In case of ETM+, the accuracy of the first approach is known as RMSE 250m, which is far below requested accuracy level for most of satellite image processing. On the other hands, the second approach is to find identical points between new image and reference image and use heuristic regression model for registration. The latter shows better accuracy but has problems with expensive computation. To improve efficiency of the coregistration approach, the author proposed a pre-qualified matching algorithm which is composed of feature extraction with canny operator and area matching algorithm with correlation coefficient. Throughout the pre-qualification approach, the computation time was significantly improved and make the registration accuracy is improved. A prototype was implemented and tested with the proposed algorithm. The performance test of 14 TM/ETM+ images in the U.S. showed: (1) average RMSE error of the approach was 0.47 dependent upon terrain and features; (2) the number average matching points were over 15,000; (3) the time complexity was 12 min per image with 3.2GHz Intel Pentium 4 and 1G Ram.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.246-259
• /
• 2008

This study was to minimize the trial and error in the primary step of the C4I system(ATCIS) of the each army corps on the front line, and test the economy and efficiency was tested by reviewing related papers and the system characteristics of other countries. The relationship was researched by analyzing the collected survey data and survey data related to the user's requirement level such as the army standards, that is, commonality, timeliness, simplification, automaticity, field availability and viability, multi-stage security and interoperability, unification. The result showed that the C4I system was efficiently operated through the system reliability for the specification of the system and operation manual, maneuverability and security, adaptability of the war field and system support and management, and good education and training about system operation, and less system maintenance and supplementary element. As a result, the development plan confirmed that the continuous operator education and the construction of the maintenance, and the upgrade digitalization(C4ISR+D) with the korean characteristics based on IT of network systems, and system development of the measurement model of the operator performance must be continuously supplemented in the near future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.12-22
• /
• 2021

This article suggests the machine learning model, i.e., classifier, for predicting the production quality of free-machining 303-series stainless steel(STS303) small rolling wire rods according to the operating condition of the manufacturing process. For the development of the classifier, manufacturing data for 37 operating variables were collected from the manufacturing execution system(MES) of Company S, and the 12 types of derived variables were generated based on literature review and interviews with field experts. This research was performed with data preprocessing, exploratory data analysis, feature selection, machine learning modeling, and the evaluation of alternative models. In the preprocessing stage, missing values and outliers are removed, and oversampling using SMOTE(Synthetic oversampling technique) to resolve data imbalance. Features are selected by variable importance of LASSO(Least absolute shrinkage and selection operator) regression, extreme gradient boosting(XGBoost), and random forest models. Finally, logistic regression, support vector machine(SVM), random forest, and XGBoost are developed as a classifier to predict the adequate or defective products with new operating conditions. The optimal hyper-parameters for each model are investigated by the grid search and random search methods based on k-fold cross-validation. As a result of the experiment, XGBoost showed relatively high predictive performance compared to other models with an accuracy of 0.9929, specificity of 0.9372, F₁-score of 0.9963, and logarithmic loss of 0.0209. The classifier developed in this study is expected to improve productivity by enabling effective management of the manufacturing process for the STS303 small rolling wire rods.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.705-713
• /
• 2018

High-speed rail (HSR) has been in operation and development in many countries worldwide. The explosive growth of HSR has posed great challenges for operation safety and ride comfort. Among various technological demands on high-speed trains, vibration is an inevitable problem caused by rail/wheel imperfections, vehicle dynamics, and aerodynamic instability. Ride comfort is a key factor in evaluating the operational performance of high-speed trains. In this study, online monitoring data have been acquired from an in-service high-speed train for condition assessment. The measured dynamic response signals at the floor level of a train cabin are processed by the Sperling operator, in which the ride comfort index sequence is used to identify the train's operation condition. In addition, a novel technique that incorporates salient features of Bayesian inference and time series analysis is proposed for outlier detection and change detection. The Bayesian forecasting approach enables the prediction of conditional probabilities. By integrating the Bayesian forecasting approach with time series analysis, one-step forecasting probability density functions (PDFs) can be obtained before proceeding to the next observation. The change detection is conducted by comparing the current model and the alternative model (whose mean value is shifted by a prescribed offset) to determine which one can well fit the actual observation. When the comparison results indicate that the alternative model performs better, then a potential change is detected. If the current observation is a potential outlier or change, Bayes factor and cumulative Bayes factor are derived for further identification. A significant change, if identified, implies that there is a great alteration in the train operation performance due to defects. In this study, two illustrative cases are provided to demonstrate the performance of the proposed method for condition assessment of high-speed trains.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.62-68
• /
• 2023

An aerial relay system utilizing an unmanned aerial vehicle(UAV) or drone is addressed for event-driven operations such as temporary communication services for disaster affected area, military and first responder support. UAV relay system (URS) targets to provide a reliable communication service to a remote user equipment or an operator, therefore, a fast UAV placement to guarantee a minimum quality of service(QoS) is important when an operation is requested. Researches on UAV utilization in communication systems mostly target to derive the optimal position of UAV to maximize the performance, however, fast deployment of UAV is much more important than optimal placement under emergency situations. To this end, this paper derives the feasible area for UAV placement, investigates the effect of performance requirements on that area, and suggests UAV placement to certainly guarantee the performance requirements. Simulation results demonstrate that the feasible area derived in this paper matches that obtained by an exhaustive search.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.1-14
• /
• 2008

Recently, because of the need to wide-area spatial data for spatlal analysis and military purpose, there are increasing demand for the efficient retrieval of mass spatial data in Geographic Information System(GIS) fields. Oracle Spatial and ESRI ArcSDE, that are GIS Software, are to manage mass spatial data stably and to support various services but they are inefficient to retrieve mass spatial data because of the complexity of their spatial data models and spatial operations. Therefore, in this paper, we developed a spatial middleware that can retrieve mass spatial data efficiently. The spatial middleware used Oracle which is a representative commercial DBMS as a repository for the stable management of spatial data and utilized OCCI(Oracle C++ Call Interface) for the efficient access of mass spatial data in Oracle. In addition, various spatial operating methods and the Array Fetch method were used in the spatial middleware to perform efficient spatial operations and retrieval of mass spatial data in Oracle, respectively. Finally, by comparing the spatial middleware with Oracle Spatial and ESRI ArcSDE through the performance evaluation, we proved its excellent retrieval and storage performance of mass spatial data.

• Journal of Broadcast Engineering
• /
• v.27 no.6
• /
• pp.936-939
• /
• 2022

As air combat system technologies developed in recent years, the development of air defense systems is required. In the operating concept of the anti-aircraft defense system, selecting an appropriate armament for the target is one of the system's capabilities in efficiently responding to threats using limited anti-aircraft power. Much of the flying threat identification relies on the operator's visual identification. However, there are many limitations in visually discriminating a flying object maneuvering high speed from a distance. In addition, as the demand for unmanned and intelligent weapon systems on the modern battlefield increases, it is essential to develop a technology that automatically identifies and classifies the aircraft instead of the operator's visual identification. Although some examples of weapon system identification with deep learning-based models by collecting video data for tanks and warships have been presented, aerial vehicle identification is still lacking. Therefore, in this paper, we present a model for classifying fighters, helicopters, and drones using a convolutional neural network model and analyze the performance of the presented model.

• Journal of Sleep Medicine
• /
• v.15 no.2
• /
• pp.48-54
• /
• 2018

Objectives: The aim of this study was to develop a predicting model for the optimal continuous positive airway pressure (CPAP) for obstructive sleep apnea (OSA) patient with obesity by using a machine learning. Methods: We retrospectively investigated the medical records of 162 OSA patients who had obesity [body mass index (BMI) ≥ 25] and undertaken successful CPAP titration study. We divided the data to a training set (90%) and a test set (10%), randomly. We made a random forest model and a least absolute shrinkage and selection operator (lasso) regression model to predict the optimal pressure by using the training set, and then applied our models and previous reported equations to the test set. To compare the fitness of each models, we used a correlation coefficient (CC) and a mean absolute error (MAE). Results: The random forest model showed the best performance {CC 0.78 [95% confidence interval (CI) 0.43-0.93], MAE 1.20}. The lasso regression model also showed the improved result [CC 0.78 (95% CI 0.42-0.93), MAE 1.26] compared to the Hoffstein equation [CC 0.68 (95% CI 0.23-0.89), MAE 1.34] and the Choi's equation [CC 0.72 (95% CI 0.30-0.90), MAE 1.40]. Conclusions: Our random forest model and lasso model ($26.213+0.084{\times}BMI+0.004{\times}$apnea-hypopnea index+$0.004{\times}oxygen$ desaturation index-$0.215{\times}mean$ oxygen saturation) showed the improved performance compared to the previous reported equations. The further study for other subgroup or phenotype of OSA is required.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.2
• /
• pp.25-31
• /
• 2020

Purpose: The AEO (Authorized Economic Operator) program, created in 2001 in the United States due to 9.11 terrorist's attack, fundamentally changed the trade environment. Korea, which introduced AEO program in 2009, has become one of the world's top countries in the program by ranking 6th in the number of AEO certified companies and the world's No. 1 in MRA (Mutual Recognition Agreement) conclusions. In this paper, we examined what trade-economic and non-economic effects the AEO program and its MRA have in Korea. Research design, data and methodology: In this study we developed a model to verify the impact between utilization of AEO and trade-economic effects of the AEO and its MRA. After analyzing the validity and reliability of the model through Structural Equation Model we conducted a survey to request AEO companies to respond their experience on the effects of AEO program and MRA. As a result, 196 responses were received from 176 AEO companies and utilized in the analysis. Results: With regard to economic effects, the AEO program and the MRA have not been directly linked to financial performance, such as increased sales, increased export and import volumes, reduced management costs, and increased operating profit margins. However, it was analyzed that the positive effects of supply chain management were evident, such as strengthening self-security, monitoring and evaluating risks regularly, strengthening cooperation with trading companies, enhancing cargo tracking capabilities, and reducing the time required for export and import. Conclusions: When it comes to the trade-economic effects of AEO program and its MRA, AEO companies did not satisfy with direct effects, such as increased sales and volume of imports and exports, reduced logistics costs. However, non-economic effects, such as reduced time in customs clearance, freight tracking capability, enhanced security in supply chain are still appears to be big for them. In a rapidly changing trade environment the AEO and MRA are still useful. Therefore the government needs to encourage non-AEO companies to join the AEO program, expand MRA conclusion with AEO adopted countries especially developing ones and help AEO companies make good use of AEO and MRA.