• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.525-526
• /
• 2007

Continuous on-line temperature monitoring provides the means to evaluate current condition of equipment and detect abnormality. It allows corrective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on-line condition monitoring of energized equipment is applicable both as standalone system and with an interface with power quality monitoring system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.197-200
• /
• 2004

기존의 제어실 정보표시는 계통 및 기기정보를 바탕으로 하는 사건중심의 나열식 정보표시체계를 가지므로써 운전원이 표시되는 정보를 검색하고 판단하기까지는 많은 정신적 부담이 있었으며 이로 인한 운전오류가 많이 발생하였다. 이에 따라 본 논문은 일체형원자로(SMART:System-integrated Modular Advanced ReacTor) 제어실에서 운전원이 감독자 기능을 지원할 수 있도록 운전원이 쉽고 빠르게 필요한 운전정보를 검색하여 필요한 조치를 취할 수 있는 정보체계를 제안한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.790-793
• /
• 2000

FMS와 같은 자동생산시스템은 단위생산시스템으로서의 운영단계에서 타 생산시스템과의 통합된 시스템으로서 운영이 됨과 동시에, 원격지에서의 모니터링 및 제어가 요구되는 단계로 발전되고 있다. 단위설비 및 생산시스템의 현재 상태를 파악하고, 이를 이용하여 시스템 운전을 수행할 수 있도록 지원하는 네트워크와 통신기술이 필수적으로 요구되고 있다. 본 연구에서는 인터넷 기반으로 NC 공작기계를 포함한 FMS 의 원격 모니터링과 제어를 수행하도록 지원하는 장치인 게이트웨이 개발과 활용방안에 대하여 소개하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1249-1252
• /
• 1996

With the expansion of research and development for the CIM and the IMS, the importance of introducing the communication network is being increased. This paper presents an implementation of robot workcell by using Fieldbus and investigates data operation of the robot workcell. Through experiments, the operations of periodic and real-time data, and non-periodic real-time data are studied. Also, the relationship between the network transmission rate and the monitoring results from the sensor is analyzed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.149-158
• /
• 1994

A radial basis hybrid neural network (RHNN) is presented for on-line prediction of machine condition. A modular-based neural architecture is designed for modeling a machine condition process and for predicting future signal. A fast on-line learning algorithm is introduced. Experimental results showed the RHNN could be utilized efficiently for on-line machine condition monitoring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.81-89
• /
• 2001

Space systems are operating in a changing and uncertain space environment and are desired to have autonomous capability for long periods of time without frequent telecommunications from the ground station At the same time. requirements for new set of projects/systems calling for ""autonomous"" operations for long unattended periods of time are emerging. Since, by the nature of space systems, it is desired that they perform their mission flawlessly and also it is of extreme importance to have fault-tolerant sensor/actuator sub-systems for the purpose of validating science measurement data for the mission success. Technology innovations attendant on autonomous data validation and health monitoring are articulated for a growing class of autonomous operations of space systems. The greatest need is on focus research effort to the development of a new class of fault-tolerant space systems such as attitude actuators and sensors as well as validation of measurement data from scientific instruments. The characterization for the next step in evolving the existing control processes to an autonomous posture is to embed intelligence into actively control. modify parameters and select sensor/actuator subsystems based on statistical parameters of the measurement errors in real-time. This research focuses on the identification/demonstration of critical technology innovations that will be applied to Autonomous Spacecraft Health Monitoring/Data Validation Control Systems (ASHMDVCS). Systems (ASHMDVCS).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.21-32
• /
• 2016

Open-pit mines are the critical infrastructure for acquiring natural resources. Since it could be endangered by environmental and safety problems during operations, continuous monitoring is required for this type of mine. However, the domestic level management and accumulation of present state data of the topographical alteration are incurred by the development and restoration of open-pit mines relying on digital topographic maps and site surveys. Because of it, other than an expert cannot be viewed easily examines those changes information of open-pit mines in the domestic level. If the efficient management and public access of the open-pit mine is targeted, it is easy to build a web-based three-dimensional monitoring system, utilized in the space information software of open source. Therefore, we purposed on developing an open-pit mine monitoring system to support the development and restoration of the ecology-friendly environment, which could be easily monitored by the general public for those changes within terrain and environments due to operations of the mine.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2444-2452
• /
• 2022

The field-programmable gate array (FPGA) is gaining popularity in industrial automation such as nuclear power plant instrumentation and control (I&C) systems due to the benefits of having non-existence of operating system, minimum software errors, and minimum common reason failures. Separate functions can be processed individually and in parallel on the same integrated circuit using FPGAs in comparison to the conventional microprocessor-based systems used in any plant operations. The use of FPGAs offers the potential to minimize complexity and the accompanying difficulty of securing regulatory approval, as well as provide superior protection against obsolescence. Wireless sensor networks (WSNs) are a new technology for acquiring and processing plant data wirelessly in which sensor nodes are configured for real-time signal processing, data acquisition, and monitoring. ZigBee (IEEE 802.15.4) is an open worldwide standard for minimum power, low-cost machine-to-machine (M2M), and internet of things (IoT) enabled wireless network communication. It is always a challenge to follow the specific topology when different Zigbee nodes are placed in a large network such as a plant. The research article focuses on the hardware chip design of different topological structures supported by ZigBee that can be used for monitoring and controlling the different operations of the plant and evaluates the performance in Vitex-5 FPGA hardware. The research work presents a strategy for configuring FPGA with ZigBee sensor nodes when communicating in a large area such as an industrial plant for real-time monitoring.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.1027-1035
• /
• 2021

We presents a design of 3U cubesat MIMAN (Monochrome imaging for monitoring aerosol by nano-satellite) for aerosol monitoring mission with high spatial resolution. The main objective of MIMAN mission is to take images of aerosols around Korea and to provide auxiliary data for GK 2B cloud masking. For this mission, we derived mission requirements and constraints for the MIMAN mission. We designed the mission architecture and concept of operations. To reduce risk factors in space operation, we considered the safety of the communication. In every operation modes, UHF communication is available so that the cubesat can operate based on the ground commands. So, we can handle every problem at the ground station during mission operations. Based on the mission and concept of operations, we confirmed that the system design satisfied the system requirements. We designed the system interface considering data flow of each hardware, and evaluated the safety of the system with system budget analysis.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.163-171
• /
• 2024

In the existing air traffic management (ATM) system, various types of safety alert features are provided based on trajectory data to ensure the safety of aircraft operations, along with aircraft position and detailed flight information. The urban air traffic management (UATM) system for urban air mobility (UAM) should also provide safety alert features to ensure the safety of UAM operations. Considering the operational environment of UAM, it is necessary that the safety alert features provided at least match or exceed those available in the existing ATM system. This study aims to present the safety alert features of the new UATM system that differ from those provided by the existing ATM system before introduction and commercialization of UAM. The study was conducted focusing on the safety alert features that should be provided in the event of a deviation from the UAM's path, and the establishment of the safety alert features was carried out in two parts: approach path monitor (APM), which is applied during the approach phase, and route adherence monitoring (RAM), which is applied during the cruise phase.