• 한국유체기계학회 논문집
• /
• 제4권4호
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.171-176
• /
• 2001

The Pump/Motor Selection Program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc.. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements and calculates specific speed based on flow rate, total head and na Then the calculated specific speed is used to select pump types and rpm Prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program matches very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1791-1797
• /
• 2010

The Urban Transit Standardization Program has been supported by the Ministry of Land, Transport and Maritime Affairs. The Program consists of dozen or more projects and thus is quite complex, which implies that the program success heavily depends upon the effective management of various artifacts during the development. Particularly, in the complex systems development, developing and managing requirements is very important throughout the whole system life cycle. The requirements can be the basis of the design changes to be made later as well as the test and evaluation to be performed in the subsequent stages of the systems development. As such, the derivation of the system's requirement based on the needs from the customers, or stakeholder in a broad sense must be done properly. In particular, notice that the system is being developed but the system requirements are not fully available for some reasons. To complement this situation is the purpose of the study. To derive proper requirements effectively in the process of development, this paper proposes to draw up scenario using the output of the system under development and to utilize the use case diagrams and operational scenarios.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.802-814
• /
• 2016

본 논문은 철도차량의 운영상 반복시간과 차량소요량 사이의 관계를 고찰한다. 철도차량의 운영상 반복시간은 물리적 회차시간과 대기시간으로 구별되며, 본 논문은 이 가운데 운영상 반복시간의 산정모형과 산정 결과에 대한 다양한 고찰을 제시한다. 제시된 운영상 반복시간의 산정모형을 활용하면 터미날 정거장에서의 운영상 반복시간을 최소화 할 수 있도록 설정할 수 있다. 또한 차량소요량이 감소되는 운영상 반복시간 설정조건을 제시한다. 현실적인 데이터를 활용하여 운영상 반복시간 설정조건에 따라 차량소요량이 감소하는 사례와 분석결과를 제시한다. 본 논문에서 제시하는 방법은 기존 철도운영기관의 차량소요량을 최소화 하는 열차운영계획 및 차량운용계획 수립에 활용이 가능할 것으로 기대된다.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.801-807
• /
• 2010

Requirements management is one of the most essential activities of systems engineering in developing successful weapon systems. Particularly it is very important to consistently manage the traceability among the user requirements, the system requirements, the development specifications and the testing plans throughout the entire life cycle of the weapon system. However, the most part of requirements-related activities has centered around the functional and performance requirements but the integrated logistics support(ILS) requirement has not properly been managed. In this regard, a special attention is needed to develop and manage the ILS requirements. To do so, the ANSI/EIA-632 standard can be referred as a starting point since the ILS requirements of the weapon system under development are specified by the enabling products whereas the functional and performance requirements are covered by the end product requirements. Specifically, we first review and model several cases of previous weapon systems development, which reveals the problem of interest. Then, under the framework of ANSI/EIA-632, we study a hierarchical model for effectively managing ILS requirements by analyzing the features of ILS requirements. Finally, the value of the proposed model is discussed through the case study of electronic warfare equipment.

• 한국항공운항학회지
• /
• 제22권2호
• /
• pp.34-39
• /
• 2014

Airworthiness authorities specify the technical standards of airworthiness that propose minimum requirement of the commercial transport category and apply the rules in the certification process to ensure the safety of the aircraft. The Federal Aviation Administration and other national airworthiness authorities define the fatal accident risk levels for the safety assessment of the aircraft system and establish standard procedures to apply both qualitative and quantitative analysis techniques. However, an accident or incident may occur by the combination of various factors, although the aircraft is designed in accordance with the strict standards and approval by the Airworthiness Authorities. There are some key factors, such as human error, unpredictable complex system failures, degradation of the components reliability, improper maintenance task and intervals. Risk can be reduced by reflecting aircraft operational experience with similar types of aircraft in the process of aircraft development and safety assessment. Result of the root cause analysis for the Airbus A300-600 incident in which the aircraft engine reverser was deployed in the air have been introduced to reflect the design of system and related components. Also, this paper suggests to create a big-database in order to provide a feed-back to the FAR Part 25 transport category design and safety assessment of the operational experience.

• 한국국방경영분석학회지
• /
• 제35권3호
• /
• pp.17-30
• /
• 2009

본 연구에서는 무기체계 소요기획 단계에서 목표운용가용도를 산정할 때 활용할 수 있는 운용가용도 계산 모델을 제안한다. 운용가용도 계산 모델은 체계의 운용가용도 계산에 필요한 시간요소 정의와 시간 값 추정 방법으로 구성된다. 운용가용도 계산 시간요소는 총시간과 총비가동시간 요소로 구성된다. 시간요소는 운용형태종합 및 임무유형(OMS/MP : Operational Mode Summary/Mission Profile) 요소를 기초로 정의하였다. 총시간은 전시 작전기간 혹은 평시 365일이며, 총비가동시간은 총예방정비시간, 총고장정비시간, 총행정/군수지연시간으로 구성된다. 그리고 이러한 시간요소에 대하여 무기체계 유형별 시간 값 추정 방법을 제시하였다.

• 한국농공학회논문집
• /
• 제50권4호
• /
• pp.59-66
• /
• 2008

Anaerobic digestion system is getting more attractive in that it produces biogas in the process of organic waste stabilization. Net energy production is important when biogas production is concerned. In this study, net energy production was evaluated with respect to biogas production and heat losses in a hypothetical digester. Under the condition of digester operation with slurry inflow of 5% of TS, additional fuel is required to maintain digester temperature during the winder season. Substrate therefore, needs to have higher VS contents through co-digestion of silage or food waste that has greater values of methane production rate. Heating input slurry is important in cold season, which covers over 80% of heating requirement. Heat recovery from digestate is valuable to reduce the use of biogas for heating. It seems desirable to minimize slurry inflow when temperature is very low. Psychrophilic digestion may be a feasible option for reducing heating requirement.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.77-82
• /
• 2012

In Weapons acquisition process, if the requirements are not clear, it leads to confusion and conflict in business. In the development of next-generation weapons, to define and derive requirements has to start from decision of operational concept. It is difficult task and has many uncertainties. This paper has goal about development of knowledge acquisition process that derive military operational scenario-based requirements acquisition process and framework that classify and save the derived requirements for next project. That framework can generate new class and category, also suggest that verification of requirements. It help to derive and manage the requirements, and make it easy to grasp the requirements. Accordingly, it can help make military requirement plan and weapon acquisition process.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.31-38
• /
• 2019

The systems engineering standard process is intended to be customized for a given project environment and system characteristics. This study describes the experience gained by applying systems engineering to government-funded projects. The characteristics of government funded project are lack of common development process among the participating organizations and mechanism to determine system requirements. This study describes the contents of the systems engineering activities, including development of operational concept, system requirements, verification requirements (test cases), test verification plan, and implementation of system test and lessons learned from these activities.