This study applies Policy Streams and Expert Group Standing Change Framework (PSECF) proposed by SangJung Park and Chan KOH to analyze the Roh's Participatory government's decision making process on the wartime Operational Control (OPCON) transition. PSECF case study's results are as follows: Strong commitments of the former president Roh Moohyun and the progressive National Security Committee (NSC) were primary drivers in the policy developing process. But military expert groups such as the Ministry of National Defense (MND) and the Joint Chiefs of Staffs (JCS) were thoroughly excluded due to their passive role against the wartime OPCON transition. After the policy resolution, the standing of expert groups changed: the standing of advocate effects, the former progressive NSC who led the wartime OPCON transition in the Roh's Participatory government, went down but the conservatives such as ROK MND and JCS improve their standing because the conservative government kicks off 8 months later from the policy decision. In conclusion, the proposed PSECF through the Roh's Participatory government's case-study is worthy as an explanatory framework for high level national policies.
This study analyzes the military and political factors that influenced the Participatory Government's resolution in Wartime Operational Control (OPCON) Transition. The research on key factors in OPCON transition firstly implemented literature research and then increased feasibility through additional use of AHP. The analysis results showed that there was a negative effect for Korean Peninsular Defense in the 'ROK-US Alliance Asymmetry' area, a positive effect to increase ROK-led Capability of Theater Operation in the 'ROK and U.S. Alliance Interdependence' area and a positive effect for Invocation of ROK Self-Defense Power in the 'Interests of Participatory Government's Liberal Regime' area respectively. After applying AHP, "ROK exercise of Self-defense" in the 'Interests of Participatory Government's Liberal Regime' area received the highest assessment, while the "Increasement of North Korea's Threat" in the 'ROK-US Alliance Asymmetry' area received the lowest assessment. This study is meaningful in that it analyzed the key military and political factors in the Participatory Government's resolution of Wartime OPCON Transition using AHP.
This paper proposes a DC microgrid operational strategy and control method for improved service reliability. The objective is to supply power to as many non-critical loads as possible, while providing an uninterrupted power supply to critical loads. The DC bus signaling method, in which DC voltage is an information carrier, is employed to implement the operational strategy in a decentralized manner. During grid-connected operation, a grid-tied converter balances the power of the microgrid by controlling the DC voltage. All loads are connected to the microgrid, and operate normally. During islanded operation, distributed generators (DGs), a backup generator, or an energy storage system balances the power. However, some non-critical loads may be disconnected from the microgrid to ensure the uninterrupted power supply to critical loads. For enhanced service reliability, disconnected loads can be automatically reconnected if certain conditions are satisfied. Control rules are proposed for all devices, and detailed microgrid operational modes and transition conditions are then discussed. Additionally, methods to determine control parameter settings are proposed. PSCAD/EMTDC simulation results demonstrate the performance and effectiveness of the proposed operational strategy and control method.
This study selects political and military decision factors of Participatory Government's Wartime Operational Control(OPCON) Transition and analyzes, both quantitatively and qualitatively, the effects and relations between those factors. Previous research utilizing the Analytic Hierarchy Process(AHP) selected their decision factors based on academic data and field experience, requiring more objective analysis of the factors. For this study, we conducted a survey among security subject matter experts(SME) both online and offline. The results show that OPCON transition's decision factors were to 'recover military sovereignty', 'set the conditions for peaceful reunification' and 'improve ROK image through enhancing national power' which differs little from the previous AHP method studies. It also showed that 'recover military sovereignty' and 'set the conditions for peaceful reunification' had no relationship to each other and that the key factor that decided the OPCON Transition was actually 'recover military sovereignty' which represents the interest of the liberal party in ROK. This study finds its meaning by analyzing the decision factors of Participartory Government's OPCON Transition thorugh Delphi and DEMATEL method.
The Journal of the Convergence on Culture Technology
/
v.8
no.5
/
pp.291-295
/
2022
The transition to wartime operational control during the term of office, which was the promise of the Moon Jae Inn administration, fell through. More than 70 years after it was transferred during the Korean War in 1950, the policy of converting wartime operational control has been repeatedly decided and reversed several times. This conversion of wartime operational control is a national policy directly related to our security, and it is most important to understand the determinants of the administration's conversion to wartime operational control. This paper selects two cases of adjustment of wartime operational control policy during the Lee Myung Bak administration in 2006 and 2010 during the Roh Moo Hyun administration as the subject of the study and expects to gain not only policy predictive power but also successful policy execution at the time of the two administration' policy changes.
Flight modes of automatic flight control system for light general aviation flight deck. Garmin G1000, were realized using Stateflow. In developing aircraft, it is difficult to verify the operational flight program in particular branch statement because developer can not see any visual logical steam. So, Stateflow has been used to visualize logical stream, transition from one flight mode to another flight mode. The performance was approved by applying flight mode transition conditions of G1000 to proposed transition system that is composed of states, switches, events, data and transition conditions. DURMI-II was used as 6-DOF simulation model.
Journal of the Korea Institute of Military Science and Technology
/
v.12
no.2
/
pp.213-221
/
2009
An aircraft collision accident is a disaster that causes great losses of inventories and lives. Though a collision avoidance warning function is provided automatically to pilots in the aircrafts by the enhancement of the aircraft capability, achieving fast decision-making to escape a collision situation is a complex and dangerous work for pilots. If an in-flight collision situation is controlled by the air traffic control system which monitors all airplanes in the air, it would be more efficient to prevent in-flight collisions because it can handle the emergency before the pilot's action. In this paper, we develop the collision avoidance warning function in the air traffic control system. Specifically, we design and implement the five stages of the collision avoidance function, and propose a visualization method which could effectively provide the operators with the trajectories and altitudes of the aircrafts in a collision situation. By developing an in-flight collision warning function in the air traffic control system that visualizes flight patterns through the state transition data of in-flight aircrafts on the flight path lines, it can effectively prevent in-flight collisions with traffic alerts. The developed function allows operators to effectively select and control the aircraft in a collision situation by providing the operators with the expected collision time, the relative distance, and the relative altitude while assessing the level of alert, and visualizing the alert information which includes the Attention-Warning-Alert phase via embodying the TCAS standard. With the developed function the air traffic control system could sense an in-flight collision situation before the pilot's decision-making moment.
Journal of The Korean Association For Science Education
/
v.17
no.2
/
pp.139-148
/
1997
This study investigated the influences of the cooperative learning strategies upon students' achievement and their perceptions of learning environments in a middle school physical science course. Prior to instruction, the Group Assessment of Logical Thinking was administered, and its score was used as a blocking variable. Mid-term examination score was used as a covariate. For the treatment group with heterogeneous grouping, cooperative learning instruction (the Learning Together model) was used, which emphasized group reward, individual accountability, and role division. For the control group, traditional instruction was used. After instruction, an achievement test consisting of three subtests (knowledge, understanding, and application), and the perception questionnaire of classroom and laboratory environments, were administered. ANCOVA results revealed that there was a significant interaction between instruction and the level of logical reasoning ability although there were no significant differences in all three subtest scores of the achievement test. For the concrete operational reasoners, the treatment group performed better in the subtests of understanding and application than the control group. For students at the formal and transition levels, however, the treatment group scored lower than the control group. Significant interactions were also found in the perceptions of classroom environment and laboratory environment. For the concrete operational reasoners, the treatment group showed more positive perception than the control group. For the students at the formal and transition levels, the control group had positive perception than the treatment group. Educational implications are discussed.
The Transactions of the Korean Institute of Electrical Engineers P
/
v.57
no.2
/
pp.72-78
/
2008
The speed variation of SRM is fulfilled throughout a transition from chopping control to single pulse operation. (i,e., low speed to high speed operation). It is unsatisfied with performance at all operational regimes. In this paper, the operational performance of SRM can be improved by using current hysteresis control method. This method maintains a generally flat current waveform. At the high speed, the current chopping capability is lost due to the development of the back-EMF. Therefore SRM operates in single pulse mode. By using zero-current switching and zero-voltage switching technique, the stress of power switches can be reduce in chopping mode. When the commutation from one phase winding to another phase winding, the current can be zero as fast as possible in this period because several times negative voltage of DC-source voltage produce in phase winding. This paper is compared to performance based on conventional C-dump converter topology and the proposed resonant C-dump converter topology. Simulation and experimental results are presented to verify the effectiveness of the proposed circuit.
Kim, Hack-Joon;Yoon, Chang-Bae;Hong, Su-Woon;Lee, Woo-Sin;Yoo, In-Deok;Jo, Se-Hyeon
Journal of the Korea Society of Computer and Information
/
v.24
no.6
/
pp.99-107
/
2019
With the development of various types of military Unmanned Aircraft(UA)s, the need for interworking and integration between different platforms gradually increased. In order to ensure interoperability at each military UA System(UAS) level, North Atlantic Treaty Organization(NATO) has established STANAG-4586 "Standard Interfaces of Unmanned Aircraft(UA) Control Systems(UCS) for NATO UA Interoperability-Interface Control Document". This paper looks at the basic design structure of STANAG-4586 and the changes on Edition 4 to enhance joint operational capability through reflecting and updating the interoperability design of the military UAS. In particular, we analyze the enhanced Datalink Transition/Handover Procedure and Autonomous functions, one of the biggest features added to the edition. Through this, we propose a modification of UA data link exclusive control using UA Bypass structure, which was impossible in the one-to-one communication structure between existing UA and Core UCS(CUCS). We also suggest ways to improve UA operational reliability by applying Autonomous Functions that directly decides how to deal with emergency situations, rather than by a remote operator over CUCS.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.