• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.366-374
• /
• 2013

Maritime transportation circumstance is changing rapidly in accordance with the increase of cargo volume between countries and increase of marine leisure activities by improvement of quality of life. And the circumstance for ship operation is also changing due to aging of seafarers and increasing of foreign seafarers. To cope with such changes in maritime environment well, it requires higher safety management skills from shipping companies, the main subject in charge of the safety matter. In this paper, we analyzed domestic and foreign similar system, and then applied imitation strategies for introduction of an unific evaluation and management system that was consist of marine accidents, port state control, ISM Code and so on from shipping companies. We defined that the imitation industry and system are converted accident ration of construction industry and traffic safety excellence company of road transportation, and then extracted relevant law, evaluation index, incentive system as a imitation subject. We also proposed scheme that introduction of basis law, and evaluation tool with marine accidents ratio, port state control & ism code result, and incentives such as immunity of safety inspection or reduction of commission for introduction of company's safety management level evaluation system. Finally, we proposed the imitation timing and plan in stages for system's sustainable development through the prompt introduction and continuous enforcement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.33-40
• /
• 2005

This paper describes a design of FFT/IFFT Core(FFT256/2k), which is an essential block in terrestrial DMB modem. It has four operation modes including 256/512/1024/2048-point FFT/IFFT in order to support the Eureka-147 transmission modes. The hybrid architecture, which is composed of R2SDF and R2SDC structure, reduces memory by $62\%$ compared to R2SDC structure, and the SQNR performance is improved by TS_CBFP(Two Step Convergent Block Floating Point). Timing simulation results show that it can operate up to 50MHz(a)2.5-V, resulting that a 2048-point FFT/IFFT can be computed in 41-us. The FFT256/2k core designed in Verilog-HDL has about 68,400 gates and 58,130 RAM. The average power consumption estimated using switching activity is about 113-mW, and the total average SQNR of over 50-dB is achieved. The functionality of the core was fully verified by FPGA implementation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.251-258
• /
• 2012

Recently, NAND Flash memory structure is evolving from SDR (Single Data Rate) to high speed DDR(Double Data Rate) to fulfill the high performance requirement of SSD and SSS. Accordingly, the proper ways of transferring data that latches valid data stably and minimizing data skew between pins by using PHY(Physical layer) circuit techniques have became new issues. Also, rapid growth of speed in NAND flash increases the operating frequency and power consumption of NAND flash controller. Internal voltage variation margin of NAND flash controller will be narrowed through the smaller geometry and lower internal operating voltage below 1.5V. Therefore, the increase of power budge deviation limits the normal operation range of internal circuit. Affection of OCV(On Chip Variation) deteriorates the voltage variation problem and thus causes internal logic errors. In this case, it is too hard to debug, because it is not functional faults. In this paper, we propose new architecture that maintains the valid timing window in cost effective way under sudden power fluctuation cases. Simulation results show that the proposed technique minimizes the data skew by 379% with reduced area by 20% compared to using PHY circuits.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.295-309
• /
• 2006

The present study was aimed to evaluate the incidence, etiological factors, and management of cleft lip and palate. Two hundred and twenty patients with cleft lip and/or cleft palate who were treated at Department of Oral and Maxillofacial Surgery, Chonnam National University Hospital, during the period between January 1994 and December 2003 were reviewed. The ratios of cleft lip : cleft lip with cleft palate : and cleft palate were 0.4:1.1:1. Males were more common than females in cleft lip (1.3:1) and cleft lip and palate (2.5:1), while females were more common than males in cleft palate (1:1.3). In the cleft side, left clefts were more prevalent than right clefts (cleft lip 1.3:1, cleft lip and palate 1.6:1). Unilateral clefts were more common than bilateral clefts in cleft lip (79:21). Cleft lip and cleft palate were more common in those with blood type A (34.5%) than those with other types. There was no significant relationship between birth season and frequency of clefts. The clefts were common in the first-born (48.8%), and in mothers aged between 25 and 29 (51.7%). Medication (24.7%) and stress (16.7%) during the first trimester were noted. Positive familial history was noted in 13 cases (5.9%). Thirty-two cases (15%) were associated with other congenital anomalies, in which tonguetie (40.6%) and congenital heart disease (21.9%) were most common. Among 100 patients with cleft palate, 77 patients had middle ear disease (77%), which occurred predominently in the incomplete cleft palate. Seventy-six among the 77 patients received myringotomy and ventilation tube insertion, and the remaining one received antibiotic medication only. Cleft lips were treated primarily at 3 to 6 months, and cleft palates were at 1 to 2 years. Treatment regimens included modified Millard method mainly in the cleft lip, and Wardill V-Y, Dorrance method, and Furlow method in the cleft palate. The percentage of palatal lengthening as type of cleft palate was greater in the incomplete cleft palate group (11.2%) than in the complete cleft palate group (9.6%). The percentage of palatal lengthening as operating method was no difference between the Furlow method (10.9%) and the push back method (10.7%). As postoperative complications, hypertrophic scar was most frequent in the cleft lip, and oronasal fistula in the cleft palate. In summary, it was shown that medication and stress during the first trimester of pregnancy were frequently associated with cleft lip and cleft palate, adequate timing and selection of method of operation are important factors to obtain morphologically and functionally good results. Furthermore prevention and treatment of middle ear disease are important in cleft palate patients because of its high co-occurrence.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.139-144
• /
• 2009

The microseismic monitoring system with wide range of frequency has been operating in real time and it is remotely monitored at indoor and on-site for one year. This system was constructed and established in order to secure the safe and effective operation of the KAERI Underground Research Tunnel(KURT). For one year monitoring work, total 14 events were recorded in the vicinity of the KURT, and the majority of events are regarded as ultramicroseismic earthquake and artificial impacts around the tunnel. The major event is the magnitude 3.4 earthquake which was centered around Gongju city, Chungnam Province. It means that there is no significant evidence of high frequency microseismic event, which is associated with fracture initiation and/or propagation in the rock mass and shotcrete. Three components sensor was applied in order to analyze and define the direction of vibration as well as an epicenter of microseismic origin, and also properly designed and installed in a small borehole. This monitoring system is able to predict the location and timing of fracturing of rock mass and rock fall around an undreground openings as well as analysis on safety of various kinds of engineering structures such as nuclear facilities and other structures.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.4
• /
• pp.72-81
• /
• 2006

In this paper, we first define a total of 64 instructions that are considered to be essential and frequently used, construct a datapath diagram, determine the control sequence using a finite state machine, and implement an 8-bit microcontroller using FPGA in VHDL. In the past, only functional simulation results of a rudimentary microcontroller were reported, the microcontroller lacked interrupt handling capability, or it was not implemented in hardware. We have designed a self-contained 8-bit microcontroller such that it can perform data transfer, addition, and logical operations, as well as stack and external interrupt operations. Following timing simulation of the designed microcontroller, we implemented it in an FPGA and verified its operation successfully. The design and implementation has been done under the Altera MAX+PLUS II integrated development environment using the EP1K50TC144-3 chip. The maximum operating frequency, the total number of logic elements used, and the logic utilization were found to be 9.39 MHz, 2813, and 97%, respectively. The result can be used as a microcontroller IP, and as needs arise, the VHDL code can be modified accordingly.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.577-582
• /
• 2016

This Study focused on the development of SMPS (Switching Mode Power Supply) to supply the constant votage and current nevertheless LED fluorescent Light generated the electric noise (with Harmonics) and Inrush current at instant time of turn-on and off. Recently, according to the Green policy in government, the LED fluorescent Lighter showed the rapidly increasing tend as indoor and outdoor Lighter. But, because of costs, LED fluorescent Light not considered and neglected the following items; power factor, efficiency, Harmonics and Inrush current. So, we are developed the SMPS about 3 key issues as follows: 1st, power factor and efficiency is 85%. 2nd, the switching noisy by harmonic is minimized. 3rd, the Inrush current at turn on and off time is reduced the minimum 0.3 A after $100{\mu}sec$ on turnon time. The proposed SMPS adjusted by LNK 409 driver (included the high frequency modulation function). Although, the developed SMPS maintained the about 85% of power factor and efficiency. but, the SMPS must be generated low heat by the variation of minute load current at switching timing. To improve the above weak point, the developed SMPS have the feedback monitoring circuit between input side and output side to maintain the power factor and efficiency. Also, we are studied the time-constant of control circuit to output the constant voltage and current nevertheless the load disturbance of LED lighting. The LED fluorescent Light of 46W is checked the above items.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.4
• /
• pp.472-478
• /
• 2001

Objectives : The authors present a retrospective analysis of 100 consecutive adult patients harboring craniopharyngiomas who underwent microsurgical resection between 1981 and 1999 to assess the long-term outcome of surgical treatment and to determine the most optimal management strategy. Methods : The extent of surgical removal was divided into four categories ; GTR(gross total removal), RSTR(radical subtotal removal), STR(subtotal removal),and PR(partial removal). The median follow-up period was 50 months(4-198). CT scan and/or MR imaging and hormonal status were evaluated to the last follow-up. Results : Visual disturbance was the most common presentation, which was improved in 42 cases and aggravated in 19 cases following the operation. Hypopituitarism was detected in 56 patients preoperatively, 82 during the immediate postoperative period, and 76 at the last follow-up. Improvement of pituitary function was not observed in any of these patients. Twenty of 100 patients showed recurrence at the mean of 27 months(3 to 196). The median progression-free survival(PFS) time of all patients was 145 months and 5-year PFS rate was 74%. Five-year PFS rate of GTR or RSTR group(71%) was significantly higher than that of STR or PR group(30%)(p=0.01). Postoperative radiation therapy significantly prolonged the PFS from 94 months in non-radiation group to 182 months(p=0.002). However, there was no statistical difference in number of patients who required hormonal replacement therapy between radiation and non-radiation group. Conclusion : Visual disturbance can be improved by early diagnosis and surgical decompression. GTR or RSTR in selected patients is considered a proper surgical strategy. Post-operative radiation therapy for residual tumors must be considered, although the ideal timing of radiation therapy is to be determined.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.335-350
• /
• 2006

Due to the development in industrial technology, changes in consumer behavior and aggravating competition within the industry, it is growing only harder every day to build up a strong brand power. Besides, a brand is supposed to age as time goes by, following a brand life cycle, as it is not a solid, immutable asset but something of a living creature. Therefore, self-renovation and revitalization efforts are needed, in order to incessantly confirm the self existence through the relationship with the consumer. In sum, revitalization operation is needed to renew a brand that has grown trite in the passage of time or due to the change in market condition, so as to bring it back anew to the consumers. This study did not stop at measuring the effect of a design renewal as a short-term assignment, but focused on the long-term brand management following the brand life cycle and aimed to define the effective timing and method of revitalization by comprehending the analysis results of consumer consciousness by analyzing the successful cases of brand revitalization and selecting the research analysis targets. As a result, this study proved that a properly-timed brand revitalization efforts in order to cope in advance with predictable changes in environment, can significantly prevent any drop of brand equity from occurring and then extend the brand life cycle. Also, this study could find that a brand revitalization is not a mere concept of a strategy for a short-term sales increase, but should be a long-term strategy to manage a brand, which must be practiced continuously in the time when the brand life cycle curve starts to fall. This research could also confirm that a superficial design renewal, which changes only the packaging of a brand, peformed in short-term haste, is not of help at all.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.47-53
• /
• 2020

The purpose of this study was to increase product reliability by improving the durability of the breech block for a 30mm Automatic Gun. The breech block is a key component of a gun that functions as chambering, closing, and extracting. The breech block requires high reliability, which needs to be improved because cracks of a breech block can occur early in operation. Cause analysis confirmed that the crack is caused by repeated impacts. Therefore, the following improvement measures were studied, and the effects were demonstrated using a firing test. The energy of impact absorption was increased by changing the material, and the stress concentration was mitigated by increasing the value of R. In addition, the fatigue life was increased by adding Shot-peening, deleting chromium plating, and changing the forging method. The firing test did not show firing trouble for up to 5,000 rounds. The start timing of the crack was delayed, and the depth was small. Therefore, the improved product was more durable than the existing product. This study can be used as a useful reference when assessing the improvement of the durability of similar products, life study, and criteria for crack acceptance.