• 수산해양교육연구
• /
• 제25권4호
• /
• pp.998-1007
• /
• 2013

At container terminals, a major measurement of productivity can be work efficiency. For improving the productivity of container crane, the more efficient container yard operation method is necessary in container terminals. Recently, container terminal operators make an experiment on the dual cycle operation, which ship loading/unloading were carried out simultaneously, for increasing the productivity of container crane. In this paper, propose a system operating efficient dual cycle methods as utilize Ad-hoc technology in distributed port operation system. The dual cycle methods that proposed recognizes position information of Y/T during an action in Ad-hoc networks in case of container transfer works by real time as load an Ad-hoc module to Y/T taking charge of a container transfer with quay and yard. Utilize Ad-hoc networks technology in an operating system of container yard, and efficiently distributed processing done Y/T to container crane compare with operation systems of the existing dedicated method, and an improvement can do an operating system of an yard.

• 지능정보연구
• /
• 제14권3호
• /
• pp.77-86
• /
• 2008

본 연구에서는 터미널의 운영전략과 하역시스템의 다양한 속성들이 반영이 된 터미널의 하역생산성 추정모델을 제시하였다. 터미널 설계 시 고려되는 하역시스템 특성 및 장치장의 레이아웃을 고려한 다양한 요소들을 반영하여 실험하였으며 시뮬레이션을 이용하여 하역 생산성 자료를 수집하였다. 수집된 자료를 바탕으로 회귀분석을 통하여 모델의 유의성을 검증하였다.

• 한국산림과학회지
• /
• 제106권1호
• /
• pp.54-62
• /
• 2017

산림바이오매스의 효율적인 수집 및 운반을 위하여 칩하베스터를 개발하고 작업 생산성 및 비용을 분석하였다. 칩하베스터의 주요 목표제원은 속도 8 km/hr, 최대등판능력 $30^{\circ}$, 최대적재량 2,000 kg 등이고, 차체구조는 회전반경을 줄이기 위하여 차체굴절식을 채택하고, 주행장치는 6륜 구동으로 후륜은 접지력을 높이기 위하여 탠덤보기방식을 채택하였다. 개발된 칩하베스터의 주행테스트 결과, 칩 적재시 ${\pm}10%$ 경사에서 각각 6.9 km/hr, 8.1 km/hr로 나타났다. 또한, 공차시 ${\pm}10%$ 경사에서 각각 7.3 km/hr, 7.9 km/hr로 나타났다. 따라서, 주행성능은 개발목표를 달성하였다고 판단된다. 작업생산성 및 비용을 분석한 결과, 파쇄 및 운반의 작업생산성은 약 $10m^3$/일이었으며, 작업비용은 393,126원/일로 나타났다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.400-408
• /
• 2009

Simulation applications for analyzing the productivity of construction operations at operation level and project schedules at project level are crucial methods in project management. The application at two different levels should be very tightly linked to each other in practice. However, appropriate integration at the levels is not achieved in that existing systems do not support to integrate operation models into a schedule model. This paper presents a new approach named to Discrete Event Simulation-Nesting modeling approach, which supports not only productivity analysis at operation level but also schedule management at a project level. The system developed by the authors allows creating operation models at the operation level, maintaining them in operation model library, executing sensitivity analysis to find the behaviors of the operation models when different combination of resources are used as existing DES systems do. On top of the conventional functions, the new system facilitates to find the optimum solution of resource combinations which satisfy the user's interest by computing the hourly productivity and the hourly cost of the operation. By drag-and-dropping an operation model kept in the operation model library, the operation models are integrated into an activity of the schedule model. When a complete schedule model is established by nesting operation models into the schedule model, stochastic simulation based scheduling is executed. A case study is presented to demonstrate the new simulation system and verify the validity of the system.

• Journal of Nutrition and Health
• /
• 제39권4호
• /
• pp.417-425
• /
• 2006

The purpose of this study were to a) investigate operation of human resource in contract foodservice management company (CFMC), b) identify the staffing indices for the establishment an labor productivity for CFMC, and c) develop standardized model of staffing demand as foodservice's scale in CFMC. The data was collected using FS intra-net system from 138 contract-managed foodservice operations in A CFMC and statistical analysis was completed using the SAS/win package (ver. 8.0) for description analysis, ANOVA, Duncan multiple comparison, pearson correlation analysis, and regression analysis. The types of operation were included factory (45%), small scale operation (26%), office (11%), department store (10%), training institute (4%), and hospital (3%). The distribution of foodservice scale was classified by meal served was as follows; 'less than 500 meals (47%)', 'from 500 to 1500 meals (25%)', 'from 1500 to 2500 meals (17%)', and 'more than 2500 meals (12%)'. There was two types of contract method, fee-contract (53%) and profit-and-loss contract (46%) Some variables were significantly high operation indices such as selling price, food cost, monthly sales, net profit and others were significantly low operation indices such as labor, meal time a day in the small foodservice on meal scale (p<.001). The more foodservice was large, the more human resource was disposed on dietitian, cook, cooking employee altogether (p<.001). Foodservice in A CFMC was divided into 2 groups by 500 meals a day, according to comparative analysis of labor productivity as meal scale per working hour, meal scale a day and operation indices as meal per foodservice employee, meal per cooking employee (p<.001). The regression equation model was developed as 'the number of employees=1.82+0.014 ${\times}$ meal served' in the operation of less than 500 meals, 'the number of employees=9.42+0.013 ${\times}$ meal scale a day -0.94 ${\times}$ meal scale per working hour' in the operation over 500 meal scale using labor productivity indices and operation indices. Therefore, CFMC could be enhanced efficiency of human resource arrangement using the standardized model of staffing demand and would be increased effectiveness of profit.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1194-1201
• /
• 2022

The existing literature has witnessed the importance of productivity assessment and deducing factors affecting it. However, yet many models have shown limitations in practical applications in actual construction sites for process planning due to uncertainty and lack of data. This research presents a productivity assessment and database generation framework using simulation and compares the results with RSMeans to derive appropriate equipment combinations alternatives for earthwork operations. Data of 15 different conditions was collected from 5 different construction sites. Prediction accuracy above 90% were achieved for the simulation models with average error rate of 7.4%. The construction productivity assessment framework presented in this study is expected to be highly applicable to operation planning for earthwork operations.

• Journal of Forest and Environmental Science
• /
• 제33권2호
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• 한국산림과학회지
• /
• 제108권4호
• /
• pp.574-581
• /
• 2019

본 연구는 임목수확작업에 사용되는 트랙터윈치의 작업효율성을 검토하기 위하여 강원도 양양군지역의 소나무 간벌지를 대상으로 트랙터윈치를 이용한 전목 집재작업에서의 작업생산성 및 작업비용을 분석하였다. 평균집재거리는 29m, 평균 임목재적은 0.15㎥으로 총 95회 집재작업 중 상향집재가 51%, 하향집재가 49%로 작업이 실행되었다. 집재작업 생산성은 하향집재 2.28㎥/hr, 상향집재 1.89㎥/hr으로 운용적 작업지연시간을 최소화하여 기계이용률을 80%로 높일 경우, 약 0.5㎥/hr 생산성이 향상될 것으로 판단된다. 집재작업비용은 하향집재 작업비용(44,116원/㎥)이 집재본수(본/cycle)의 차이로 인하여 상향집재작업비용(53,369원/㎥) 보다 낮게 산출되었다. 또한 상·하향 집재작업시간 예측모델식을 개발하여, 민감도 분석을 실시한 결과, 집재거리(m), 집재본수(본/cycle), 집재경사(%) 순으로 집재작업시간에 영향을 미치는 것으로 분석되었다. 향후 집재방향에 따른 정확한 예측모델식을 개발하기 위하여 추가적인 조사가 필요할 것으로 사료된다.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.363-371
• /
• 2021

Forest operations like timber harvesting have already been mechanized to reduce hazards to the worker and increase productivity. However, timber harvesting operations have still been considered potentially dangerous and expensive on steep terrain. Teleoperation, to control the timber harvesting machine at a distance, has the potential to improve the safety, productivity and efficiency of harvesting operations on steep terrain. To verify the effects of teleoperation, an experimental prototype system of a monitor image-based teleoperation was constructed using a real forestry machine. In this study, the productivity of excavator based grapple loader, which is one of the most used mechanized harvesting equipment in the timber production, was analyzed using time-study method. Factors like skill and age of operators, influencing loader productivity in timber loading operation were also evaluated by statistical analysis. Productivity analysis results showed that less experienced operators were more productive than experienced operators for teleoperation through image of monitors in the operator cabin. These results are shown to be unfamiliar to the monitor image and different loading operation pattern by operators. According to the results, the monitor image-based teleoperation system of forestry machine need to improve the resolution and installation position of camera. It was expected that additional studies will be needed for real-time remote control of forestry machine in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.62-63
• /
• 2016

Existing studies relative to enhancing sustainability of earth-work are mainly involved in the performance of construction equipments. They assume that there is no variation of the engine power and fuel consumption and classify the dozer operation into working and idle conditions. They enable to find the most eco-friendly equipment fleet deployment plan. However, they are confined in that they do not provide a measure to assess the sustainability of the operation plan and suggest optimal alternative(s). This paper presents a method that identifies an optimal dozer operation plan that assures sustainability by reducing fuel consumption of the equipment. The method computes the dozer operation productivity using engine-torque-output map provided by equipment manufacturers. Indeed, it identifies the eco-dozing operation that minimizes fuel consumption and maximizes the target productivity.