• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.94-100
• /
• 2011

TCMS is the most important controller in the subway train for reliable train control and service oriented flexibility. TCMS software charges communications and control of train and maintains control devices so we use QNX for real-time control. This paper introduces overall software development of TCMS using various diagrams. Software implementation details in TC and CC are explained using deployment diagram through train configuration. Driving control process among many processes is focused to present implement details which controls train by driver or automatic train operation and handles commands to control deriving devices in cars. Reliable operation of train and easy maintenance process is achieved through the same hardware in train control computer and car control computer.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.10
• /
• pp.1081-1087
• /
• 2011

An internally radiating photobioreactor was applied for the production of astaxanthin using the unicellular green alga Haematococcus pluvialis. The cellular morphology of H. pluvialis was significantly affected by the intensity of irradiance of the photobioreactor. Small green cells were widespread under lower light intensity, whereas big reddish cells were predominant under high light intensity. For these reasons, growth reflected by cell number or dry weight varied markedly with light conditions. Even under internal illumination of the photobioreactor, light penetration was significantly decreased as algal cells grew. Therefore, we employed a multistage process by gradually increasing the internal illuminations for astaxanthin production. Our results revealed that a multistage process might be essential to the successful operation of a photobioreactor for astaxnthin production using H. pluvialis.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.999-1006
• /
• 2003

This research presents efficient operation schemes that is emphasized on mailing center's automation parts. We utilized the automation indicator to analyzed the mailing center system. For automation of the mailing center, we proposed the sorting automation alternative of registered mail, automation of conveyance system between workshops and the Up-Grade scheme for process improvement in mailing center. The selection of the registered mailing f s automation alternatives is composed of the AHP(Analytic Hierarchy Process) method. Through the analysis of the space and the quantity of materials, the simulation experiments are conducted to examine conveyance equipment possibility of the mailing center. By simplifying the mailing center conceptually, we proposed the upgrade of process for the mailing center system. The result of this research can give some ideas to people who are formulating a policy for the mailing center operation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.3
• /
• pp.123-133
• /
• 1998

A cell design model based on operation sequence is proposed for maximizing the total parts flow within cells considering the data of Process plans for parts, Production volume, and cell size. A relationship between machines is calculated on the basis of the process plans for parts obtained from process plan sheets. Then the machines are classified into machine cells using the relationship. The model is formulated as a 0-1 integer programming and a genetic algorithm approach is developed to solve the model. The developed approach is tested and Proved using actual industrial data. Experimental results indicate that the approach is appropriate for large-size cell design problems efficiently.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.37-41
• /
• 2002

In this work. we have designed two different kinds of Rapid Single Flux Quantum (RSFQ) OR-gates. One was based on the already developed RSFQ cells and the other was aimed to develop a more compact version. In the first circuit, we used a combination of two D Flip-Flops and a merger and in the other circuit we used a combination of RS Flip-Flops and Confluence Buffer. We tested the circuit performance by using the simulation tools, Xic and Wrspice. We obtained the operation margins of the circuit elements by a margin calculation program, and we obtained the minimum operation margins of $\pm$30%. The circuits were laid out, aimed to fabricate by using the existing KRISS Nb process. KRISS Nb process includes the $Nb／Al_2$$O_3$／Nb trilayer fabricated by DC magnetron sputtering and the reactive ion etching technique for the definition of the features. The major tools used in the layouts were Xic and L-meter.

• Korean Security Journal
• /
• no.3
• /
• pp.117-144
• /
• 2000

Not only has there been movement along the sectoral continuum, Johnston argues, but changes in the spatial balance of policing are also visible. More concretely, he suggests that British policing has been undergoing a century-long process that has gathered pace since the 1960s. Three factors have been central to this process. First, legislative centralization brought about by the Police Act 1964 - which established the tripartite structure for police governance and amalgamated forces - and the Local Government Act 1972 which reorganized local government. Secondly, the political and industrial unrest of the 1970s and early 1980s led to the establishment of new levels of national police co-operation and, in the words of one author, to the establishment of a 'de facto national police force'. Thirdly, increasing European influence has further internationalized police co-operation and organization. Johnston concludes that the spatial restructuring that appears to be taking place in British policing is indicative of a broader process of fragmentation of social structures and systems for maintaining order.

• Transactions of Materials Processing
• /
• v.6 no.4
• /
• pp.329-337
• /
• 1997

Forging of an inner pulley for compressor clutch assembly of car air conditioner is investigated in this study. In cold forging of inner pulley, the design requirements are to keep the same height of the inner rib and the outer one, and to make uniform the hardness distribution in the forged product. Using the rigid-plastic finite element simulation. we design the optimal process conditions, which has a performing operation. Also the final product configuration of forging has to be designed again in view of the metal flow involved in the operation, derived from the finite element simulations. The forged pulley is investigated by checking the hardness distribution and it is noted that the distribution has improved to be even and high enough for industrial application.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.29-33
• /
• 2017

This paper presents a development of vision aligner with three channels for the wafer and plate bonding machine in manufacturing of LED. The developed vision aligner consists of three cameras and performs wafer alignment of rotation and translation, flipped wafer detection, and UV Tape detection on the target wafer and plate. Normally the process step of wafer bonding is not defined by standards in semiconductor's manufacturing which steps are used depends on the wafer types so, a lot of processing steps has many unexpected problems by the workers and environment of manufacturing such as the above mentioned. For the mass production, the machine operation related to production time and worker's safety so the operation process should be operated at one time with considering of unexpected problem. The developed system solved the 4 kinds of unexpected problems and it will apply on the massproduction environment.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.36-40
• /
• 1998

Tool shop of the‘D’Motor Co.(DMC) fabricates dies for producing automotive press panels. In order to increase the production capacity of the tool shop, DMC established an FMS that consists of high-speed machines and a CMM at the tool shop in 1997. Due to the difference in machine capability among the existing machines and the new FMS it is needed to find an optimal way of allocating workloads among machines to maximize the production. In a way to solve this, we model the die fabrication process of the tool shop and analyze its performance by computer simulation. In this study, we at first identify the bottleneck processes of the die fabrication process under the current operation policy. Then, we derive some alternative operating policies applicable to the tool shop, and analyze the optimal operation policy by comparing the performance of the tool shop following each alternative policy.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.133-139
• /
• 2005

In this study, as MBBR(Moving Bed Biofilm Reactor) process using waste tire media is suggested for retrofitting with advanced wastewater treatment and the removal property of organic matter and nutrient and the capacity of media are evaluated through long-term operation with pilot plant following seasons, the application capacity of retrofitting with MBBR process to a existing wastewater treatment is studied. As a result of the long-term operation of the process, it is proved that there is no loss and abrasion of media, and also that it is possible to secure the sufficient attached bio-mass. The values of organic matter and nutrient in effluent are suitable for the strict discharged water quality standards in every season including winter.