• Title/Summary/Keyword: Operation margin

Search Result 402, Processing Time 0.061 seconds

A New Algorithm for Unstable Mode Decision in the On-line Transient Stability Assessment (온라인 과도안정도 평가를 위한 새로운 불안정모드 선정 알고리즘)

  • Chang, Dong-Hwan;Kim, Jung-Woo;Chun, Yeong-Han
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.57 no.7
    • /
    • pp.1123-1128
    • /
    • 2008
  • The necessity of online dynamic security assessment is getting apparent under Electricity Market environments, as operation of power system is exposed to more various operating conditions. For on-line dynamic security assessment, fast transient stability analysis tool is required for contingency selection. The TEF(Transient Energy Function) method is a good candidate for this purpose. The clustering of critical generators is crucial for the precise and fast calculation of energy margin. In this paper, we propose a new method for fast decision of mode of instability by using stability indices and energy margin. The method is a new version of our previous paper.[1] Case studies are showing very promising results.

Sense Amplifier Design for A NOR Type Non-Volatile Memory

  • Yang, Yil-Suk;Yu, Byoung-Gon;Roh, Tae-Moon;Koo, Jin-Gun;Kim, Jongdae
    • Proceedings of the IEEK Conference
    • /
    • 2002.07c
    • /
    • pp.1555-1557
    • /
    • 2002
  • We have investigated the precharge type sense amplifier, it is suitable fur voltage sensing in a NOR type single transistor ferroelectric field effect transistor (1T FeFET) memory read operation. The proposed precharge type sense amplifier senses the bit line voltage of 1T FeFET memory. Therefore, the reference celt is not necessary compared to current sensing in 1T FeFET memory, The high noise margin is wider than the low noise margin in the first inverter because requires tile output of precharge type sense amplifier high sensitivity to transition of input signal. The precharge type sense amplifier has very simple structure and can sense the bit line signal of the 1T FeFET memory cell at low voltage.

  • PDF

Definition of Engine Component Performance Test Range of 75tf class Gas Generator Cycle Liquid Propellant Rocket Engine (75톤급 가스발생기 사이클 액체로켓엔진의 시험영역과 엔진 구성품 시험 영역의 결정)

  • Nam, Chang-Ho;Moon, Yoon-Wan;Seol, Woo-Seok
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.04a
    • /
    • pp.51-56
    • /
    • 2011
  • A test range for a 75tf class gas generator cycle liquid propellant rocket engine is defined. The engine system test range is defined by the performance variation during flight, the dispersion after engine calibration, and additional margin. The component development test range includes the operation range corresponding to the engine system test range and the component performance margin.

  • PDF

A Study on the Shock Analysis of Large Scale Antenna (대형 안테나의 충격해석에 관한 연구)

  • Shin, Geon-Ho;Hur, Jang-Wook
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.20 no.6
    • /
    • pp.26-32
    • /
    • 2021
  • The antenna is mounted on the vehicle and operated, so its components must be able to withstand the shock that may occur while driving. In this study, the stability of antenna mounted on the vehicle is verified through the connection between modal analysis and transient analysis. The shock data used was taken from MIL-STD-810H, METHOD 516.8. As a result of the analysis of antenna, the maximum equivalent stress 169.49MPa and minimum margin of safety 2.31 has occurred on the bracket of antenna. Thus, it was found that the antenna has enough stability during the operation.

A Study on the Random Vibration Analysis of Large Scale Antenna (대형 안테나의 Random Vibration 해석에 관한 연구)

  • Shin, Geon-Ho;Hur, Jang-Wook
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.20 no.6
    • /
    • pp.44-50
    • /
    • 2021
  • This study analyzed the stability of antenna equipped on vehicles by the link of modal analysis and random vibration analysis with the vibration data of MIL-STD-810H, METHOD 514.8. As a result of the random vibration analysis of antenna, the maximum equivalent stress 41.9MPa and minimum margin of safety 8.37 was generated in the bracket of antenna by the vertical direction vibration. Thus, it was found that antenna has enough stability during the operation.

Experimental investigation of Scalability of DDR DRAM packages

  • Crisp, R.
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.17 no.4
    • /
    • pp.73-76
    • /
    • 2010
  • A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

The Effectiveness of Mapping Biopsy in Patients with Extramammary Paget's Disease

  • Kim, Byung Jun;Park, Shin Ki;Chang, Hak
    • Archives of Plastic Surgery
    • /
    • v.41 no.6
    • /
    • pp.753-758
    • /
    • 2014
  • Background Extramammary Paget's disease (EMPD) is an intraepithelial carcinoma usually occurring on the skin or mucosa of the perineum. Clinically, it resembles eczema or dermatitis, and misdiagnosis and treatment delays are common. The treatment of choice for EMPD is a wide excision with adequate margins. Wide excision with intraoperative frozen biopsy and Mohs micrographic surgery are common methods; however, these are associated with a high recurrence rate and long operation time, respectively. Methods Between January 2010 and June 2013, 21 patients diagnosed with EMPD underwent mapping biopsy. Biopsy specimens were collected from at least 10 areas, 2 cm from the tumor margin. When the specimens were positive for malignancy, additional mapping biopsy was performed around the biopsy site of the positive result, and continued until no cancer cells were found. Based on the results, excision margins and reconstruction plans were established preoperatively. Results The patients (18 male, 3 female) had a mean age of 66.5 years (range, 50-82 years). Almost all cases involved in the perineal area, except one case of axillary involvement. Permanent biopsy revealed one case (4.8%) of positive cancer cells on the resection margin, in which additional mapping biopsy and re-operation was performed. At the latest follow-up (mean, 27.4 months; range, 12-53 months), recurrence had not occurred. Conclusions Preoperative mapping biopsy enables accurate resection margins and a preoperative reconstructing plan. Additionally, it reduces the operation time and risk of recurrence. Accordingly, it represents an effective alternative to Mohs micrographic surgery and wide excision with intraoperative frozen biopsy.

Clinical Experience of Cryptopenis (함몰음경의 치험례)

  • Kim, Seok Kwun;Moon, Joo Bong;Heo, Jeong;Kwon, Yong Seok;Sohn, Ho Sung;Lee, Keun Cheol
    • Archives of Plastic Surgery
    • /
    • v.35 no.5
    • /
    • pp.619-621
    • /
    • 2008
  • Purpose: By virtue of good nourishment, obese boys are increasing in Korea, which may result in prevalence of cryptopenis. As milieu of economy, culture, and society changes, increased attention to the external genitalia in children should encourage surgeon to do assertive treatment for cryptopenis. But various operative methods have been devised yet to need sophistication and revision. The author performed suprapubic lipectomy and operation according to the modification of the Johnston's principle. Methods: The patient was 5 years old, 32 kg, and 122 cm. He had no pain or tenderness. The operation was done under general anesthesia. It was done with excision of suprapubic fat, cutting of retracted dartos fascia instead of removing the fascia around penile base, and anchoring of dermis and the cutting margin of the fascia to the underlying fascia such as Buck's fascia, tunica albuginea and rectus fascia at penile base. And then circumcision was performed. Results: Postoperative complication was not observed. The clinical result of the operation was satisfactory to both surgeon and parents of the patient. Conclusion: Suprapubic lipectomy and anchoring of dermis and retracted cutting dartos fascia margin to the underlying fascia in all directions at the penile base through a single suprapubic incision provide this patient with complacency.

Factors Affecting the Operating Performance of General Hospitals (종합병원 수익성에 미치는 영향요인 분석)

  • Kim, Ji-Hyoung;Ha, Ho-Wook;Lee, Hae-Jong;Sohn, Tae-Yong
    • Korea Journal of Hospital Management
    • /
    • v.10 no.3
    • /
    • pp.45-66
    • /
    • 2005
  • The purpose of this study was to analyze related factors affecting profitability on general hospitals(300-499 beds). The data were derived from survey by the Korean Hospital Association on 33 hospitals during 10 years (from 1993 to 2002). Profitability was measured by 3 ratios - net profit to total assets, normal profit to total assets and operating margin to gross revenue - as dependent variables. Independent variables were classified by general factors (ownership, number of bed, period of establishment, region), financial factors (total asset turnover, current ratio, liabilities to total assets, personnel costs per operation profit, material costs per operation profits), productivity index(number of daily patient per nurse), the score of quality assurance activity and the time lag score. Multiple regression model was used in this study. First, Number of bed, region was not statistically significant for profitability. But ownership was affect positively to normal profit to total assets and operating margin to gross revenue. Private hospitals had higher profitability than that of public hospitals Second, the score of quality assurance activity was not statistically significant to profitability. Third, Those hospitals having more daily patient per nurse had significantly higher profitability than the others. Fourth, Those hospitals having higher proportion in total asset turnover had significantly higher profitability than other hospitals. But liabilities to total assets and liquidity ratio had no difference to the profitability. Those hospitals having higher proportion in personnel costs and material costs per operation profits had significantly lower hospital profitability than others.

  • PDF

The properties of Sb-doped $Ge_{1}Se_{1}Te_{2}$ thin films application for Phase-Change Random Access Memory (상변화 메모리 응용을 위한 Sb-doped $Ge_{1}Se_{1}Te_{2}$ 박막의 특성)

  • Nam, Ki-Hyeon;Choi, Hyuk;Ju, Long-Yun;Chung, Hong-Bay
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.1329-1330
    • /
    • 2007
  • Phase-change random access memory(PRAM) has many advantages compare with the existing memory. For example, fast programming speed, low programming voltage, high sensing margin, low power consume and long cyclability of read/write. Though it has many advantages, there are some points which must be improved. So, we invented and studied new constitution of $Ge_{1}Se_{1}Te_{2}$ chalcogenide material. Actually, the performance properties have been improved surprisingly. However, crystallization time was as long as ever for amorphization time. In this paper, we studied in order to make set operation time and reset operation voltage reduced. In the present work, by alloying Sb in $Ge_{1}Se_{1}Te_{2}$. we could confirm that improved its set operation time and reset operation voltage. As a result, the method of Sb-alloyed $Ge_{1}Se_{1}Te_{2}$ can be solution to decrease the set operation time and reset operation voltage.

  • PDF