• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.229-244
• /
• 1998

This study was performed to determine proper fan and heater management schemes for natural air drying of rough rice in round steel bin with stirring device under Korean weather conditions. A computer simulation model was developed to predict moisture content changes, energy requirements, and drymatter losses during drying of rough rice by natural air. Drying test was conducted to validate the simulation model using round steel bin of holding capacity of 300ton at Rice Processing Complex in Jincheon. The bin was filled with rough rice every day and mixing by stirring device. Moisture contents, ambient air temperatures, relative humidities, static pressures in plenum chamber in the bin, airflow rates, and electrical and fuel energy were measured. Relative errors of moisture content changes predicted by the simulation model were below 5ft, and relative errors of final moisture content, final grain weight, required energy ranged from 0.9% to 6%. These not levels indicated that the simulation model can satisfactorily predict the performance factors of natural air drying system such as drying rates and energr consumptions comparing error level of 10% to 15% in other drying simulation models generally used in dryer desists. Twelve different fan and heater management schemes were evaluated using the computer simulation model based on three hourly weather data from Suweon for the period of 1952-1994. The best management schemes were selected comparing the drymatter losses, required drying times, required energy consumptions. Operating fan without heating only when ambient relative humidity was below 85% or 90% appeared to be the most effective method of In operation in favorable drying weather. Under adverse drying climates or to reduce required drying time, operating fan continuously, and heating air with $1.5^{\circ}C$ temperature rise only when ambient relative humidity was over 85% appeared to be the most suitable method.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.122-127
• /
• 2017

The data link layer operates reliable internode communication in the OSI reference model. Generally, the forward error correction (FEC) method is used in the data link layer of the wireless sensor network (WSN) environment that has a high frequency of errors. However, the FEC method consumes a significant amount of energy due to its high error correction rate, which negatively affects the networks' lifespan. In contrast with battery-based technology, energy is regularly recharged in the solar-powered WSN to meet higher energy needs than required for basic operation of existing nodes. By efficiently utilizing this surplus energy, the proposed energy-aware FEC method can reduce the data loss rate with no decrement of the network lifetime. The method employs a trade-off relationship between the energy and data loss rate by adjusting the parity length in the FEC method to the energy state in each node. The performance of the proposed scheme was verified through a simulation.

• Journal of KIISE:Databases
• /
• v.37 no.6
• /
• pp.292-299
• /
• 2010

Recently, as flash memory is used as digital storage devices, necessity for digital forensics is growing in a flash memory area for digital evidence analysis. For this purpose, it is important to recover crashed files stored on flash memory efficiently. However, it is inefficient to apply the hard disk based file recovery techniques to flash memory, since hard disk and flash memory have different characteristics, especially flash memory being unable to in-place update. In this paper, we propose a flash-aware file recovery technique for digital forensics. First, we propose an efficient search technique to find all crashed files. This uses meta-data maintained by FTL(Flash Translation Layer) which is responsible for write operation in flash memory. Second, we advise an efficient recovery technique to recover a crashed file which uses data location information of the mapping table in FTL. Through diverse experiments, we show that our file recovery technique outperforms the hard disk based technique.

• Journal of Service Research and Studies
• /
• v.4 no.2
• /
• pp.85-95
• /
• 2014

This research was tried for developing the model on the service science research scope. The suggested model is composed as 3 layer dimensional reference model. The first axis is on the perspective of service life cycle. Another second axis is on the service research characteristics or types. And last axis is also on the service systems. At here, service life cycle is related to service strategy, service development, and service implementation of operation. The service research characteristics or types is related to service basic research, service application research, and service convergence research. Lastly, the service systems is related to the needs analysis, service competence and service resources. This model can be applicable to include the various research topic or theme related on the service sciences. In the future, some enhanced models from researchers or practices from service providers, related on the service science research scope, are expected.

• Journal of Chest Surgery
• /
• v.40 no.7 s.276
• /
• pp.520-522
• /
• 2007

Bronchogenic cysts are usually located in the pulmonary parenchyma or mediastinum. When they are located in the mediastinum, they are usually near the bronchus or esophagus, but they are rarely at an intramural location of the esophagus. It is very difficult to differentiate between bronchogenic cyst and esophageal cyst before the operation. We report here on a patient for whom the preoperative diagnosis was supposed to be an esophageal cyst. The esophageal cyst was excised through the longitudinal division of the esophageal muscular layer without injury of the mucosa after right thoracotomy. The pathologic report revealed intramural bronchogenic cyst. We report here of a case of bronchogenic cyst that was located in the muscle layer of the lower esophagus.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.509-514
• /
• 2003

Mach-Zehnder interferometric wavelength converters with monolithically integrated semiconductor optical amplifiers (SOA's) have been fabricated and characteristics of wavelength conversion at 10 Gb/s have been investigated for wavelength span of 40 nm. The devices have been achieved by using a butt-joint combination of buried ridge structure type SOA's and passive waveguides. In the integration, a new method has been applied that removes p+InP cladding layer leading to high propagation loss and forms simultaneously the current blocking and the cladding layer using undoped InP. The module packaging has been achieved by using a titled fiber array for effective coupling into the tilted waveguide in the wavelength converter. Using the module, wavelength conversion with power penalty lower than 1 ㏈ at 10 Gb/s has been demonstrated for wavelength span of 40 nm. In addition, it is show that the module can provide 2R (re-amplification, re-shaping) operation by demonstrating the conversion with the negative penalty.

• Membrane and Water Treatment
• /
• v.3 no.3
• /
• pp.169-179
• /
• 2012

One of the major limitations in the use of commercial aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes is to maintain high performance over a long period of operation, due to the sensitivity of polyamide (PA) skin layer to oxidizing agents, such as chlorine, even at very low concentrations in feed water. This article reports surface modification of a commercial TFC RO membrane (BW30-Dow Filmtec) by covering it with a thin film of poly(vinyl alcohol) (PVA) crosslinked with glutaraldehyde (GA) to improve its resistance to chlorine. Crosslinking reaction was carried out at 25 and $40^{\circ}C$ by using PVA 1.0 wt.% solutions at different GA/PVA mass ratio, namely 0.0022, 0.0043 and 0.013. Water swelling measurements indicated a maximum crosslinking density for PVA films prepared at $40^{\circ}C$ and GA/PVA 0.0043. ATR-FTIR and TGA analysis confirmed the reaction between GA and PVA. SEM images of the original and modified membranes were used to evaluate the surface coating. Chlorine resistance of original and modified membranes was evaluated by exposing it to an oxidant solution (NaClO 300 mg/L, NaCl 2,000 mg/L, pH 9.5) and measuring water permeability and salt rejection during more than 100 h period. The surface modification effectively was demonstrated by increasing the chlorine resistance of PA commercial membrane from 1,000 ppm.h to more than 15.000 ppm.h.

• Clean Technology
• /
• v.17 no.2
• /
• pp.103-109
• /
• 2011

The process optimization was carried out to improve the throwing power (TP) and the thickness uniformity of the electroless copper (Cu) plating, which plays a seed layer for the subsequent electroplating. The DOE (design of experiment) was employed to screen key factors out of all available operation parameters to influence the TP and thickness uniformity the most. It turned out that higher Cu ion concentration and lower plating temperature are advantageous to accomplish uniform via filling and they are accounted for based on the surface reactivity. To visualize what occurred experimentally and evaluate the phenomena qualitatively, the kinetic Monte Carlo (MC) simulation was introduced. The combination of neatly designed experiments by DOE and supporting theoretical simulation is believed to be inspiring in solving similar kinds of problems in the relevant field.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.71-77
• /
• 2017

Virtual advertisement is an advertising technique that using computer graphic in a media production such as a sports image for inserting product image, logo, advertising slogan, etc. Recently, the image insertion of virtual advertisement is actively spreading due to the satisfaction of technical element for the image insertion of virtual advertisement in sports advertisement by increasing of the image processing technology and the computing performance. In addition, image processing technology for automatic insertion has become an important research field in the virtual advertisement field. In this paper, we propose the method of extracting less-informative region by using image processing technique and machine learning to insert a virtual advertisement automatically in sports image. The proposed method analyzes the brightness level of image through the histogram and extracts the less-informative region using the machine learning method.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.43-50
• /
• 2013

Recent researches on plant factory system deal with the convergence of lighting technology, agricultural technology inclusive to the high-tech industries worldwide in order to respond to the decreasing crop harvest due to global warming and abnormal weather phenomena. However, the fundamental performance standard is not currently being introduced in the case of plants factory and its commercialization is not activated because of high initial investment and operating cost. Large portion of the initial investment and operating cost of a plant factory is ascribed to artificial light sources and thermal control facilities, therefore, innovation should be provided in order to improve the economics of the plant factory. As an alternative, new plant factory could harness solar thermal and geothermal systems for heating, cooling and ventilation. In this study, a natural light dependent multi-layer plant factory's thermal environment was analyzed with two-dimensional numerical methods to elicit efficient operation conditions for optimized internal physical environment. Depending on the supply air temperature and airflow rate introduced in the facility, the temperature changes around the crops was interpreted. Since the air supplied into the plant factory does not stay long enough, the ambient temperature predicted around the plating trays was not significantly different from that of the supplied air. However, the changes of airflow rate and air flow pattern could cause difference to the temperature around the planting trays. Increasing the amount of time of air staying around the planting trays could improve energy performance in case the thermal environment of a natural light based multi-layer plant factory is considered.