• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.131-134
• /
• 2000

Electroluminescent[EL] from conjugated polymers has recently received great attention because polymer light-emitting diodes[LEDs] clearly have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the electrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material In this paper, we fabricated the single layer EL device using poly(3-octylthiophene)[P3OT] as emitting material. The orange-red light was clearly visible in a dark room Maximum peak wavelength of EL spectrum saw at 640nm in accordance with photon energy 1.9eV. And we know that ionization energy of P3OT is 4.7eV from the cyclic voltammetry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.258-258
• /
• 2010

In this work, back bias effects in the program of the silicon-oxide-nitride-oxide-silicon (SONOS) cell using two-step pulse sequence, are investigated. Two-step pulse sequence is composed of the forward biases for collecting the electrons at the substrate terminal and back bias for injecting the hot electrons into the nitride layer. With an aid of the back bias for electron injection, we obtain a program time as short as 600 ns and an ultra low-voltage operation with a substrate voltage of -3 V.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.160.2-160
• /
• 2001

This paper presents an individual cylinder spark advance control strategy based upon the location of peak pressure (LPP) in spark ignition engines using artificial neural networks. The LPP is estimated using a feedforward multi-layer perceptron network (MLPN), which needs only five samples of output voltage from the cylinder pressure sensor. The cyclic variation of LPP restricts the gain of the feedback controller, and results in poor regulation performance during the transient operation of the engine. The transient performance of the spark advance controller is improved by adding a feedforward controller which reflects the abrupt changes of the engine operating conditions such as engine speed and manifold absolute pressure (MAP)...

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.295-298
• /
• 1999

AlGaAs/InGaAs power P-HEMTS (Pseudo-morphic High Electron Mobility Transistors) with 1.0-${\mu}{\textrm}{m}$ gate length for PCS applications have been fabricated. We adopted single heterojunction P-HEMT structure with two Si-delta doped layer to obtain higher current density. It exhibits a maximum current density of 512㎃/mm, an extrinsic transconductance of 259mS/mm, and a gate to drain breakdown voltage of 12.0V, respectively. The device exhibits a power density of 657㎽/mm, a maximum power added efficiency of 42.1%, a linear power gain of 9.85㏈ respectively at a drain bias of 6.0V, gate bias of 0.6V and an operation frequency of 1.765㎓.

• Archives of Plastic Surgery
• /
• v.33 no.4
• /
• pp.503-505
• /
• 2006

Purpose: Cutis verticis gyrata(CVG) is a morphologic syndrome, typically occurring on the scalp, characterized by varing development of permanent folds and furrows conferring a corrugated or convoluted appearance which resembles the outer surface of the cerebrum. Cutis verticis gyrata can be categorized into primary and secondary types according to various etiologic factors and associated conditions which cause disease process. Methods: We report a case of essential primary cutis verticis gyrata in a 24-year-old male who did not have any other underlying or associated conditions. Results: After we made an incision to the galea aponeurotica of patient's scalp four times under local anesthesia, we dissected along the subapponeurotic layer and adjusted the flaps each other, and then sutured the flap. Conclusion: After the operation, the clear margin disappeared and it did not recur.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.240-248
• /
• 2004

Recently, the customer's demands for automotive steel sheet have been diversified and sterned more. Therefore, as the tendency of auto industry light-weight, one among these requirements is the trend for high strength together with the thinness of automotive steel sheet. Because Mn added essentially in producing high strength steel sheet is bonded strongly with oxygen, the Fine oxidation layer was created at the welding face after the flash butt welding operated in entry section of pickling line. Thereby it was caused the crack or breakage of welding part in process of cold rolling. At this research, in order to protect the contact Mn with oxygen in atomosphere it was considered to fire oxygen with LNG and the related researches have been gone forward with the find out concrete and to apply them to operation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.355-358
• /
• 2002

A sediments are Integral called as gravel, sand, clay, mineral materials which are settling in bottom layer of reservoir, stream, and oceans from land. In practical problems relations of sediments are flood by decreed of flow capacity and down of water quality. Dredged sediments are composed with constructed material and variety of pollutant compounds. Therefore, it is very much of cost effects in nationally, if development for use of constructed material separated only constructed material within sediments. And it will be continue to the dredge operation of stream sediment for retrofit of water environment and sustainable's after the years. The following results could be obtained : In case of high concentration sediments, sample for design of CDF was shown property of flocculent settling. Assuming that average inflow rate is 1, 000㎥/hr, mean residence time( $T_{d}$), average ponding depth( $H_{pd}$ ), and design surface area for flocculent settling( $A_{df}$ ) were 5 hr, 0.6m, and 15, 750 $m^2$ respectivelyrespectivelyy

• Journal of Chest Surgery
• /
• v.28 no.10
• /
• pp.935-938
• /
• 1995

Two cases of severe caustic injury of the hypopharynx, esophagus, and stomach are presented. Restoration of digestive continuity was accomplished by retrosternal isoperistaltic interposition of the transverse and left colon on the post-injury 73rd and 66th day respectively. The upper oro-colon continuity was made by a cervical approach, a vertical incision at the posterior hypopharyngeal wall, and interrupted one-layer sutures using 3-0 Dacron suture materials. The distal continuity was made by colojejunostomy between the transposed colon and proximal jejunum. There was no event after the operation in both cases. The posterior vertical hypopharyngotomy and hypopharyngocolostomy at the early post-injury period may be the preferred procedure to obtain normal deglutition in patients with esophageal stricture associated with hypopharyngeal injury.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.119-125
• /
• 1995

Strained multiple quantum well(SMQW) PBH-DFB-LDs emitting at 1.55$\mu$m wavelength has been fabricated using OMVPE and LPE crystal growth tecnique. Using the SMQW active layer, a linewidty enhancement factor of 2.65 was obtained at lasing wavelength and consequnently, packaged 42 modules showed a very low average chirp of 0.44nm at 2.5Gbps NRZ direct modulation. The 77 devices showed average threshold current of 8.72mA and average slope efficiency of 0.181 mW/mA, and single longitudinal mode operation with SMSR larger than 30dB up to 5mW. Among the 77 devices, standard deviation of lasing wavelength of 3.57nm was obtained owing to a good crystal growth uniformity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.111-114
• /
• 2003

Compared to a conventional atomic layer deposition (ALD) grown Al203 film, Plasma enhanced ALD (PEALD) grown AION film was revealed to possess a large breakdown field, which is necessary for stable operation of thin film electroluminescent (TFEL) device. Also, AION is more stable than Al203 films grown by PEALD or by ALD after post-annealing process, which is inevitably required to improve luminance property of phosphor. Furthermore, AION films were applied to insulators of ZnS:Tb TFEL device. Resultant1y, they show better stability than ALD grown insulators under high electric field.