• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.225-229
• /
• 2021

Commercially available continuous glucose sensors require the operation stability for more than two weeks. Typically, the sensor comprises a sensing layer and an over-coating layer for the stable operation inside the body. In the sensing layer, enzymes and mediators are cross-linked together for the effective sensing of the glucose. The over-coating layer limits the flux of glucose and works as a biocompatible layer to the body fluids. Here, we report the simple preparation of the flux-limiting layer by the condensation of polyethyleneimine (PEI), tri-epoxide linker, and trimethylolpropane triglycidyl ether (PTGE). The sensor is constructed by a layer-by-layer drop-coating of the sensing layer containing glucose dehydrogenase and the PEI-derived blocking layer. It is stable for more than 14 days, which is enough for the sensor in the continuous monitor glucose monitoring (CGM) system.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.311-317
• /
• 2010

This paper deals with operation characteristics of a written-pole motor (WPM), having that of a permanent magnet (PM) synchronous motor and induction motor at once. The WPM also has a magnet layer on the surface of the rotor and the exciter pole that is a device to make the magnet layer magnetized during the operation. This study, introducing a fundamental structure and operation characteristics of a single-phase WPM, proposes a initial design method. With those ground, a 130W, single-phase WPM that is designed for a home appliance is presented and verified with a performance through the experiment.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.167-173
• /
• 2014

A novel multi-oxide layer structure for vertical cavity surface emitting laser (VCSEL) structures is proposed to achieve higher single mode output power. The structure has four oxide layers with different aperture sizes and thicknesses. The oxide layer thicknesses are optimized simultaneously to reach the highest single mode output power. A heuristic method is proposed for plotting the influence of these variable changes on the operation of optical output power. A comprehensive optical-electrical thermal-gain self-consistent VCSEL model is used to simulate the continuous-wave operation of the multi-layer oxide VCSELs. A comparison between optimized VCSELs with different structures is presented. The results show that by using multi-oxide layers with different thicknesses, higher single-mode optical output power could be achieved in comparison with multi-oxide layer structures with the same thicknesses.

• 정보과학회 논문지
• /
• 제43권2호
• /
• pp.256-268
• /
• 2016

이기종의 다양한 장비로 구성된 현대의 네트워크는 분산 설치되어 있고, 이를 중앙 집중적이면서 효율적으로 관리하기 위해서 NETCONF 표준이 제정되었다. 본 논문에서는 NETCONF의 각 계층에 대해 개선한 연구를 포함하여 하나의 시스템으로 통합하는 작업을 수행하였다. RPC 계층에서는 멀티스레드를 사용하여 비동기 통신 채널 및 병렬 처리가 가능하도록 하였고, Operation 계층에서는 장비 설정 데이터 간 종속성을 이용한 데이터 그룹을 활용하여 연산의 효율성을 증가시켰다. Operation 계층과 연동할 수 있도록 Content 계층에서의 설정 데이터 모델링 기법에 대해서도 제시하였다. 마지막으로 GUI 프로그램을 구현하고 구현 결과를 나타내었다. 개선된 NETCONF와 표준 NETCONF를 질의 처리율, 질의 처리 속도, CPU 사용률에 대해 비교하는 실험을 수행한 결과 질의 처리율과 처리 속도에서는 개선된 NETCONF가, CPU 사용률에서는 표준 NETCONF가 우수하였다.

• 한국지능시스템학회논문지
• /
• 제13권6호
• /
• pp.692-697
• /
• 2003

지난 몇 년 동안 인터넷기반 원격제어 연구에 대한 관심이 높아지고 있다. 본 논문에서는 인터넷기반 원격 제어시스템을 구현한다. 로봇의 주변환경 및 제어 정보를 강인하게 전송하기 위하여 데이터를 패킷 형태로 만든다. 또한 매우 큰 용량을 갖는 영상 데이터를 전송하기 위하여 JPEG 압축 알고리즘을 이용한다. 인터넷 기반 원격제어의 주된 문제점은 데이터 전송 지연 또는 데이터 손실이다. 이러한 특수한 문제를 해결하기 위하여 2-layer fuzzy controller를 장착한 자율이동로봇을 소개한다. 그리고, 컬러 인식 시스템을 구현하여 로봇을 물체를 인지할 수 있도록 하였다. 다양한 입력 센서가 장착된 로봇에 2-layer fuzzy controller를 적용하여 그 효율성을 입증한다. 2-layer fuzzy controller는 다양한 입력과 출력을 갖는 로봇을 강인하게 제어할 수 있고 제어 비용도 낮기 때문에 그것이 다양한 분야에 적용되어 질 것으로 기대된다.

• 한국임상수의학회지
• /
• 제18권2호
• /
• pp.124-132
• /
• 2001

The purpose of this study is to know whether single layer continuous connell suture is an acceptable alternative to simple interrupted approximating suture for end-to-end intestinal anastomosis in dogs. Fourteen mixed-breed dogs weighing 2 to 5 kg were allotted to group treated with simple interrupted approximating suture (Group I) and group treated with single layer continuous Connell suture (Group II), each of 7 dogs. All dogs in each suture pattern were compared with time for total operation ad suture elapsed for intestines to anastomose, clinical signs, changing of pre-and postoperative luminal size, status of feces, adhesion at anastomotic site for 14 days after operation. Time for total operation and suture time for intestinal anastomosis were none significant between Group I and Group II, although those in Group II was about 3 minutes shorter than those in Group I, respectively. Group I spent average 47.08${\pm}$11.10 minutes on total operation, 20.97${\pm}$5.54 minutes on suture time for intestinal anastomosis and Group II spent average 44.74${\pm}$7.77 minutes, 17.73${\pm}$3.05 minutes, respectively. All dogs were no special differences in vitality, vomiting, appetite between Group I and Group II for 14 days after operation. All dogs, except one dog in Group I, had showed normal vitality and appetite since 6~8 days after operation. Initial return of fecal passage showed in all dogs before 6 days after operation and thereafter most dogs showed normal feces. According to results, it was thought that all dogs with normal vitality and appetite before 8 days had showed good prognosis. There were no changes of intestinal luminal size in 2 dogs performed Group In and one dog performed Group II between at operation and 14 days after operation. Narrowing rate of intestinal lumen in Group I was average 9.3% of the normal diameter, whereas in Group II, 9.5% of normal diameter. In complications after operation, only one dog in Group I showed intestinal intussusception but the others didn't. Length of adhesion was measured between intestinal anastomotic site and omental graft. Length of adhesion in dogs performed Group II was mostly shorter than that of Group I. Adhesion with proximate intestines occurred in five dogs, which consisted of 3 dogs performed Group I and 2 dogs performed Group II. Concurrently, they had a great length of adhesion between anastomotic site and omental graft. There were no great differences between Group I and Group II about speed of operation, clinical signs, complications such as leakage and stricture. And all dogs performed intestinal anastomosis showed good clinical condition and prognosis. In conclusion, Single layer continuous Connell suture can safely perform an intestinal anastomosis and be an alternative of simple interrupted approximating suture in aspect of speed clinically.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1552-1559
• /
• 2021

Convolution neural networks (CNNs) show notable performance in image processing and are used as representative core models. CNNs extract and learn features from large amounts of train dataset. In general, it has a structure in which a convolution layer and a fully connected layer are stacked. The core of CNN is the convolution layer. The size of the kernel used for feature extraction and the number that affect the depth of the feature map determine the amount of weight parameters of the CNN that can be learned. These parameters are the main causes of increasing the computational complexity and memory usage of the entire neural network. The most computationally expensive components in CNNs are fully connected and spatial convolution computations. In this paper, we propose a Fourier Convolution Neural Network that performs the operation of the convolution layer in the Fourier domain. We work on modifying and improving the amount of computation by applying the fast fourier transform method. Using the MNIST dataset, the performance was similar to that of the general CNN in terms of accuracy. In terms of operation speed, 7.2% faster operation speed was achieved. An average of 19% faster speed was achieved in experiments using 1024x1024 images and various sizes of kernels.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권5호
• /
• pp.1761-1777
• /
• 2021

An image with infrared features and visible details is obtained by processing infrared and visible images. In this paper, a fusion method based on Laplacian pyramid and generative adversarial network is proposed to obtain high quality fusion images, termed as Laplacian-GAN. Firstly, the base and detail layers are obtained by decomposing the source images. Secondly, we utilize the Laplacian pyramid-based method to fuse these base layers to obtain more information of the base layer. Thirdly, the detail part is fused by a generative adversarial network. In addition, generative adversarial network avoids the manual design complicated fusion rules. Finally, the fused base layer and fused detail layer are reconstructed to obtain the fused image. Experimental results demonstrate that the proposed method can obtain state-of-the-art fusion performance in both visual quality and objective assessment. In terms of visual observation, the fusion image obtained by Laplacian-GAN algorithm in this paper is clearer in detail. At the same time, in the six metrics of MI, AG, EI, MS_SSIM, Q_abf and SCD, the algorithm presented in this paper has improved by 0.62%, 7.10%, 14.53%, 12.18%, 34.33% and 12.23%, respectively, compared with the best of the other three algorithms.