• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.347-350
• /
• 2018

In order for an IoT system to automatically make the house temperature pleasant for the user, the system needs to predict the optimal start-up time of air-conditioner or heater to get to the temperature that the user has set. Predicting the optimal start-up time is important because it prevents extra fee from the unnecessary operation of the air-conditioner and heater. This paper introduces an ANN(Artificial Neural Network) and an IoT system that predicts the cooling and heating time in households using air-conditioner and heater. Many variables such as house structure, house size, and external weather condition affect the cooling and heating. Out of the many variables, measurable variables such as house temperature, house humidity, outdoor temperature, outdoor humidity, wind speed, wind direction, and wind chill was used to create training data for constructing the model. After constructing the ANN model, an IoT system that uses the model was developed. The IoT system comprises of a main system powered by Raspberry Pi 3 and a mobile application powered by Android. The mobile's GPS sensor and an developed feature used to predict user's return.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.356-362
• /
• 2011

Usually urban railways are built under ground thus the necessary condition of urban railroad, a linear-shaped track, causes a difficulty in enhancement of speed limits of urban rail. Also the underground construction of city railroad produces speed limit values reduced according to a speed code array, in case of speed decision according to the conventional block section division, thus onventionally it could not but apply speed limit values lower than actual safety speeds. In this study, The above two facts induced the author to study on a method to enhance speed limit values for CBTC within existing urban railroad sectors. Since it is possible to exchange data continuously and to control speeds in case of railroads based on CBTC, the author applied result values of speed limits, which were gained based on a railroad condition, a linear track, to the CBTC system without correction of the result values and then the author compared and analyzed, through simulation, the running times and the efficiencies of running energies between railway stations, between the existing fixed-block system and the CBTC system. As a result simulation, the improvement of speed and the deceleration distance of reduction confirmed that it was effective to reduce the time to travel between stations. A fixed block the set of constraints on the speed limit, he way the operation is optimized based CBTC speed limit by suggesting ways to reset the scheduled speed measures to improve were extracted.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1509-1517
• /
• 2013

So far, most studies associated with soil carbon sequestration have been focused on long term aspect. However, information regarding soil carbon sequestration in short term aspect is limited. This study was conducted to determine changes of soil organic carbon content and stability of carbon in response to compost application rate and tillage management during rice growing season(150 days) in short term aspect. Under pot experiment condition, compost was mixed with an arable soil at rates corresponding to 0, 6, 12, and 24 Mg/ha. To determine effect of tillage on soil carbon sequestration, till and no-till treatments were set up in soils amended with application rate of 12 Mg/ha. Compost application and tillage management did not significantly affect soil organic carbon(SOC) content in soil at harvest time. Bulk density of soil was not changed significantly with compost application and tillage management. These might result from short duration of experiment. While hot water extractable organic carbon(HWEOC) content decreased with compost application, humic substances(HS) increased. Below ground biomass of rice increased with application of compost and till operation. From the above results, continuos application of compost and reduce tillage might improve increase in soil organic carbon content and stability of carbon in long term aspect.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1523-1531
• /
• 2015

Small boat operator's certificate of competency took up 39.0% of total license holders and required for at least 19,000 boats in 2013, was proposed the improvement items by reviewing the acts and criteria related to the current test and analyzed the questions of set at examinations. About 31% of questions of the current written test are unsuitable for the target boat and operational knowledge of the operator. It is appropriate that the subject categorization criteria and contents of the subjects will be improved to include practical details related to safe ship operation, and the number of questions increased according to each subject category in amended examination after January 1st, 2017. The interview test should be improved so that the questions can be forwarded in a clear manner through formulation of practical problems, photos, etc. considering the real situations such as high age/low education status of testee and it is necessary to lengthen the interview time per testee. The test and interview personnel should consist of a human resource pool with experience in small boat operator training and workers of related areas familiar with field terminology. Furthermore, the test should be divided into small boats of 2 to 5 tons and those exceeding 5 tons according to the tonnage of small boats.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.

• Tunnel and Underground Space
• /
• v.2 no.1
• /
• pp.116-122
• /
• 1992

A comprehensive, nonsteady state, computer simulation program for the environmental conditions in advancing tunnels (the HEADSIM simulation program) is constructed and successfully validated with heat balance amongst all heat sources, and with mass conservation amongst various airflows including the leakage air from ducts, under timedependent variations of inlet air conditions. which include sudden, diurnal and seasonal changes. Heat conduction in the wall strata and face strata is simulated with most complicated boundary conditions using the finite difference method, and the climatic conditions in roadway sections which contain air ducts, booster fan, spray cooler, compressed air pipes, cold water pipes, return water pipes, machinery and broken rock are simulated taking into account the variations of face operation and the heat storage mechanism in the strata. The limitations of simulation time steps and roadway section lengths are defined according to the stability criteria satisfying the principles of thermodynamics. Variations of heat transfer coefficients, which are newly set, and those of wetness factors are taken into account according to the variations of other parameters and the stepwise advance of the face. Newly-derived formulae are used for computing the air duct leakage and the pressure inside of the duct. A new concept of an 'imaginary duct' is introduced to simulate the climatic conditions in tunnels during holiday periods, which directly affect conditions on subsequent working days under the consideration of natural convection. A subsidiary program (the WALLSIM simulation program) is made to compute the dimensionless tunnel surface temperatures and to compare the results with those from analytical approaches, and to demonstrate the stability, convergence and accuracy of the strata heat conduction simulation, adopting the finite difference method. The WALLSIM also has wide applications, including those for the computation of age coefficients.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.1-12
• /
• 2007

The objective of Bus Information System developed as a part of the ITS, provides the operation information of buses to passengers and managers. The system uses roadside antennas (reading electronic tags on board buses) to enable wireless communication each other and radio data communication to deliver information about buses and their locations. This information is used to estimate the arrival time of the bus which will be shown on the bus stop message board or via internet. Bus Information System or Bus Management System (BMS) is going ahead and set up in many local governments, and recently quality improvement of the BIS is considered as a very important element in expanding of business or management. Therefore this research wished to contribute rationalization of the system by maintaining optimum quality. An gang was chosen to apply overall quality control process and will be evaluated in terns of its propriety and performance. This study has led the improvement of service and promote the use of public transits, which is the best way to solve the city traffic problem by effective management of public transits.

• Journal of Global Scholars of Marketing Science
• /
• v.7
• /
• pp.209-238
• /
• 2001

Objectives of this study were: First, to review the effect of buyer position in power retailer on job performance and store performance. Second, to set up research model specifying relationships between the PAQ dimensions of retailer's buyer, job performance and store performance. Third, to test hypotheses derived from the research model of this study and to establish strategy for managing discount store and department store. Marketing Implications of this study were: First, buyers of power retailers should respond more actively to rapidly changing purchasing situation. Second, job content of buyers in power retailers can be redesigned based upon results of this study. Third, as the size and the length of operation of retailers increase, an innovative system should be invented to enhance the effectiveness of power retailers. Limitations of this study were: First, validity and reliability of data collection methods used in this study were questionable for the lack of past researches in Korea. Second, static research method was employed in this study. Generalization over different time interval was almost impossible from results of this study.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.300-309
• /
• 2017

The productivity, cost, and optimal forest road network density for tree-length yarding with K301-4 and HAM300 tower yarders were analyzed. The results showed that productivity decreased as the yarding distance increased. The productivity of the K301-4 was greater than that of the HAM300 as the maximum yarding distance was longer than 34 m. This difference increased as the load volume increased. As the K301-4 yarder had a higher purchase price and it took more time to set up compared to the HAM300, the HAM300 was cost effective. Therefore, in oder to introduce tower yarders to reduce operational cost, it is effective to increase the load volume during operations and to utilize the road network repeatedly for a long period.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.187-195
• /
• 2017

We have studied the efficient operation of the radar and the appropriateness of the installation location, when constructing the VTS system. As the Civil-Military Complex Harbour (Kangjeong Port) is completed in 2016, we set the control area within 10 nautical miles centering on Kangjeong Port, and found out and removed the operational radar blind area of VTS system to provide safe navigation information for vessels that navigating this area. Assuming that two international cruise ships entering at the same time, we performed the radar simulation and compared the images by considering the three sites of Kangjeong Port, Miaksan and Seoguipo Port. Simulation results for a single radar installed at Kangjung Port indicate that the blind area was largely affected by two large cruise ships and the surrounding islands. The blind area due to Kogunsan was considerably large when installed in Miaksan, but the blind area due to the influences of Beomseom, Moonseom and Seopseom was negligibly large. It seems that additional radar installation is necessary as a complementary solution to solve this blind area. When two radars were installed at Miaksan and Kangjeong Port, the residual blind area due to the Seopseom was $0.25km^2$ at 0.1~0.33 nautical miles in the southeast direction from Seopseom. In addition, the remaining blind area with two cruise ships mutually influenced was $0.18km^2$, which did not occur with a single cruise ship.