• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2010

Products companies, which manufactures finished goods with modular parts, will expect that the proper parts should be delivered to assembly line not only just in time (JIT) but also just in sequence (JIS) and also expect that faulty goods will not be produced due to the delivery of wrong parts. In order to satisfy the above requirements, recently Smart Pallet based Parts Delivery system (SPPD) was proposed. SPPD system can overcome the drawback of bar code based part delivery system in which much time for checking proper and in sequence parts is wasted due to labors' working in hand as well as the drawback of RFID based part delivery system in which recognition distance of RFID is very limited. In the paper, a PDA system is proposed and further implemented to maximize the efficiency of SPPD's operation as well as to manage the limited power of smart pallets efficiently.

• Archives of Craniofacial Surgery
• /
• v.19 no.1
• /
• pp.1-2
• /
• 2018

Theoretically, panfacial bone fractures involve all three areas of the face: frontal bone, midface, and mandible. In practice, when two out of these three areas are involved, the term "panfacial bone fracture" has been applied. We can use physical examination, simple radiologic examination, and computed tomography study for diagnosis. Linear fracture are treated by conservative treatment. But, most of panfacial bone fracture patients need to be treated by open reduction and internal fixation. Facial width is most important thing that we need to care during operation. There are many ways about sequence like "top to bottom," "bottom to top," "outside to inside," or "inside to outside" and the authors prefer "top to bottom" and "outside to inside" ways. The authors apply arch bar from the first of surgery and then, set frontal bone fracture, midface fracture and mandible fracture in sequence. Usually, we remove the stitches for 5 days after surgery and the intraoral stitch removed after 2 weeks. Usually arch bar is going to be removed 4 weeks after surgery. We could get acceptable results with the above way.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.373-379
• /
• 2012

This paper presents a fault location algorithm based on the adaptively estimated value of the local sequence source impedance for faults on a parallel transmission line. This algorithm uses only the local voltage and current signals of a faulted circuit. The remote current signals and the zero-sequence current of the healthy adjacent circuit are calculated by using the current distribution factors together with the local terminal currents of the faulted circuit. The current distribution factors consist of local equivalent source impedance and the others such as fault distance, line impedance and remote equivalent source impedance. It means that the values of the current distribution factors can change according to the operation condition of a power system. Consequently, the accuracy of the fault location algorithm is affected by the two values of equivalent source impedances, one is local source impedance and the other is remote source impedance. Nevertheless, only the local equivalent impedance can be estimated in this paper. A series of test results using EMTP simulation data show the effectiveness of the proposed algorithm. The proposed algorithm is valid for a double-circuit transmission line system where the equivalent source impedance changes continuously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1150-1156
• /
• 2009

In this paper, we propose the gradual encryption method of image using LFSR(Linear Feedback Shift Register) and 2D CAT(Two-Dimensional Cellular Automata Transform). First, an LFSR is used to create a PN(pseudo noise) sequence, which is identical to the size of the original image. Then the created sequence goes through an XOR operation with the original image resulting to the first encrypted image. Next, the gateway value is set to produce a 2D CAT basis function.The created basis function multiplied with the first encrypted image produces the 2D CAT encrypted image which is the final output. Lastly, the stability analysis verifies that the proposed method holds a high encryption quality status.

• Korean Journal of Microbiology
• /
• v.35 no.2
• /
• pp.121-127
• /
• 1999

An effective computer program for assembling fragments in DNA sequencing has been developed. The program, called SeqEditor (Sequence Editor), is usable on the pcrsonal computer systems of MS-Widows which is the mosl popular operating system in Korea. It c'm recd several sequence file formats such as GenBak, FASTA, and ASCII. In the SeqEditor program, a dynamic programming algorihm is applied to compute the maximalscoring overlapping alignment between each pjlr of fragments. A novel feature of the program is that SeqEdilor implemnents interaclive operation with a graphical user interface. The performance lests of the prograln 011 fragmen1 data from 16s and 18s rDNA sequencing pi-ojects produced saiisIactory results. This program may be useful to a person who has work of time with large-scale DNA sequencing projects.

• Nuclear Engineering and Technology
• /
• v.31 no.1
• /
• pp.68-79
• /
• 1999

The YGN Units 3&4 plant conditions during shutdown operation were reviewed to identify the possible event scenarios following the loss of shutdown cooling (SDC) event. For the five cases of typical reactor coolant system (RCS) configurations under the worst event sequence, such as unavailable secondary cooling and no RCS inventory makeup, the thermal hydraulic analyses were performed using the RELAP5/MOD3.2 code to investigate the plant behavior following the event. The thermal hydraulic analyses include the estimation of time to boil, time to core uncovery, and time to core heat up to determine the containment closure time to prevent the uncontrolled release of fission products to atmosphere. The result indicates that the containment closure is recommended to be achieved within 42 minutes after the loss of SDC for the steam generator (SG) inlet plenum manway open case or the large cold leg open case under the worst event sequence. The containment closure time is significantly dependent on the elevation and size of the opening and the SG secondary water level condition. It is also found that the containment closure needs to be initiated before the boiling time to ensure the survivability of the workers in the containment. These results will provide useful information to operators to cope with the loss of SDC event.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.108-115
• /
• 2014

Recently, Uninterruptible power supply(UPS) is spotlighted from concern about black out, due to reserve power problem caused by increased power consumption. When fault occurs on the grid, UPS system supplies power to loads instead of the grid. Also, it is an advantage of possible operation as Energy storage system(ESS). Bi-directional power control of AC/DC Pulse width modulation(PWM) converter is essential for grid-connected UPS system. And, mode transfer control has to be performed considering phase and dynamic characteristic under grid condition. In this paper, control of mode transfer and bi-directional power control of AC/DC PWM converter is proposed for UPS system. Also, it is verified by simulation and experimental results.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.468-478
• /
• 2002

In this paper, we designed a B-WLL MAC(Media Access Control) protocol and validated its operation for implementation of high-speed subscriber networks. Our MAC protocol was designed by SDL using the DAVIC specifications based upon the variable contention/reserved time slot allocation algorithm. For validation of our MAC protocol, Syntax and semantic error check were performed by the Simulation Builder of ObjectGeode and the MAC(Message Sequence Chart) respectively. The validation results showed that our B-WLL MAC protocol is working correctly and may successfully support B-WLL services.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.164-167
• /
• 2009

In this paper, we propose the image encryption using LFSR(Linear Feedback Shift Register) and 2D CAT(Two-Dimensional Cellular Automata Transform). First, a LFSR is used to create a PN(pseudo noise) sequence, which is identical to the size of the original image. Then, the created sequence goes through a XOR operation with the original image to convert the original image. Next, the gateway value is set to produce a 2D CAT basis function. Using the created basis function, multiplication is done with the converted original image to process 2D CAT image encipherment. Lastly, the stability analysis verifies that the proposed method holds a high encryption quality status.

• East Asian mathematical journal
• /
• v.35 no.2
• /
• pp.239-257
• /
• 2019

The purpose of this study is to show that the topology is closely related to some subjects learned in school mathematics and then to give motivations for learning of the topology. To do this, it is showed that the topology is an abstracted device that deal with structure of limit and continuity introduced in school mathematics. This study took a literature study. The results of this study are as follows. First, the formal definition of general topology to structure open sets was examined. The nearness relation together with the closure operation was introduced and used to characterize for construction of general topology. Second, as definitions for continuity of function, we considered the intuitive definition, definition, structured definitions using open intervals and definition using open sets and then we investigated their roles. We also examined equivalent definition using the nearness relation which is helpful to understand continuity of function. Third, the sequence and its limit are treated in terms of continuous functions having the set of natural numbers and its extended set as domains. From these, it can be concluded that the convergence of sequence and the continuity of function are identified as functions that preserve the nearness relation and that the topology is a specialized tool for dealing with convergence and continuity.