• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.101-109
• /
• 2009

Generally, depth cache and pixel cache of 3D graphics are designed by using write-back scheme for efficient use of memory bandwidth. Also, there are write after read operations of same address or only write operations are occurred frequently in 3D graphics cache. If a cache miss is detected, an access to the external memory for write back operation and another access to the memory for handling the cache miss are operated simultaneously. So on frequent cache miss situations, as the memory access bandwidth limited, the access time of the external memory will be increased due to memory bottleneck problem. As a result, the total performance of the processor or the IP will be decreased, also the problem will increase peak power consumption. So in this paper, we proposed a novel early write back cache architecture so as to solve the problems issued above. The proposed architecture controls the point when to access the external memory as to copy the valid data block. And this architecture can improve the cache performance with same hit ratio and same capacity cache. As a result, the proposed architecture can solve the memory bottleneck problem by preventing intensive memory accesses. We have evaluated the new proposed architecture on 3D graphics z cache and pixel cache on a SoC environment where ARM11, 3D graphic accelerator and various IPs are embedded. The simulation results indicated that there were maximum 75% of performance increase when using various simulation vectors.

• Spatial Information Research
• /
• v.12 no.1
• /
• pp.13-27
• /
• 2004

The current industrial development and the increase of population in Daecheong Reservoir basin have produced a rapid increase of wastewater discharge. This has resulted in problem of water quality control and management. Although many efforts have been carried out, reservoir water quality has not significantly improved. In this sense, the development of water quality management system is required to improve reservoir water quality. The goal of this study is to design a GIS-based water quality management system for the scientific water quality control and management in the Daecheong Reservoir. For general water quality analysis, WASP5 model was applied to the Daecheong Reservoir. A sensitivity analysis was made to determine significant parameters and an optimization was made to estimate optimal values. The calibration and verification were performed by using observed water quality data for Daecheong Reservoir. A water quality management system for Daecheong Reservoir was made by connecting the WASP5 model to ArcView. It allows a Windows-based Graphic User Interface(GUI) to implement all operation with regard to water quality analysis. The proposed water quality management system has capability for the on-line data process including water quality simulation, and has a post processor far the reasonable visualization for various output. The modeling system in this study will be an efficient NGIS(National Geographic Information System) far planning of reservoir water quality management.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.152-159
• /
• 2016

This paper describes an offset and 1/f noise cancellation technique based hall sensor signal processor. The hall sensor outputs a hall voltage from the input magnetic field, which direction is orthogonal to hall plate. The two major elements to complete the hall sensor operation are: the one is a hall sensor to generate hall voltage from input magentic field, and the other one is a hall signal process system to cancel the offset and 1/f noise of hall signal. The proposed hall sensor splits the hall signal and unwanted signals(i.e. offset and 1/f noise) using a spinning current biasing technique and chopper stabilizer. The hall signal converted to 100 kHz and unwanted signals stay around DC frequency pass through chopper stabilizer. The unwanted signals are bloked by highpass filter which, 60 kHz cut off freqyency. Therefore only pure hall signal is enter the ADC(analog to dogital converter) for digitalize. The hall signal and unwanted signal at the output of an amplifer and highpass filter, which increase the power level of hall signal and cancel the unwanted signals are -53.9 dBm @ 100 kHz and -101.3 dBm @ 10 kHz. The ADC output of hall sensor signal process system has -5.0 dBm hall signal at 100 kHz frequency and -55.0 dBm unwanted signals at 10 kHz frequency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.86-94
• /
• 2012

In this paper we propose a hardware architecture of high-speed CGH (computer generated hologram) generation processor, which particularly reduces the number of memory access times to avoid the bottle-neck in the memory access operation. For this, we use three main schemes. The first is pixel-by-pixel calculation rather than light source-by-source calculation. The second is parallel calculation scheme extracted by modifying the previous recursive calculation scheme. The last one is a fully pipelined calculation scheme and exactly structured timing scheduling by adjusting the hardware. The proposed hardware is structured to calculate a row of a CGH in parallel and each hologram pixel in a row is calculated independently. It consists of input interface, initial parameter calculator, hologram pixel calculators, line buffer, and memory controller. The implemented hardware to calculate a row of a $1,920{\times}1,080$ CGH in parallel uses 168,960 LUTs, 153,944 registers, and 19,212 DSP blocks in an Altera FPGA environment. It can stably operate at 198MHz. Because of the three schemes, the time to access the external memory is reduced to about 1/20,000 of the previous ones at the same calculation speed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2008

According to recent frequent local flash flood due to climate change, the very short-term rainfall forecast using remotely sensed rainfall like radar is necessary to establish. This research is to evaluate the feasibility of GIS-based distributed model coupled with radar rainfall, which can express temporal and spatial distribution, for multipurpose dam operation during flood season. $Vflo^{TM}$ model was used as physically based distributed hydrologic model. The study area was Yongdam dam basin ($930\;km^2$) and the 3 storm events of local convective rainfall in August 2005, and the typhoon.Ewiniar.and.Bilis.collected from Jindo radar was adopted for runoff simulation. Distributed rainfall consistent with hydrologic model grid resolution was generated by using K-RainVieux, pre-processor program for radar rainfall. The local bias correction for original radar rainfall shows reasonable results of which the percent error from the gauge observation is less than 2% and the bias value is $0.886{\sim}0.908$. The parameters for the $Vflo^{TM}$ were estimated from basic GIS data such as DEM, land cover and soil map. As a result of the 3 events of multiple peak hydrographs, the bias of total accumulated runoff and peak flow is less than 20%, which can provide a reasonable base for building operational real-time short-term rainfall-runoff forecast system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.43-51
• /
• 2008

In this paper, we are implemented low-power structure for Inter prediction, Intra prediction, Deblocking filter, Transform and Quantization blocks in H.264/AVC Encoder. The proposed Inter/Intra prediction blocks are shown 60.2% cell area reduction by adder reduction through Distributed Arithmetic, 44.3% add operation reduction using MUX for hardware share in Deblocking filter block. Furthermore we applied CSD and CSS process to reduce the cell area instead of multipliers that take a lot of area. The FPGA(Field Programmable Gate Array) and ARM Process based H.264/AVC encoder is implemented using proposed low power IPs. The proposed structure Platforms are implemented to interlock with FPGA and ARM processors. H.264/AVC Encoder implementation using Platforms shows that proposed low-power IPs can use H.264/AVC Encoder SoC effectively.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.223-229
• /
• 2018

Recently, the necessity of safety diagnosis of electrical devices has been increasing as the fire caused by electric devices has increased rapidly. This study is concerned with the safety diagnosis of electric equipment using intelligent Fuzzy technology. It is used as a diagnostic input for the multiple electrical safety factors such as the use current, cumulative use time, deterioration and arc characteristics inherent to the equipment. In order to extract these information in real time, a device composed of various sensor circuits, DSP signal processing, and communication circuit is implemented. The fuzzy logic algorithm using the Gaussian function for each information is designed and compiled to be implemented on a small DSP board. The fuzzy logic receives the four diagnostic information, deduces it by the fuzzy engine, and outputs the overall safety status of the device as a 100-step analog fuzzy value familiar to human sensibility. By experiments of a device that combines hardware and fuzzy algorithm implemented in this study, it is verified that it can be implemented in a small DSP board with human-friendly fuzzy value, diagnosing real-time safety conditions during operation of electric equipment. In the future, we expect to be able to study more intelligent diagnostic systems based on artificial intelligent with AI dedicated Micom.

• Journal of Korea Water Resources Association
• /
• v.41 no.3
• /
• pp.293-303
• /
• 2008

Reservoir turbidity flows degrade the efficiency and sustainability of water supply system in many countries located in monsoon climate region. A decision support system called RTMMS aimed to assist reservoir operations was developed for the real time monitoring, modeling, and management of turbidity flows induced by flood runoffs in Daecheong reservoir. RTMMS consists of a real time data acquisition module that collects and stores field monitoring data, a data assimilation module that assists pre-processing of model input data, a two dimensional numerical model for the simulation of reservoir hydrodynamics and turbidity, and a post-processor that aids the analysis of simulation results and alternative management scenarios. RTMMS was calibrated using field data obtained during the flood season of 2004, and applied to real-time simulations of flood events occurred on July of 2006 for assessing its predictive capability. The system showed fairly satisfactory performance in reproducing the density flow regimes and fate of turbidity plumes in the reservoir with efficient computation time that is a vital requirement for a real time application. The configurations of RTMMS suggested in this study can be adopted in many reservoirs that have similar turbidity issues for better management of water supply utilities and downstream aquatic ecosystem.

• Convergence Security Journal
• /
• v.11 no.5
• /
• pp.99-108
• /
• 2011

The purpose of this study is to profile actual conditions of personal information protection systems operated in overseas countries and examine major considerations of personal information that security service providers must know in the capacity of privacy information processor, so that it may contribute to preventing potential occurrence of any legal disputes in advance. Particularly, this study further seeks to describe fundamental idea and principle of said Personal Information Protection Act; enhancement of various safety measures (e.g. collection / use of privacy data, processing of sensitive information / personal ID information, and encryption of privacy information); restrictions on installation / operation of video data processing devices; and penal regulations as a means of countermeasure against leakage of personal information, while proposing possible solutions to cope with these matters. Using cases among foreign countries for this study. Possible solutions proposed by this study can be summed up as follows: By changing minds with sufficient legal reviews, it is required for security service providers to 1) clearly and further specify any purposes of collecting and using privacy information, if possible, 2) obtain any privacy information by legitimate means as it is necessary to collect such information, 3) stop providing any personal information for the 3rd parties or for any other purposes except fundamental purposes of using privacy information, and 4) have full knowledge about duty of safety measure in accordance with safe maintenance of privacy information and protect any personal information from unwanted or intentional leakage to others.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.732-741
• /
• 2001

In the relational database systems the join operation is one of the most time-consuming query operations. Many parallel join algorithms have been developed 개 reduce the execution time Multiple hash join algorithm using allocation tree is one of the most efficient ones. However, it may have some delay on the processing each node of allocation tree, which is occurred in tuple-probing phase by the difference between one page reading time of outer relation and the processing time of already read one. This delay problem was solved by using the concept of synchronization of page execution time with we had proposed In this paper the effects of the performance improvements in each node of the allocation tree are extended to the whole allocation tree and the performance evaluation about that is processed. In addition we propose an efficient algorithm for multiple hash joins in limited number of processor environments according to the relationship between the number of input relations in the allocation tree and the number of processors allocated to the tree. Finally. we analyze the performance by building the analytical cost model and verify the validity of it by various performance comparison with previous method.