• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1322-1324
• /
• 2002

For developing a 100 kW MCFC power generation system, Several design parameters for a fuel cell stack and system analysis results by Cycle Tempo, a processing computer soft ware, were described. Approximately 170 cells are required to generate 100 kW at a current density of 125 mA/$cm^2$ with 6000 $cm^2$ cells. An overall heat balance was calculated to predict exit temperature. The 100 kW power is expected only under pressurized operation condition at 3 atm. Recycle of cathode gas by more than 50% is recommended to run the stack at 125 mA/$cm^2$ and 3 atm. Manifolds should be designed based on gas flow rates for the suggested operating condition. The fuel cell power generation system was designed conceptually with several choices of utilization of anode exhaust gas. Also system efficiency was calculated at various type of system and operation conditions.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.145-150
• /
• 2006

At the furnace top, the distribution of charging coke and ore is adjusted to control the reducing gas flow distribution in the furnace. It is necessary to predict operation condition of blast furnace according to the burden profile to judge whether charging is properly conducted In this study, We propose the model for predicting while layer structures whithin furnace when top burden profile was given. Layer structure of coke and ore could be predicted by top burden profile and solid velocity. Solid velocity is assumed as potential flow. Potential function distribution and timeline are also calculated using solid velocity field. The Calculation is conducted for different burden profile cases. As the result burden distribution and grid structure, which is deformed to match the layer structure in shaft and deadman profile. Gas flow was calculated using this grid, and calculated results are compared with each other.

• 전기저널
• /
• 통권451호
• /
• pp.46-58
• /
• 2014

2013년 말, 전세계에 운행중인 원자력발전소 원자로는 434기로 총 용량은 371.6GW(e)이며, 이 중 약 80%는 20년 이상 사용되었다. 많은 회원국들은 최우선 순위로 자신들의 원자력발전소 운행 기간을 원래의 예상 기간인 30~40년 보다 길게 허용했다. 그렇다면 원자력발전소의 어려운 환경에서 기존의 케이블을 어떻게 적격 판정할 것인가. 본 원고는 원자력발전소의 저전압 케이블의 적격, 상태 모니터링 및 관리에 대한 연구 사항을 기술하였다.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2389-2391
• /
• 2015

본 논문은 전 이중 다중 안테나 셀룰라 네트워크에서 간섭 정렬 타당성을 다루고 있다. 간섭 정렬을 위한 필요충분조건 정립과, 달성 가능 합 자유도를 대칭 네트워크에 내에서 설명했다. 실험결과 기존 반 이중 통신의 합 자유도 보다 향상 되는 것을 확인 할 수 있다.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.10-17
• /
• 1991

An improved control method in turbine control system is proposed. By automatic follow-up design, power system frequency may be maintained within prespecified range. Base or half load control is possible by distributing power plant load allotment. Otherwise, diminutive frequency-load control is dine by governor-free operation in power plant. This paper proposes governor-free operation which is automatically followed by load-limitter setter. The condition which limits governor action may be somewhat improved within boiler condition by this idea. This design has been implemented at Samchunpo thermal power plant. The improved practical results are shown.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.287-292
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of journal bearing at high speed operation.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.25-35
• /
• 2015

This study presents the analysis of relationship between ship speed and local ice load on the Korean Icebreaker ARAON. The relationship curves were made from the data obtained at two areas: the Arctic and the Antarctic; and for two operation condition: the icebreaking condition in sea ice trial and general operation in ice covered sea. The strain data were converted to the equivalent stress value, and the influence of ship speed on the local ice load was analyzed and compared each other. These analysis results are useful in working on a statistically valid hull design approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.738_739
• /
• 2009

This paper describes the calculation of the equivalent circuit parameters according to the slip in squirrel-cage induction motor. Recently, the induction motor is demanded of the various operation condition. In order to acquire the accurate characteristic for the operation condition of the motor, equivalent circuit parameters have to be calculated accurately. So the equivalent circuit parameters are computed by using the finite element method, the reliable characteristic analysis is carried out by application of the parameter to the equivalent circuit analysis. From the analysis result using this combined equivalent circuit and finite element method is compared with the experimental results by a detailed equivalent circuit, the validity of the method is proved.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1139-1143
• /
• 2009

Pneumatic cylinder is widely used as key component of various industry fields just like automation production line. Recently, people begin to pay attention to reduce development period and cost of pneumatic cylinder so research requirements of accelerated life test of pneumatic cylinder have been increased more than ever. In this research, we shall evaluate availability of acceleration model by statistical analysis of acceleration model's predicted value and life data which acquired in a real operation condition after finish accelerated life test of pneumatic cylinder. Also to predict the life of pneumatic cylinder in the operation condition we shall develop new acceleration model equations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.340-343
• /
• 2007

In this paper, we present our method to reduce vibration of the base plate of a refrigerator by avoiding resonance between base plate and compressor operation. To verify the modes of the base plate, FE models of the base plate with free-free condition and applied boundary condition were built and validated by results from experimental modal analysis. Operating Deflection Shape analysis was applied to find the sensitive area on the base plate during compressor operation. In optimization process, Finite Difference Method - based sensitivity analysis is used to detect the most sensitive area. Finally, based on this numerical result, we will make beads on the base plate to reduce vibration of refrigerator.