• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2100-2108
• /
• 2001

The impinging tones by high-speed plane jets are experimentally investigated to study the edgetone characteristics. Experiment used a slit nozzle and a wedge system to generate edgetones. The jet in the experiment is varied from low to high subsonic speed to obtain the effect of the speed on the frequency characteristics of impinging tones. The experimental data obtained previously fur edgetones and platetones by various nozzles are compared with the present edgetone data. And the condition of tone generation, the frequency ranges, the effective source point and the sound pressure level are compared and discussed. It is found that the jet speed has no diect influence on the impinging tone characteristics. Regardless of the jet speed, the effective source point is about a quarter wavelength downstream from the edge tip. With increase in jet speed, the influence of the nozzle configuration is decreased and the operating frequencies show good coincidences by normalized parameters based on the slit thickness.

• Journal of Oriental Neuropsychiatry
• /
• v.19 no.3
• /
• pp.231-244
• /
• 2008

Insomnia is one of the highest frequency neuropsychosis of neuropsychiatry patients and is primarily caused by major depressive disorder. This case study is about a remedy for a 33 year-old woman who has insomnia and intense depressed mood caused by the continuous family jar. Also, she had the feeling of squeezing her body, pouring cold water into her body, anorexia and feeling cold and hot turn and turn. I operated mindfullness with accupuncture, herb-medication and aroma theraphy. Especially, mindfullness and Gagamguibi-tang were effective for relaxation and the sound sleep in quality and quantity. According to this study, the traditional oriental medical remedy such as accupuncture, herb-medication is effective for the cure of insomnia and mindfullness fortifies the oriental medical remedy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.1962-1969
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint is increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an encloser to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation of the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. In this paper, we investigated core noise reduction techniques to develope a low noise transformer. The techniques to reduce core noise of the transformer are application of high permeability grain oriented silicon sheets, decrease of magnetic flux density of core, application of 6step-lap core stacking method, improvement of core binding method(binding addition, band fixing) and application of rubber damper in oder to reduce transmission of core vibration, etc.

• Journal of Korea Multimedia Society
• /
• v.19 no.12
• /
• pp.1919-1926
• /
• 2016

The people who complain of pain due to voice causes such as vocal cord nodules is increasing year by year. If the voice is changed, it is possible to give to colleagues discomfort or inconvenience during conversation. In this paper, we propose a way to reduce discomfort by improving the husky voice during the conversation. A VBF (voice boosting filter) is firstly designed to improve the husky voices. This filter may further emphasize the formant frequency components than the frequency components around the formant frequency, because the value is relatively greater than the other frequency. And a fixed-point type DSP chipset, TMS320F2812 is applied to the system, the operating frequency is 150MHz. The system was implemented as a compact for use as a portable, its size is $2.5cm{\times}10cm$. Through the test using three husky voices with some type of statement, it was satisfactory in processing speed and sound quality improvement.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.35-40
• /
• 1997

The hysteresis control method has been frequently used for current control of power conversion equipments or motor drive systems. This method makes the measured signal follow the reference signal by changing the control signal whenever the error signal exceeds the preset band width. In this paper, hysteresis control method with fast response characteristics is applied for active noise control to suppress acoustic noise. Both Pentium processor and sound blaster 16 are used for experimental implementation, which executes A/D, D/A conversion and also is used as operating source of loudspeaker for audible noise cancellation.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.473-478
• /
• 2005

In home appliances, electric energy is optimally controlled by using power electronics technology, creating a comfortable environment in terms of energy saving, low sound generation, and reduced time consumption. Usually simplicity and robustness make the three phase induction motor attractive for use in domestic appliance, including washing machines. Two main fpes of domestic washing machine have evolved. We focus on the front loading machine favored in Europe, which has a horizontal drum axis. With the advent of electronic control, universal motor, with a phase controller operating directly from the ac source, has become popular in washing machine. The efficiency improvement in home appliances is very important for customers. Induction motor efficiency can be improved by means of loss reduction, which can be realized by motor selection and design, improvement of the waveforms supplied by power inverter, utilizing a suitable control method. So this paper describes the architecture and feature of washing machine fed induction motor drive under minimizing losses vector control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1759-1766
• /
• 2008

According to the increase of power demand and expansion of downtown, it is necessary to install transformers additionally in operating substations and construct substations in residential area. But the public complaint has been increased due to the transformer noise of the substation. KEPCO has used a vibration preventing pad, various soundproof walls and an encloser to transformers in outdoor substations, and a soundproof door, shutter and wind-path soundproof equipment in indoor substations to block the sound propagation from the transformers. But these noise reduction methods are not satisfied. It should be considered to reduce transformer noise itself. In this paper, we investigated tank noise reduction techniques to develope a low noise transformer. According to the mode analysis of transformer tank, we found out characteristics and locations of noise on the tank, and it's nature vibration was also analysed. On the basis of these analysis, reinforcement equipment was installed around transformer tank, and ellipse shape tank was changed to round shape tank. The effect of noise reduction was evaluated using noise generation source.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.1
• /
• pp.11-19
• /
• 2013

A video-zoom driven audio-zoom algorithm is proposed to provide audio zooming effects according to the degree of video-zoom. The proposed algorithm is designed based on a super-directive beamformer operating with a 4-channel microphone array in conjunction with a soft masking process that uses the phase differences between microphones. The audio-zoom processed signal is obtained by multiplying the audio gain derived from the video-zoom level by the masked signal. The proposed algorithm is then implemented on a portable digital imaging device with a clock speed of 600 MHz after different levels of optimization, such as algorithmic level, C-code and memory optimization. As a result, the processing time of the proposed audio-zoom algorithm occupies 14.6% or less of the clock speed of the device. The performance evaluation conducted in a semi-anechoic chamber shows that the signals from the front direction can be amplified by approximately 10 dB compared to the other directions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.742-746
• /
• 2008

With the trend of factory automation, nowadays, much industrial machinery tends to be put into 24-hours operation a day. However, these trends in industrial equipments also increase the possibility of various mechanical problems and bring about innumerable maintenance cost. There is a strong need of the condition monitoring and diagnosis for industrial equipment, especially rotating machinery, since they are connected not only to the reduction in the maintenance costs but also connected to the enhancement of production efficiency. Generally, to evaluate the operating conditions in the machinery in the industrial field, various physical properties are monitored. Among them, vibration and Noise signals are the mist important indicator and it is effectively used in many diagnosis systems for machinery. Much previous research is based in the FFT (Fast Fourier Transform) method. The spectral analysis is assumed that the signal is stationary. However, almost random signals are non-stationary. The wavelet transform has been recognized an efficient Method. Most interesting sounds have time-varying features. Signal processing techniques for the analysis of transient sound have been not clearly given yet.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.1
• /
• pp.42-47
• /
• 2002

Sirocco fans are widely used in HVAC and air conditioning systems, and the noise generated by these machines causes one of the most serious problems. In general, the sirocco fan noise is often dominated by tones at BPF(blade passage frequency) and broadband noise. However, only a few researches have been carried out on predicting the aeroacoustic noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to develop a prediction method for the unsteady flow field and the acoustic pressure field of a sirocco fan. We assume that the impeller rotates with a constant angular velocity and the flow field around the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowson\`s method is used to predict the acoustic source. Reasonable results are obtained not only fur the tonal noise but also far the amplitudes of the broadband noise. Acoustic pressure is proportional to (Ω)2.3, which is the similar value with the measured data.