• Journal of the Korean Society of Safety
• /
• v.39 no.3
• /
• pp.7-13
• /
• 2024

This study examines the physical characteristics of self-regulating heating cables caused by increased temperature and fire risk due to local degradation. A thermo hygrostat system, a convection dryer, a digital multimeter (Agilent 34465 A), NI DAQ, and the LabVIEW program were used to assess the physical properties in response to temperature fluctuations. As the temperature increases, the resistance of the self-regulating heating cable increases; however, when the critical point is exceeded, the resistance sharply decreases. A problem arises when the resistance value cannot return to its original state even though the temperature is lowered to the initial state. Moreover, when the ambient temperature rises while power is applied, the resistance value initially increases, and the flowing current decreases, maintaining a constant state. However, when the critical temperature is exceeded, the flowing current increases because of a rapid decrease in the resistance value, progressing to ignition. When the resistance value decreases because of the deterioration of one local area, the total resistance value becomes less than the initial resistance value. Therefore, the flowing current increases and an ignition problem occurs at one location where deterioration occurs. Despite the sustained flames and arcs resulting from the changes in the overall physical properties of the self-regulating heating cable and resistance variations due to local decline, the fire continued as the flowing current was lower than the operating current of the circuit breaker, failing to cut the power. In the case of self-regulating heating cables and heating wires, which are the leading causes of fires in winter, efforts are needed to ensure the need for periodic maintenance and the use of KS-certified products.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.53-57
• /
• 2010

This study proposes the algorithm which drives the powerless without battery. The exiting wire or RF type dosimeter, which is the computation of the real time with battery on the dose radiation exposure, In the Wired dosimeter, it is trouble to need the maintenance and management by periods. Besides, the case of the RF typed dosimeter with battery, it is requested to size bigger and to replace battery frequently and so on. Especially RF typed dosimeter has trouble to need for the embody with large power consumption on the contactless typed dosimeter. As the method for the low power, the study designed to be down the operating clock of the MPC, to improve the efficiency of the rectifier, to eliminate the external memory and the DC-DC converter for the simplification of the circuit We convince our research contributes not only to understand the simplified circuit and miniaturization, but also to help the design and application technology of the powerless dosimeter.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.5
• /
• pp.223-230
• /
• 2008

Dynamic update of kernel can change kernel functionality and fix bugs in runtime. Dynamic update is important because it leverages availability, reliability and flexibility of kernel. An instruction-granularity update technique has been used for dynamic update. However, it is difficult to apply update technique for a commodity operating system kernel because development and maintenance of update code must be performed with assembly language. To overcome this difficulty, we design the function-granularity dynamic update system which uses high-level language such as C language. The proposed update system makes the development and execution of update convenient by providing the development environment for update code which is same for kernel development. We implement this system for Linux and demonstrate an example of update for EXT3 file system. The update was successfully executed.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.259-266
• /
• 2020

This study analyzes the effects of the obsolescence assets on the asymmetry of costs. Cost asymmetry refers to a lower percentage of costs when sales fall than increases in costs when sales increase. the obsolescence asset induces various decisions, including high maintenance costs and management improvements and replacement of facilities. This study is to analyze the cost behavior according to those decisions. The analysis showed that the higher the obsolescence of assets rate, we found cost elasticity, with a greater reduction in costs when sales decrease than the increase in costs when sales increase. Second, the lower the cost will not appear as the obsolescence of assets rate increases in case that the concentration of an item of property, plant and equipment is high, and when sales decrease. The above result means that the obsolescence of assets rate acts as operating risk and thus operates resources flexibly according to changes in sales, but when the concentration of property, plant and equipment is high, the decision-making constraint make it difficult for the flexible operation.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.137-146
• /
• 2001

Pavement distresses are one of the most important data for pavement management systems. Inspection machines and its related programs have been used for operating tools in PMS developed in advanced countries. In Korea imported machines and programs for the length price ale utilized to get information of pavement condition from the field This study is launched for developing the program which can detect cracks on asphalt pavement due to many drawbacks in current PMS operation such as improper maintenance work and long resting period when it was broken. The focus of this study is to define principles to analyze pavement surface with digital image processing techniques, to test property of pavement images and to suggest an algorithm that reduces noises at test. To test images, the camera attached on the Automatic Road Analyser(ARAN) was used. Through the FFT images, histogram and statistical values of pavement images, it was found that the images had many noises with high-frequency components against general images, and it was difficult to subdivide pavement images into background or crack. Through several testing with various filters for noise reduction a 3X3 median filter was suggested to reduce noises effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.827-832
• /
• 2002

The development of dedicated network management system is essential to meet the following conditions: the system must run the configuring and repair processing for the dedicated communication network, and can manage new next generation data dedicated communication network of various types. In general it is effective that the system is consisted of decentralized module to be accessible for business logic and datum to remote area. To solve these problems, a method is to use object-oriented design techniques. That is, it is to abstract reusability objects and make component module using the abstracted objects. In this paper, we propose a management system of dedicated communication network service using object-oriented design techniques which are UML(Unified Modeling Language).

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.99-106
• /
• 2015

This is a case study on organizational learning with action learning. It targets B industry belonging to Shoe manufacturer. We apply action learning techniques as consulting skills to promote the organization of specific learning activities. Action Learning solves the challenges faced by the company with the ability to enhance the member while participating in the program. Therefore, it is a good methodology to overcome the uncertainty environment. Through a case study, in the maturing process of a learning organization can see the conditions that are necessary for the ongoing maintenance of that identity, organizational learning activities. Findings to the continued operation of the enterprise learning organization suggest the establishment of a learning organization, and direction and strategic importance. Systems and learning environments should be built and then repeat the process of practice to master the new learning organization. It suggests to learn a new organizations operating methods that require repetition of the course of action.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.67-72
• /
• 2010

In this paper, we verify the driverless operation possibility of MBS, which could overcome the defects of conventional track-circuit-based FBS, such as additional needs of maintenance and others problems according to short-circuit sensibility and, and which could allow the minimal interval between trains. With MBS, we can expect the reduction of headway, then the increase of transportation demand, and the protection of unnecessary speed variation because it allows the real time detection of train position from central office, and direct transmission of data between preceding trains and the following ones. In addition, it is possible to reduce the number of wayside-equipment substantially, to improve the passenger service, and to the achieve the positive economic effects by comfortable ride.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.145-150
• /
• 2004

A protocol for the web-based GPS data processing system has been developed. The system is developed following the typical ASP system, in which the GPS data acquired by various users can be uploaded through the web and the data is processed with data processing components selected by the users. After the processing, the results are also transported to the users through the web. The developed system is designed for easy software upgrade and it is an synchronous process mode so that the multiple accesses can be handled with high user flexibility. The database components for the efficient GPS data maintenance are developed so that the data from CORS can be used for the data processing. Currently, the absolute and relative positioning algorithms using code measurements are integrated and much more algorithms such as the data quality control, absolute and relative positioning using phases will be integrated in near future.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.81-92
• /
• 2003

A protocol for the web-based GPS data processing system has been developed. The system is developed following the typical ASP system, in which the GPS data acquired by various users can be uploaded through the web and the data is processed with data processing components selected by the users. After the processing, the results are also transported to the users through the web. The developed system is designed for easy software upgrade and it is an asynchronous process mode so that the multiple accesses can be handled with high user flexibility. The database components for the efficient GPS data maintenance are developed so that the data from CORS can be used for the data processing. Currently, the absolute and relative positioning algorithms using code measurements are integrated and much more algorithms such as the data quality control, absolute and relative positioning using phases will be integrated in near future.