• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1696-1698
• /
• 1999

The methastable state diamond films have been deposited on Si substrates using MWPCVD. Effects of each experimental parameters of MWPCVD including $CH_4$ conentrations, Oxygen additions, Operating pressure, etc. on the growth rate and crystallinity were invesitigated. The best crystallinity of the film at 3% methane concentration addition of oxygen to the $CH_4-H_2O$ mixture gave an improved film crystallinity at 50% oxygen concentration. Upon increasing the operating pressure, the growth rate and crystallinity were increased simultaneously.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.153-161
• /
• 1997

This paper has proposed the modelling by simulation in order to evaluate the performance of process through discrete event simulation using SIMAN language in flexible manufacturing systems. The production system is assumed to be a job shop type of system under the batch production of discrete products. In this paper, the input data is the workstation(process) time, the number of workstation(process), a probability distribution, the number of simulation runs. Also, transient period is considered. In the case study, this paper deals with three products in real flexible manufacturing systems. Finally, a number of simulation runs were executed under different experimental conditions to obtain preliminary statistics on the following performance measures: operating rate of facility and average system operating rate, transient period, central processing unit, average system throughput, and average waiting time in queues.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.140-140
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are $20{\sim}70^{\circ}C$ on stack temperature and 1~8L/min on $H_2$ volume.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.24-30
• /
• 1999

A biological filter for treatment of toluene among volatile organic compounds was studied. The investigation was conducted using specially built stainless steel columns packed with granular activated carbon and cold for removal of toluene. The G.A. and mold as filter material was also coated with Pseudomonas putida microorganisms.The biofilter unit was operated in the condition of moisture content vairation at gas loading rate of 12.5 l/min. Gaseous toluene taken from tedlar bag was analyzed by the use of G.C equipped with F.I.d detector. The removal efficiency of gaseous toluene was 95% at average inlet concentration of 950 ppm during bio-degradation operating condition. Effective removal efficiency was obtained with moisture content 27.5% at activated carbon and 32% at mold in this study. The effective operating condition were obtained with pH 6-8, temperature 28-42℃ for microbial degradation at gas loading rate of 12.5 l/min in packed material.

• Journal of Hydrogen and New Energy
• /
• v.2 no.1
• /
• pp.39-46
• /
• 1990

In order to improve the power of hydride heat pump, prototype heat pump was constructed using $Zr_{0.95}Ti_{0.05}Cr_{0.9}Fe_{1.1}$-$Zr_{0.9}Ti_{0.1}Cr_{0.6}Fe_{1.4}$ which had very good hydrogenation properties. The power changed with operating parameter such as cycle time, air flow rate, and temperature of hot air was investigated. The power shows maximum value with cycle time. The power increased with air flow rate and temperature of hot air. The power of the heat pump was $65-72 Kcal/Kg-alloy{\cdot}h$ under optimum operating condition, which was superior to that the system using $LaNi_{0.9}Al_{0.3}-MmNi_{4.15}Al_{0.66}Fe_{0.2}$ alloy pairs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.553-558
• /
• 1998

We present in this paper the ture union bound of the performance of chip level detection for coded DS/CDMA system operating in Rician fading channels such as LEO satellite mobile radio where the maximum doppler frequency is very high. The main objective of this paper is to calculate the exact doe union bound of BER performance of different performance of different quadrature detectors and to find a optimum spreading factor as a function of fade rate. The rationale of using multiple chip detection is to reduce the effective fade rate or variation. We considered chip level differential detection, chip level maximum likelihood sequence estimation, noncoherent detection and coherent detection with perfect channel state information as a reference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.501-509
• /
• 2010

In this paper, the interference avoidance performance of the RFID reader with the compressive receiver was analyzed. In the environment of the multiple dense readers operating, the recognition rates of the conventional RFID reader and the proposed RFID reader with the compressive receiver were measured and compared. The recognition rate of the proposed reader was improved more than 2.7 times compared to the conventional reader. Especially, in the environment of two proposed RFID readers operating simultaneously, little degradation of the recognition rate was observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.161-171
• /
• 2002

This paper presents a linear motor, which generates large thrust with a low operating rate. In industrial fields there is a need for actuators that work with a low duty cycle but generate large thrusts. An example of such a case is provided by the actuators for ejector mechanisms in electric injection molding machines. The ordinary LSM (linear synchronous motor) is unsuitable for this large-thrust and low-operating-rate usage, because of its large size and high cost. This paper contains experimental results on linear motors that can generate large thrusts for a short time, and which can be cheaply produced. The described linear motor could be contained space of $250mm \times250mm\times 250mm$ and generate a maximum thrust of about 20000 N at a current of 250 A.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.320-330
• /
• 2008

This paper presents an improved dynamic programming (IDP) approach to solve the economic power dispatch problem including transmission losses in power systems. A detailed mathematical derivation of recursive dynamic programming approach for the economic power dispatch problem with transmission losses is presented. The transmission losses are augmented with the objective function using price factor. The generalized expression for optimal scheduling of thermal generating units derived in this article can be implemented for the solution of the economic power dispatch problem of a large-scale system. Six-unit, fifteen-unit, and forty-unit sample systems with non-linear characteristics of the generator, such as ramp-rate limits and prohibited operating zones are considered to illustrate the effectiveness of the proposed method. The proposed method results have been compared with the results of genetic algorithm and particle swarm optimization methods reported in the literature. Test results show that the proposed IDP approach can obtain a higher quality solution with better performance.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1490-1492
• /
• 1998

The methastable state diamond films have been deposited on Si substrates using MWPCVD. Effects of each experimental parameters of MWPCVD including $CH_4$ conentrations, Oxygen additions, Operating pressure, etc. on the growth rate and crystallinity were invesitigated. The best crystallinity of the film at 3% methane concentration addition of oxygen to the $CH_4-H_2O$ mixture gave an improved film crystallinity at 50% oxygen concentration. Upon increasing the operating pressure, the growth rate and crystallinity were increased simultaneously.