• Asian Journal of Innovation and Policy
• /
• v.10 no.3
• /
• pp.330-354
• /
• 2021

To know the long-term growth patterns and determinants of successful startups, 15-year (2006-2020) panel data of 252 companies that had a growth rate of over 20% every year in the last three years were used. In the first analysis, statistics on the period required to designate a gazelle company or listed on the stock market were examined. In addition, five long-term growth patterns were presented. In the panel analysis, the R&D intensity, operating profit ratio, size, and age of the company were pointed out as determinants of growth. The operating profit margin and R&D intensity have a positive effect on growth. Gibrat's law was not supported, but an inverted U-shape was observed. Jovanovic's law was confirmed. Although many studies tend not to point to profitability as a determinant of long-term growth, this is an important long-term growth factor of a company. The operating profit ratio was used in this study.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.1
• /
• pp.1-11
• /
• 1985

Solar/absorption cooling system was analyzed and its operating condition was examined. For the system, the optimum size of absorption refrigerator and collector area should be determined. As the temperature of water supplied to the generator increases, the collector efficiency decreases whereas the coefficient of performance of absorption refrigerator increases up to a certain point, and vice versa for decreasing of the temperature of water supplied to the generator . Thus if the reeling load is given, the appropriate operating condition can be determined between the two opposing trends by simulation program. As an example of the simulation, the case of Jejudo province was studied. Under the conditions (such as weather data and prices of components, etc.) given en the sample calculation, the result shows that the optimum temperature of water supplied to the generator turned out to be $80.3^{\circ}C$, and still shows a large economical disadvantage in present stage compared to the case of conventional vapor compression cooling/heating combined heat pump system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.79-88
• /
• 2015

In any production and construction of geospatial information covering surveying, survey control point is a vital geospatial information. Survey control points in South Korea are currently classified as following: national control points, public control points, and cadastral control points. Each of these different categories of survey control points act as a basis and sets perimeters for the production, management and operation of subjects within the category. Universal standard, the unified format between different survey control points, also, are not yet defined, causing difference in basic information provided by altering categories and disturbance in connecting, managing, utilizing and operating survey control points. Establishment of a standard regarding survey control points, is therefore required for the efficacy of their utilization. This study, to solve such inadequacies, selects management items for creation of standardized survey control point, by investigating domestically and internationally the status of operating survey control points, determining data model for management, establishing TTA and agency standards, and establishing of activation methodology for survey control point standards.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2005

As the maximum power operating point(MPOP) of the Photovoltaic(PV) power systems alters with changing atmospheric conditions, the efficiency of maximum power point tracking(MPPT) is important in PV power systems. Many MPPT techniques have been considered in the past, but techniques using microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different PV arrays. In this paper, the author analyzes and studies two MPPT algorithms, which is named P&O(Perturbation and Observation) and IncCond(Incremental Conductance). Also, the author proposes Hysterisis-band alteration algorithm. To show the excellency of new Hysterisis-band alteration, the author suggests three references; 1) Comparing three MPPT algorithms in the steady-state condition, 2) Representing irradiation variation rapidly, 3) Showing MPPT efficiency. MPPT simulation and experiment perform in the boost converter.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.70-80
• /
• 2018

A novel strategy based on a zero common mode voltage pulse-width modulation (ZCMV-PWM) technique and zero-sequence circulating current (ZSCC) feedback control is proposed in this study to eliminate ZSCCs between three-level neutral point clamped (NPC) voltage source inverters, with common AC and DC buses, that are operating in parallel. First, an equivalent model of ZSCC in a three-phase three-level NPC inverter paralleled system is developed. Second, on the basis of the analysis of the excitation source of ZSCCs, i.e., the difference in common mode voltages (CMVs) between paralleled inverters, the ZCMV-PWM method is presented to reduce CMVs, and a simple electric circuit is adopted to control ZSCCs and neutral point potential. Finally, simulation and experiment are conducted to illustrate effectiveness of the proposed strategy. Results show that ZSCCs between paralleled inverters can be eliminated effectively under steady and dynamic states. Moreover, the proposed strategy exhibits the advantage of not requiring carrier synchronization. It can be utilized in inverters with different types of filter.

• Journal of Digital Convergence
• /
• v.19 no.8
• /
• pp.195-203
• /
• 2021

This study is about building an exercise training system that analyzes images taken of a person's whole body and displays the normal operating range for user-specific movements as images. This study analyzes the front and side of the user's body based on the standing point, sets the node in the joint position of the human body, and places the node in the spatial coordinate system from the point of entry, and calibrates the normal node operating range according to the set standard node coordinate. Therefore, the method of the study presented a method to select differentiation from this study through prior technical research and literature research, and the purpose of the study is to establish a exercise training system accordingly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4349-4356
• /
• 2015

This study examine operating system for eco-friendly container terminal and shows the usefulness of the Importance-performance analysis grid in evaluating container terminal operating technology. Importance-performance analysis enables management to evaluate and identify the major strengths and weaknesses of eco-friendly container terminal operating technology's key success factors. This study identified a list of 20 items from the eco-friendly container terminal literature reviews, and each item was rated using a 5-point Likert scale. Responses were obtained from 250 questionnaires. The importance-performance grid shows that 13 items fall into the "Keep up the good work" quadrant, 2 items fall into the "Concentrate here" quadrant, 2 items fall into the "Low priority" quadrant, and 3 items fall into the "Possible overkill" quadrant. The findings suggest that an eco-friendly container terminal operating technology is necessary to enhance eco-friendly operating system. The results are useful in identifying areas for strategic focus to help container terminal managers develop eco-friendly container terminal operating technology strategies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.265-266
• /
• 2009

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.109-114
• /
• 1996

Generally, the size of our recreation sites is selected through use demand at the peak day. At same time, scale economic and diseconomic are applied to a recreation site. If you are a rational decision-maker, you would like to select the size of your park at profit-maximization point. This study is the first try for modelling a Gain-Loss by the size options of a theme park. For testing the validity of a financial model to select the size of theme parks. Ever-Land, Seoul-Land, Dream-Land's operating size was analyzed. By the size options, the revenue of each park was compared with cost. The profit-maximization point and break-even point of each park were found. Ever-Land and Dream-Land's size was selected between the profit-maximization point and the break-even point. In contrast with Ever-Land and Dream-Land's, Seoul-Land's was selected upper the break-even point. To increase the utility of this model in selecting the size of a theme park, a decision-maker must keep in mind a few limits of this study. That is, 1) this model can not be applied at public parks. 2) Sometimes the others can be more important than financial revenue and cost. Finally, there is the validity of Gain-Loss Model in estimating only the financial revenues and costs through the size options.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.764-769
• /
• 2014

This paper describes sheath voltage limiter(SVL) transient characteristics by switching overvoltage considering single point bonding in underground transmission cables. The crossbonding system is generally used for grounding methods of underground transmission system. However, the single point bonding system is used in selective area which is difficult to consist of crossbonding major section. The sheath voltage limiters are connected between joints in the single point bonding. Specially, the high overvoltage might be generated in that section as well as the aging of sheath voltage limiter might be progressed by various electrical stress including lightning overvoltage, switching overvoltage and power frequency overvoltage. Therefore, in this paper, the switching overvoltage characteristics in underground cables are firstly analysed using EMTP simulation. Then, the switching overvoltage of sheath voltage limiter is also studied in single point bonding. Finally, the reduction method of sheath voltage limiter switching overvoltage is proposed by various simulation studies including circuit breaker operating order.