• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.639-644
• /
• 2009

This study presents the new idea of liquid desiccant system with extended surface to reduce the system size. The extended surface is inserted between vertical cooling/heating tubes to increase the mass transfer area, and the liquid desiccant flows through the tube wall and the extended surface. Mathematical models for heat and mass transfer between liquid desiccant and air stream at tube wall and extended surface are provided. Dimensionless design parameters governing heat and mass transfer phenomena around the tube and the extended surface are identifier, and dimensionless operating parameters depicting system operating condition including flow rate ratio between dehumidification/regeneration processes, and mass flow rate ratio between air stream and liquid desiccant are explained. The effects of the parameters on system performance are summarized.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.54-59
• /
• 2002

It can be effective on failure diagnosis of oil-lubricated tribological system to analyze operating conditions with morphological characteristics of wear debris in a lubricated machine. And it can be recognized that results are processed threshold images of wear debris. But it is needed to analyse and identify a morphology of wear debris in order to predict and estimate a operating condition of the lubricated machine. If the morphological characteristics of wear debris are identified by the computer image analysis and the neural network, it is possible to recognize the friction condition. In this study, wear debris in the lubricating oil are extracted from membrane filter (0.45 ${\mu}m$) and the quantitative value fur shape parameters of wear debris was calculated through the computer image processing. Four shape parameters were investigated and friction condition was recognized very well by the neural network.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.156-161
• /
• 1998

The purpose of this paper is to determine circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Firstly, the operating frequency characteristics are investigated by varying circuit parameters of electronic ballasts and are matched with the output characteristics of dimming ballast controller. Secondly, circuit parameter values are determined by using PSpice simulation and operating frequency characteristics. Finally its validity is verified from the electrical and light output characteristics on the prototype of the electronic dimming ballast.

• Journal of Korean Neurosurgical Society
• /
• 제44권2호
• /
• pp.63-66
• /
• 2008

Objective : The purpose of this study is to investigate the correlation between various transcranial Doppler (TCD) ultrasonography parameters and clinical vasospasm after aneurysmal subarachnoid hemorrhage (SAH). Methods : This study enrolled 40 patients presented with aneurysmal SAH between September 2006 and August 2007. We measured differences of mean blood flow velocity (BFVm), highest systolic blood flow velocity (BFVh), and Lindegaard ratio (LR) in the middle cerebral artery on TCD examination. These parameters were evaluated for correlation with clinical vasospasm by univariate analysis and the receiver operating characteristic analysis. Results : Twelve patients (30%) developed clinical vasospasm. The best TCD parameters for the detection of clinical vasospasm were revealed to be differences of BFVm, BFVh, and LR values between $1^{st}$ TCD test and $3^{rd}$ TCD (7 cm/s. 11.5 cm/s, 0.45 respectively). The positive predictive value of anyone of three parameters was 60% and the negative predictive value was 100%. Conclusion : TCD is still considered a useful tool for screening clinical vasospasm. To confirm the predictive value of the above parameters. further prospective study will be needed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.487-488
• /
• 2006

In this paper, we analyzed the FBGA packages operating in high speeds and high frequency rates for DRAM. Using 3D simulations, we could extract s-parameters of packages. We realize that the proposed FBGA package does not operate properly at 3Gbps bacause the FBGA package have delta-I noise($V_{{\Delta}I-peak}$) of 132.0mV and crosstalk of 300mV, which is 25% of the operating clock level.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.603-610
• /
• 2009

Ice load is one of the important design parameters for the construction of icebreaking vessels. In this paper, the design ice load prediction for the icebreaking vessels under normal operating condition in ice-covered sea is discussed. The ice loads under normal operating condition are expected from sea trials in moderate ice conditions. In this sense the extreme ice loads during heavy ramming or accidental collision are not considered. Current study describes the global ice load on the hull of the icebreaking vessels. Available ice load data from full-scale sea trials are collected and analyzed according to various ship-ice interaction parameters including displacement, stem angle, speed of a ship and flexural strength and thickness of sea ice. The ice load prediction formula is compared with the collected full-scale sea trials data and it shows a good agreement.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.104-110
• /
• 2018

액체로켓엔진 작동 모드 해석은 엔진 개발과정에서 설계/시험/분석을 위한 필수 도구이다. 구성품 수락시험 결과를 반영한 엔진 작동 모드 해석은 엔진 시험 결과와 차이를 보인다. 가스발생기 사이클 엔진 작동점 해석 모델에서 엔진 시험 결과를 재현하기 위한 성능 인자를 파악하고 보정 방법을 정의하였다. 연소기, 가스발생기, 터보펌프의 성능과 연소기 배관, 가스발생기 배관의 유량 계수를 보정하여 시험결과와 같은 유량, 압력, 터보펌프 회전수 등 엔진 성능 변수에 상응하는 엔진 해석 모델을 얻었다. 성능 인자 보정을 적용하여 한국형 발사체용 75톤급 엔진의 시스템 해석 모델을 획득하였다.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.694-699
• /
• 2009

Combined cycle plants which feature distinct advantages for power generation such as fast response, high efficiency, environmental friendliness, fuel flexiblity represent the majority of new generating plant installations across the globe. Combined cycle plants have different operating modes where the operating parameters can differ greatly depending which mode is operating at the time. This paper addresses the bidding strategy model of combined cycle plants in a competitive electricity market by using a characteristic of multiple operating modes of combined cycle plants. Simulation results of case studies show that an operating mode among multiple ones is selected strategically in generation bidding for more profit of generation company.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.518-521
• /
• 1995

In this paper, a learning control problem is formulated for cooperating multiple-robot manipulators with uncertain system parameters. The commonly held object is also assumed to be unknown and the multiple-robots themselfs experience uncertain operating conditions such as link parameters, viscous friction parameters, suctions, actuator bias, and etc. Under these conditions, the learning controllers designed for learning of uncertain parameters and robot control inputs for multiple-robot systems are shown to drive the multiple-robot manipulators to follow the desired Cartesian trajectory with the desired internal forces to the unknown object.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.86-92
• /
• 2003

To analyze the characteristics of ozone formation, measurements of the concentrations of individual exhaust hydrocarbon species have been made under various engine operating parameters in a 2-liter 4-cylinder engine for natural gas and LPG. Tests were performed at constant engine speed, 1800 rpm for two compression ratios of 8.6 and 10.6, with various operating parameters, such as excess air ratio of 1.0~1.6, bmep of 250~800 na and spark timing of BTDC 10~$55^{\circ}$. It was found that the natural gas gave the less ozone formation than LPG in various operating conditions. This was accomplished by reducing the emissions of propylene($C_3H_6$), which has relatively high maximum incremental reactivity factor, and propane($C_3H_8$) that originally has large portion of LPG. In addition, the natural gas show lower values in the specific reactivity and brake specific reactivity. Higher compression ratio of the test engine showed higher non methane HC emissions. However, specific reactivity value decreased since fuel species of HC emissions increase. brake specific reactivity showed almost same values under high bmep, over 500kPa for both fuels. This means that the increase of non methane HC emissions and the decrease of specific reactivity with higher bmep affect each other simultaneously. With advanced spark timing, brake specific reactivity values of LPG were increased while those of natural gas showed almost constant values.