• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.4
• /
• pp.419-429
• /
• 2022

The aim of this research is to examine how globalization affects coffee exports in the producing countries. This research used secondary data obtained from the International Coffee Organization, Pen World Table, World Bank, Food and Agricultural Organization, and KoF Globalization Index to achieve its goals. We used secondary data from 1990 to 2018 from various foreign databases. The research used a two-step system GMM (sys-GMM) to analyze the effect of globalization on coffee export in twenty-four producing countries. We found that export lag, gross domestic product (GDP), exchange rate, and the political globalization index (PGI) positively and significantly impact coffee exports. Meanwhile, coffee exports were unaffected by the level of export prices and the human capital index. Surprisingly, the trade globalization index has a negative impact on coffee exports. This demonstrates the unpreparedness of coffee-producing countries to face tough competition in trade globalization. The political globalization index, the final variable, has a positive impact on exports. With the opening up of world politics, it seems that the environment of democracy in producing countries is increasing. As a result, governments in these countries have adopted a policy of aggressively supporting coffee exports.

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.171-178
• /
• 2020

The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED₁₀) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.

• Journal of Trauma and Injury
• /
• v.36 no.3
• /
• pp.180-186
• /
• 2023

Purpose: The purpose of this study was to report the treatment results of patients with traumatic cardiac tamponade after the opening of Jeju Regional Trauma Center. Methods: We analyzed the treatment outcomes of patients with traumatic cardiac tamponade who were treated at Jeju Regional Trauma Center from January 2018 to August 2022. Results: Seven patients with traumatic cardiac tamponade were treated. The male to female ratio was 1.33:1 (four male and three female patients) and the average age was 60.3±7.2 years. The mechanism of injury was blunt trauma in six cases and penetrating injury in one case. Upon arrival at the emergency department, pericardiostomy was performed in four cases, and an emergency operation was performed in six cases. Pericardiostomy alone was performed in one patient, who had cardiac tamponade due to extrapericardial suprahepatic inferior vena cava rupture. The causes of cardiac tamponade were right atrium appendage rupture in one case, right ventricle rupture in one case, inferior vena cava rupture in two cases, right atrium and left atrium rupture in one case, both atria and left ventricle rupture in one case, and intercostal artery rupture in one case. In three cases, intraoperative cardiopulmonary bypass was required. Two of the seven patients died (mortality rate, 28.5%). Conclusions: Relatively favorable treatment results were observed for traumatic cardiac tamponade patients after Jeju Regional Trauma Center was established.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.802-810
• /
• 2003

In this paper, the modified singular fracture process zone (S-FPZ) model is proposed to consider variation of a fracture criterion for continuous crack propagation in concrete. The fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and crack closure stress (CCS) versus crack opening displacement (COD) relationship in the FPZ. The proposed model can simulate the estimated fracture energy of experimental results. The analysis results of the experimental data shows that specimen geometry and loading condition did not affect the CCS-COD relation. But the strain energy release rate is a function of not only specimen geometry but also crack extension. Until 25 mm crack extension, the strain energy release rate is a constant minimum value, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for an large size specimen. The fracture criterion remains the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localizing. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-tracking and micro-crack localizing behaviors of concrete.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.9-18
• /
• 2002

The aim of this study is to propose effective measures for shortage of manpower of dental technology laboratory in Gangwon province by means of examining not only the history of Gangwon association, present condition of transference of members of Gangwon association from 1990, of missing members and annual rate of participation in repair education with setting object of study into Gangwon association under the influence of the Korean Dental Technology Association but also the present condition of opening and closing laboratory, amount of business connection and condition of shortage of manpower and its field with setting object of study into 28 dental technology laboratories. Results from this study are like followings : First, Gagnwon association was established in 1984 as the eleventh in the line of the board, reorganization of board is conducted 8 times up to the eighth in the line of the board in 2001. board is composed of 16 persons including president and operated its term as 3 years. Second, a number of representative and ordinary member of Gangwon association has increased gradually from 1992 to 2001. in aspect of annual rate of participation in repair education, representative's is more higher than ordinary member's overall. the worst rate of whole members' is shown as 47.9% and the its best rate is shown as 92.0%. in addition, 70$\sim$80% rate of participation into repair education is shown most frequently as 8 times of whole 20 times from 1992 to 2001. Third, 29 authorized dental technology laboratories have registered in Gangwon association until march 2002 within 9 cities and counties. in consideration of establishment location. Gangneung city has most amount as 7 laboratories(24.1%), Wonju city has 5(17.2%), Samcheok city and Sokcho city, each has 4(13.8%), Chuncheon city has 3(10.3%), Donghae city and Taeback city, each has 2(6.9%) and Yangyang and Yongwol county, each has 1(3.4%). Fourth, amount of work personnel of laboratory in Gangwon province is 1$\sim$10 persons as the maximum value. 23 laboratories(82.1%) have their own work personnel as amount of 5 and below. in aspect of main business, most of laboratories focus on the Porcelain and Crown. and 16 laboratories(57.1%) have their own expensive equipments such as Milling. its also suggests that 16 laboratories(57.1%) suffer their shortage of working personnel. specifically, 6 laboratories(21.4%) suffer the highest shortage especially in Denture field, Fifth, whole number of Gangwon association is up to 101 members (28 representatives and 73 ordinary members) until December 31th 2001. amount of immune from repair education of Gangwon association until October 2001 is up to 10 persons, and missing members from 1997 is up to 18 persons, suspension of business is up to 4 persons. in aspect of transference from 1990, transfer-in is up to 21 persons and transfer out is up to 16 persons.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.788-801
• /
• 1998

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed ; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antennal beam width to cover entire hot-spot region in the space and, by compensating effective burst length throughcutting down man-made noises introduced by antennal. Based on the analysis, we are developed a small-opening-cavity antennal, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antennal exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antennal under same testing condition.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.16-22
• /
• 2017

In Korea, performance-based fire safety designs are being discussed to deal with the various risks of fire in complex and diverse types of structure. However, performance-based fire safety designs are not actively employed because it is difficult to estimate the fire characteristics related to the various factors in buildings. In this study, real scale fire tests were conducted based on fire severity levels and fire loads provided in He New Zealand Building Code, in order to use the results as guidelines and fundamental data for performance-based designs. In the real scale fire tests conducted in a 10MW full-scale calorimeter, wood cribs were placed in a $2.4(L){\times}3.6(W){\times}2.4(H)m$ mock-up of a compartment which had one $0.8(L){\times}2.0(H)$ opening for different fire loads and heating was continued until all of the wood cribs were burned down. The heat release rate started to increase rapidly 90 seconds after the wood cribs caught fire. In the test with a fire load level 1, the maximum heat release rate of 4743.4 kW was reached at 244 second. In the test with fire load level 2, a maximum heat release rate of 5050.9 kW was reached at 497 second. In the test with fire load level 3, a maximum heat release rate of 4446.9 kW was reached at 677 second.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.1 s.25
• /
• pp.136-145
• /
• 1989

This study made a descriptive analysis of the cumulative amount and rate of sports medical care utilization during the 24th Seoul Olympic Games by the participating athletes, officials, etc. The sports medical care utilization was a component of the total medical care use and was basically caused by the prevention and treatment of sports injuries. The analytic data were derived from the Olympic Health Management Information System(OHMIS) of the SLOOC and the Korea Athlete Trainer Association(KATA). These were analyzed according to the quantity of physician visits and the utilization rate, which was the amount of utilization divided by the total number of participating persons. The results were as follows: Firstly, the sports medical care utilization by the persons participating in the Seoul Olympics amounted to 17.9% of the total medical care utilization. The venue medical services utilization accounted for 54.7% of the total physician visits, which was larger than the village medical center's utilization. The number of physician visits per hundred persons during the 2 week period in the venue clinic was 3.03 and that of the village medical center was 2.51, therefore, the total was 5.54. Secondly, athletes accounted for 82.3% and officials 12.2% in the sports medical care utilization by participants. These results were because athletes, who were directly related to the games, called extremely often on the physicians. The utilization rate of sports medical care by athletes was 34.29. Thirdly, the sports medical demand according to type of therapy could be ranked from high to low in the following order: sports massage, thermal therapy, and electrical stimulation treatment, etc. The department of physical therapy in the village medical center was used a great deal. Fourthly, the trend of daily sports medical care utilization by the athletes showed a bell shape centering around the opening day of the Seoul Olympic Games. The utilization rate of athletes was 2.3; however, that of officials was 0.6. Lastly, the sports medical demand was calculated according to the continents, and Central America, Africa and Middle-East Asia proved to have a higher rate of sports medical care utilization than the more powerful and industrialized continent or regions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.1-6
• /
• 2019

The objective of this study was to investigate performance characteristics of thermal management system(TMS) in a fuel cell electric vehicle with 100kW Fuel Cell(FC) system. In order to build up analytic modelling for TMS, each component was installed and tested under various operating conditions, such as water pump, radiator, 3-Way valve, COD heater, and FC stack etc. and as the results of them, correlations reflecting component's characteristics with flow rate, air velocity were developed. Developed analytic modelling was carried out under various operating conditions on the road. To verify modelling's accuracy, after prediction for optimum coolant flow rate was fulfilled under certain operating conditions, such as FC system, water pump speed, opening of 3-way valve, and pipe resistance, analytic and experimental values were compared and good agreement was shown. In order to predict cold-start operating performance for analytic modelling, coolant temperature variation was analyzed with $-20^{\circ}C$ ambient temperature and duration was predicted to rise in optimum temperature for FC. Because there is appropriate temperature difference between inlet and outlet of FC stack to operate FC system properly, related analysis was performed with respect to power consumption for TMS and heat rejection rate and performance map was depicted along with FC operating conditions.

• Journal of the Korean Dietetic Association
• /
• v.8 no.4
• /
• pp.372-386
• /
• 2002

The purposes of this study were to find factor which influence on the selection criteria of food supplier. Questionnaire were distributed to 52 general hospitals with more than 400 beds located in Seoul and Kyongin province, and responded questionnaires were collected from 44 dietetic departments (84.6%) and 18 purchasing departments (34.6%). The main results of this study can be summarized as follows: (1) supplier selection criteria include quality, service, cost and supplier competency. (2) With having been met with tight competition and market opening, hospitals plan a strategy to improve quality, service and they tend to have more interest in various supplier selection criteria. (3) Purchasing departments estimate more highly the rate of reflection in considering supplier selection criteria than the rate of importance about cost criteria, which reveals that purchasing departments sensitively respond to cost cutdown. (4) When selecting suppliers, a significant(p<.01) influence of stability of supplier industry environment on the selecting criteria such as the importances of quality, service, and supplier quality are recognized only after recognizing the stability of food delivery industry. Food supplier industry secures stability more quickly through major companies' participation in food distribution industry and this will reveal the importance of supplier selection criteria. (5) Suppliers which are selected by the quality criteria, service criteria, supplier quality criteria make efforts to communicate with foodservice departments, to give more proper information about substitute food, new product, and to make commitments, while suppliers which are decided by cost criteria do not establish supportive relationships with foodservice departments.